firewall-cmd(1) - firewalld command line client
-
FIREWALL-CMD(1) firewall-cmd FIREWALL-CMD(1) NAME firewall-cmd - firewalld command line client SYNOPSIS firewall-cmd [OPTIONS...] DESCRIPTION firewall-cmd is the command line client of the firewalld daemon. It provides interface to manage runtime and permanent configuration. The runtime configuration in firewalld is separated from the permanent configuration. This means that things can get changed in the runtime or permanent configuration. OPTIONS For sequence options, this are the options that can be specified multiple times, the exit code is 0 if there is at least one item that succeded. The ALREADY_ENABLED (11), NOT_ENABLED (12) and also ZONE_ALREADY_SET (16) errors are treated as succeeded. If there are issues while parsing the items, then these are treated as warnings and will not change the result as long as there is a succeeded one. Without any succeeded item, the exit code will depend on the error codes. If there is exactly one error code, then this is used. If there are more than one then UNKNOWN_ERROR (254) will be used. The following options are supported: General Options -h, --help Prints a short help text and exits. -V, --version Print the version string of firewalld. This option is not combinable with other options. -q, --quiet Do not print status messages. Status Options --state Check whether the firewalld daemon is active (i.e. running). Returns an exit code 0 if it is active, NOT_RUNNING otherwise (see the section called “EXIT CODES”). This will also print the state to STDOUT. --reload Reload firewall rules and keep state information. Current permanent configuration will become new runtime configuration, i.e. all runtime only changes done until reload are lost with reload if they have not been also in permanent configuration. --complete-reload Reload firewall completely, even netfilter kernel modules. This will most likely terminate active connections, because state information is lost. This option should only be used in case of severe firewall problems. For example if there are state information problems that no connection can be established with correct firewall rules. --runtime-to-permanent Save active runtime configuration and overwrite permanent configuration with it. The way this is supposed to work is that when configuring firewalld you do runtime changes only and once you're happy with the configuration and you tested that it works the way you want, you save the configuration to disk. --get-log-denied Print the log denied setting. --set-log-denied=value Add logging rules right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones for the configured link-layer packet type. The possible values are: all, unicast, broadcast, multicast and off. The default setting is off, which disables the logging. This is a runtime and permanent change and will also reload the firewall to be able to add the logging rules. Permanent Options --permanent The permanent option --permanent can be used to set options permanently. These changes are not effective immediately, only after service restart/reload or system reboot. Without the --permanent option, a change will only be part of the runtime configuration. If you want to make a change in runtime and permanent configuration, use the same call with and without the --permanent option. The --permanent option can be optionally added to all options further down where it is supported. Zone Options --get-default-zone Print default zone for connections and interfaces. --set-default-zone=zone Set default zone for connections and interfaces where no zone has been selected. Setting the default zone changes the zone for the connections or interfaces, that are using the default zone. This is a runtime and permanent change. --get-active-zones Print currently active zones altogether with interfaces and sources used in these zones. Active zones are zones, that have a binding to an interface or source. The output format is: zone1 interfaces: interface1 interface2 .. sources: source1 .. zone2 interfaces: interface3 .. zone3 sources: source2 .. If there are no interfaces or sources bound to the zone, the corresponding line will be omitted. [--permanent] --get-zones Print predefined zones as a space separated list. [--permanent] --get-services Print predefined services as a space separated list. [--permanent] --get-icmptypes Print predefined icmptypes as a space separated list. [--permanent] --get-zone-of-interface=interface Print the name of the zone the interface is bound to or no zone. [--permanent] --get-zone-of-source=source[/mask]|MAC|ipset:ipset Print the name of the zone the source is bound to or no zone. [--permanent] --info-zone=zone Print information about the zone zone. The output format is: zone interfaces: interface1 .. sources: source1 .. services: service1 .. ports: port1 .. protocols: protocol1 .. forward-ports: forward-port1 .. source-ports: source-port1 .. icmp-blocks: icmp-type1 .. rich rules: rich-rule1 .. [--permanent] --list-all-zones List everything added for or enabled in all zones. The output format is: zone1 interfaces: interface1 .. sources: source1 .. services: service1 .. ports: port1 .. protocols: protocol1 .. forward-ports: forward-port1 .. icmp-blocks: icmp-type1 .. rich rules: rich-rule1 .. .. --permanent --new-zone=zone Add a new permanent and empty zone. --permanent --new-zone-from-file=filename [--name=zone] Add a new permanent zone from a prepared zone file with an optional name override. --permanent --delete-zone=zone Delete an existing permanent zone. --permanent --load-zone-defaults=zone Load zone default settings or report NO_DEFAULTS error. --permanent --zone=zone --set-description=description Set new description to zone --permanent --zone=zone --get-description Print description for zone --permanent --zone=zone --set-short=description Set short description to zone --permanent --zone=zone --get-short Print short description for zone --permanent [--zone=zone] --get-target Get the target of a permanent zone. --permanent [--zone=zone] --set-target=target Set the target of a permanent zone. target is one of: default, ACCEPT, DROP, REJECT Options to Adapt and Query Zones Options in this section affect only one particular zone. If used with --zone=zone option, they affect the zone zone. If the option is omitted, they affect default zone (see --get-default-zone). [--permanent] [--zone=zone] --list-all List everything added for or enabled in zone. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --list-services List services added for zone as a space separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-service=service [--timeout=timeval] Add a service for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The service is one of the firewalld provided services. To get a list of the supported services, use firewall-cmd --get-services. The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-service=service Remove a service from zone. This option can be specified multiple times. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --query-service=service Return whether service has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. [--permanent] [--zone=zone] --list-ports List ports added for zone as a space separated list. A port is of the form portid[-portid]/protocol, it can be either a port and protocol pair or a port range with a protocol. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-port=portid[-portid]/protocol [--timeout=timeval] Add the port for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp or udp. The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-port=portid[-portid]/protocol Remove the port from zone. If zone is omitted, default zone will be used. This option can be specified multiple times. [--permanent] [--zone=zone] --query-port=portid[-portid]/protocol Return whether the port has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. [--permanent] [--zone=zone] --list-protocols List protocols added for zone as a space separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-protocol=protocol [--timeout=timeval] Add the protocol for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols. The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-protcol=protocol Remove the protocol from zone. If zone is omitted, default zone will be used. This option can be specified multiple times. [--permanent] [--zone=zone] --query-protocol=protocol Return whether the protocol has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. [--permanent] [--zone=zone] --list-source-ports List source ports added for zone as a space separated list. A port is of the form portid[-portid]/protocol. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-source-port=portid[-portid]/protocol [--timeout=timeval] Add the source port for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp or udp. The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-source-port=portid[-portid]/protocol Remove the source port from zone. If zone is omitted, default zone will be used. This option can be specified multiple times. [--permanent] [--zone=zone] --query-source-port=portid[-portid]/protocol Return whether the source port has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. [--permanent] [--zone=zone] --list-icmp-blocks List Internet Control Message Protocol (ICMP) type blocks added for zone as a space separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-icmp-block=icmptype [--timeout=timeval] Add an ICMP block for icmptype for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The icmptype is the one of the icmp types firewalld supports. To get a listing of supported icmp types: firewall-cmd --get-icmptypes The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-icmp-block=icmptype Remove the ICMP block for icmptype from zone. If zone is omitted, default zone will be used. This option can be specified multiple times. [--permanent] [--zone=zone] --query-icmp-block=icmptype Return whether an ICMP block for icmptype has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. [--permanent] [--zone=zone] --list-forward-ports List IPv4 forward ports added for zone as a space separated list. If zone is omitted, default zone will be used. For IPv6 forward ports, please use the rich language. [--permanent] [--zone=zone] --add-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] [--timeout=timeval] Add the IPv4 forward port for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The port can either be a single port number portid or a port range portid-portid. The protocol can either be tcp or udp. The destination address is a simple IP address. The --timeout option is not combinable with the --permanent option. For IPv6 forward ports, please use the rich language. [--permanent] [--zone=zone] --remove-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] Remove the IPv4 forward port from zone. If zone is omitted, default zone will be used. This option can be specified multiple times. For IPv6 forward ports, please use the rich language. [--permanent] [--zone=zone] --query-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] Return whether the IPv4 forward port has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. For IPv6 forward ports, please use the rich language. [--permanent] [--zone=zone] --add-masquerade [--timeout=timeval] Enable IPv4 masquerade for zone. If zone is omitted, default zone will be used. If a timeout is supplied, masquerading will be active for the specified amount of time. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. Masquerading is useful if the machine is a router and machines connected over an interface in another zone should be able to use the first connection. The --timeout option is not combinable with the --permanent option. For IPv6 masquerading, please use the rich language. [--permanent] [--zone=zone] --remove-masquerade Disable IPv4 masquerade for zone. If zone is omitted, default zone will be used. If the masquerading was enabled with a timeout, it will be disabled also. For IPv6 masquerading, please use the rich language. [--permanent] [--zone=zone] --query-masquerade Return whether IPv4 masquerading has been enabled for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. For IPv6 masquerading, please use the rich language. [--permanent] [--zone=zone] --list-rich-rules List rich language rules added for zone as a newline separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-rich-rule='rule' [--timeout=timeval] Add rich language rule 'rule' for zone. This option can be specified multiple times. If zone is omitted, default zone will be used. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). The --timeout option is not combinable with the --permanent option. [--permanent] [--zone=zone] --remove-rich-rule='rule' Remove rich language rule 'rule' from zone. This option can be specified multiple times. If zone is omitted, default zone will be used. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). [--permanent] [--zone=zone] --query-rich-rule='rule' Return whether a rich language rule 'rule' has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). Options to Handle Bindings of Interfaces Binding an interface to a zone means that this zone settings are used to restrict traffic via the interface. Options in this section affect only one particular zone. If used with --zone=zone option, they affect the zone zone. If the option is omitted, they affect default zone (see --get-default-zone). For a list of predefined zones use firewall-cmd --get-zones. An interface name is a string up to 16 characters long, that may not contain ' ', '/', '!' and '*'. [--permanent] [--zone=zone] --list-interfaces List interfaces that are bound to zone zone as a space separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-interface=interface Bind interface interface to zone zone. If zone is omitted, default zone will be used. If the interface is under control of NetworkManager, it is at first connected to change the zone for the connection that is using the interface. If this fails, the zone binding is created in firewalld and the limitations below apply. For interfaces that are not under control of NetworkManager, firewalld tries to change the ZONE setting in the ifcfg file, if the file exists. As a end user you don't need this in most cases, because NetworkManager (or legacy network service) adds interfaces into zones automatically (according to ZONE= option from ifcfg-interface file) if NM_CONTROLLED=no is not set. You should do it only if there's no /etc/sysconfig/network-scripts/ifcfg-interface file. If there is such file and you add interface to zone with this --add-interface option, make sure the zone is the same in both cases, otherwise the behaviour would be undefined. Please also have a look at the firewalld(1) man page in the Concepts section. For permanent association of interface with a zone, see also 'How to set or change a zone for a connection?' in firewalld.zones(5). [--zone=zone] --change-interface=interface If the interface is under control of NetworkManager, it is at first connected to change the zone for the connection that is using the interface. If this fails, the zone binding is created in firewalld and the limitations below apply. For interfaces that are not under control of NetworkManager, firewalld tries to change the ZONE setting in the ifcfg file, if the file exists. Change zone the interface interface is bound to to zone zone. It's basically --remove-interface followed by --add-interface. If the interface has not been bound to a zone before, it behaves like --add-interface. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --query-interface=interface Query whether interface interface is bound to zone zone. Returns 0 if true, 1 otherwise. [--permanent] --remove-interface=interface If the interface is under control of NetworkManager, it is at first connected to change the zone for the connection that is using the interface. If this fails, the zone binding is created in firewalld and the limitations below apply. For the addion or change of interfaces that are not under control of NetworkManager: firewalld tries to change the ZONE setting in the ifcfg file, if an ifcfg file exists that is using the interface. Only for the removal of interfaces that are not under control of NetworkManager: firewalld is not trying to change the ZONE setting in the ifcfg file. This is needed to make sure that an ifdown of the interface will not result in a reset of the zone setting to the default zone. Only the zone binding is then removed in firewalld then. Remove binding of interface interface from zone it was previously added to. Options to Handle Bindings of Sources Binding a source to a zone means that this zone settings will be used to restrict traffic from this source. A source address or address range is either an IP address or a network IP address with a mask for IPv4 or IPv6 or a MAC address or an ipset with the ipset: prefix. For IPv4, the mask can be a network mask or a plain number. For IPv6 the mask is a plain number. The use of host names is not supported. Options in this section affect only one particular zone. If used with --zone=zone option, they affect the zone zone. If the option is omitted, they affect default zone (see --get-default-zone). For a list of predefined zones use firewall-cmd [--permanent] --get-zones. [--permanent] [--zone=zone] --list-sources List sources that are bound to zone zone as a space separated list. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --add-source=source[/mask]|MAC|ipset:ipset Bind the source to zone zone. If zone is omitted, default zone will be used. [--zone=zone] --change-source=source[/mask]|MAC|ipset:ipset Change zone the source is bound to to zone zone. It's basically --remove-source followed by --add-source. If the source has not been bound to a zone before, it behaves like --add-source. If zone is omitted, default zone will be used. [--permanent] [--zone=zone] --query-source=source[/mask]|MAC|ipset:ipset Query whether the source is bound to the zone zone. Returns 0 if true, 1 otherwise. [--permanent] --remove-source=source[/mask]|MAC|ipset:ipset Remove binding of the source from zone it was previously added to. IPSet Options --permanent --new-ipset=ipset --type=ipset type [--option=ipset option[=value]] Add a new permanent and empty ipset with specifying the type and optional options. --permanent --new-ipset-from-file=filename [--name=ipset] Add a new permanent ipset from a prepared ipset file with an optional name override. --permanent --delete-ipset=ipset Delete an existing permanent ipset. --permanent --load-ipset-defaults=ipset Load ipset default settings or report NO_DEFAULTS error. [--permanent] --info-ipset=ipset Print information about the ipset ipset. The output format is: ipset type: type options: option1[=value1] .. entries: entry1 .. [--permanent] --get-ipsets Print predefined ipsets as a space separated list. --permanent --ipset=ipset --set-description=description Set new description to ipset --permanent --ipset=ipset --get-description Print description for ipset --permanent --ipset=ipset --set-short=description Set short description to ipset --permanent --ipset=ipset --get-short Print short description for ipset [--permanent] --ipset=ipset --add-entry=entry Add a new entry to the ipset. [--permanent] --ipset=ipset --remove-entry=entry Remove an entry from the ipset. [--permanent] --ipset=ipset --query-entry=entry Return whether the entry has been added to an ipset. Returns 0 if true, 1 otherwise. [--permanent] --ipset=ipset --get-entries List all entries of the ipset. [--permanent] --ipset=ipset --add-entries-from-file=filename Add a new entries to the ipset from the file. For all entries that are listed in the file but already in the ipset, a warning will be printed. The file should contain an entry per line. Lines starting with an hash or semicolon are ignored. Also empty lines. [--permanent] --ipset=ipset --remove-entries-from-file=filename Remove existing entries from the ipset from the file. For all entries that are listed in the file but not in the ipset, a warning will be printed. The file should contain an entry per line. Lines starting with an hash or semicolon are ignored. Also empty lines. Service Options Options in this section affect only one particular service. [--permanent] --info-service=service Print information about the service service. The output format is: service ports: port1 .. protocols: protocol1 .. source-ports: source-port1 .. modules: module1 .. destination: ipv1:address1 .. The following options are only usable in the permanent configuration. --permanent --new-service=service Add a new permanent and empty service. --permanent --new-service-from-file=filename [--name=service] Add a new permanent service from a prepared service file with an optional name override. --permanent --delete-service=service Delete an existing permanent service. --permanent --load-service-defaults=service Load service default settings or report NO_DEFAULTS error. --permanent --service=service --set-description=description Set new description to service --permanent --service=service --get-description Print description for service --permanent --service=service --set-short=description Set short description to service --permanent --service=service --get-short Print short description for service --permanent --service=service --add-port=portid[-portid]/protocol Add a new port to the permanent service. --permanent --service=service --remove-port=portid[-portid]/protocol Remove a port from the permanent service. --permanent --service=service --query-port=portid[-portid]/protocol Return wether the port has been added to the permanent service. --permanent --service=service --get-ports List ports added to the permanent service. --permanent --service=service --add-protocol=protocol Add a new protocol to the permanent service. --permanent --service=service --remove-protocol=protocol Remove a protocol from the permanent service. --permanent --service=service --query-protocol=protocol Return wether the protocol has been added to the permanent service. --permanent --service=service --get-protocols List protocols added to the permanent service. --permanent --service=service --add-source-port=portid[-portid]/protocol Add a new source port to the permanent service. --permanent --service=service --remove-source-port=portid[-portid]/protocol Remove a source port from the permanent service. --permanent --service=service --query-source-port=portid[-portid]/protocol Return wether the source port has been added to the permanent service. --permanent --service=service --get-source-ports List source ports added to the permanent service. --permanent --service=service --add-module=module Add a new module to the permanent service. --permanent --service=service --remove-module=module Remove a module from the permanent service. --permanent --service=service --query-module=module Return wether the module has been added to the permanent service. --permanent --service=service --get-modules List modules added to the permanent service. --permanent --service=service --set-destination=ipv:address[/mask] Set destination for ipv to address[/mask] in the permanent service. --permanent --service=service --remove-destination=ipv Remove the destination for ipv from the permanent service. --permanent --service=service --query-destination=ipv:address[/mask] Return wether the destination ipv to address[/mask] has been set in the permanent service. --permanent --service=service --get-destinations List destinations added to the permanent service. Internet Control Message Protocol (ICMP) type Options Options in this section affect only one particular icmptype. [--permanent] --info-icmptype=icmptype Print information about the icmptype icmptype. The output format is: icmptype destination: ipv1 .. The following options are only usable in the permanent configuration. --permanent --new-icmptype=icmptype Add a new permanent and empty icmptype. --permanent --new-icmptype-from-file=filename [--name=icmptype] Add a new permanent icmptype from a prepared icmptype file with an optional name override. --permanent --delete-icmptype=icmptype Delete an existing permanent icmptype. --permanent --load-icmptype-defaults=icmptype Load icmptype default settings or report NO_DEFAULTS error. --permanent --icmptype=icmptype --set-description=description Set new description to icmptype --permanent --icmptype=icmptype --get-description Print description for icmptype --permanent --icmptype=icmptype --set-short=description Set short description to icmptype --permanent --icmptype=icmptype --get-short Print short description for icmptype --permanent --icmptype=icmptype --add-destination=ipv Enable destination for ipv in permanent icmptype. ipv is one of ipv4 or ipv6. --permanent --icmptype=icmptype --remove-destination=ipv Disable destination for ipv in permanent icmptype. ipv is one of ipv4 or ipv6. --permanent --icmptype=icmptype --query-destination=ipv Return whether destination for ipv is enabled in permanent icmptype. ipv is one of ipv4 or ipv6. --permanent --icmptype=icmptype --get-destinations List destinations in permanent icmptype. Direct Options The direct options give a more direct access to the firewall. These options require user to know basic iptables concepts, i.e. table (filter/mangle/nat/...), chain (INPUT/OUTPUT/FORWARD/...), commands (-A/-D/-I/...), parameters (-p/-s/-d/-j/...) and targets (ACCEPT/DROP/REJECT/...). Direct options should be used only as a last resort when it's not possible to use for example --add-service=service or --add-rich-rule='rule'. The first argument of each option has to be ipv4 or ipv6 or eb. With ipv4 it will be for IPv4 (iptables(8)), with ipv6 for IPv6 (ip6tables(8)) and with eb for ethernet bridges (ebtables(8)). [--permanent] --direct --get-all-chains Get all chains added to all tables. This option concerns only chains previously added with --direct --add-chain. [--permanent] --direct --get-chains { ipv4 | ipv6 | eb } table Get all chains added to table table as a space separated list. This option concerns only chains previously added with --direct --add-chain. [--permanent] --direct --add-chain { ipv4 | ipv6 | eb } table chain Add a new chain with name chain to table table. Make sure there's no other chain with this name already. There already exist basic chains to use with direct options, for example INPUT_direct chain (see iptables-save | grep direct output for all of them). These chains are jumped into before chains for zones, i.e. every rule put into INPUT_direct will be checked before rules in zones. [--permanent] --direct --remove-chain { ipv4 | ipv6 | eb } table chain Remove chain with name chain from table table. Only chains previously added with --direct --add-chain can be removed this way. [--permanent] --direct --query-chain { ipv4 | ipv6 | eb } table chain Return whether a chain with name chain exists in table table. Returns 0 if true, 1 otherwise. This option concerns only chains previously added with --direct --add-chain. [--permanent] --direct --get-all-rules Get all rules added to all chains in all tables as a newline separated list of the priority and arguments. This option concerns only rules previously added with --direct --add-rule. [--permanent] --direct --get-rules { ipv4 | ipv6 | eb } table chain Get all rules added to chain chain in table table as a newline separated list of the priority and arguments. This option concerns only rules previously added with --direct --add-rule. [--permanent] --direct --add-rule { ipv4 | ipv6 | eb } table chain priority args Add a rule with the arguments args to chain chain in table table with priority priority. The priority is used to order rules. Priority 0 means add rule on top of the chain, with a higher priority the rule will be added further down. Rules with the same priority are on the same level and the order of these rules is not fixed and may change. If you want to make sure that a rule will be added after another one, use a low priority for the first and a higher for the following. [--permanent] --direct --remove-rule { ipv4 | ipv6 | eb } table chain priority args Remove a rule with priority and the arguments args from chain chain in table table. Only rules previously added with --direct --add-rule can be removed this way. [--permanent] --direct --remove-rules { ipv4 | ipv6 | eb } table chain Remove all rules in the chain with name chain exists in table table. This option concerns only rules previously added with --direct --add-rule in this chain. [--permanent] --direct --query-rule { ipv4 | ipv6 | eb } table chain priority args Return whether a rule with priority and the arguments args exists in chain chain in table table. Returns 0 if true, 1 otherwise. This option concerns only rules previously added with --direct --add-rule. --direct --passthrough { ipv4 | ipv6 | eb } args Pass a command through to the firewall. args can be all iptables, ip6tables and ebtables command line arguments. This command is untracked, which means that firewalld is not able to provide information about this command later on, also not a listing of the untracked passthoughs. [--permanent] --direct --get-all-passthroughs Get all passthrough rules as a newline separated list of the ipv value and arguments. [--permanent] --direct --get-passthroughs { ipv4 | ipv6 | eb } Get all passthrough rules for the ipv value as a newline separated list of the priority and arguments. [--permanent] --direct --add-passthrough { ipv4 | ipv6 | eb } args Add a passthrough rule with the arguments args for the ipv value. [--permanent] --direct --remove-passthrough { ipv4 | ipv6 | eb } args Remove a passthrough rule with the arguments args for the ipv value. [--permanent] --direct --query-passthrough { ipv4 | ipv6 | eb } args Return whether a passthrough rule with the arguments args exists for the ipv value. Returns 0 if true, 1 otherwise. Lockdown Options Local applications or services are able to change the firewall configuration if they are running as root (example: libvirt) or are authenticated using PolicyKit. With this feature administrators can lock the firewall configuration so that only applications on lockdown whitelist are able to request firewall changes. The lockdown access check limits D-Bus methods that are changing firewall rules. Query, list and get methods are not limited. The lockdown feature is a very light version of user and application policies for firewalld and is turned off by default. --lockdown-on Enable lockdown. Be careful - if firewall-cmd is not on lockdown whitelist when you enable lockdown you won't be able to disable it again with firewall-cmd, you would need to edit firewalld.conf. This is a runtime and permanent change. --lockdown-off Disable lockdown. This is a runtime and permanent change. --query-lockdown Query whether lockdown is enabled. Returns 0 if lockdown is enabled, 1 otherwise. Lockdown Whitelist Options The lockdown whitelist can contain commands, contexts, users and user ids. If a command entry on the whitelist ends with an asterisk '*', then all command lines starting with the command will match. If the '*' is not there the absolute command inclusive arguments must match. Commands for user root and others is not always the same. Example: As root /bin/firewall-cmd is used, as a normal user /usr/bin/firewall-cmd is be used on Fedora. The context is the security (SELinux) context of a running application or service. To get the context of a running application use ps -e --context. Warning: If the context is unconfined, then this will open access for more than the desired application. The lockdown whitelist entries are checked in the following order: 1. context 2. uid 3. user 4. command [--permanent] --list-lockdown-whitelist-commands List all command lines that are on the whitelist. [--permanent] --add-lockdown-whitelist-command=command Add the command to the whitelist. [--permanent] --remove-lockdown-whitelist-command=command Remove the command from the whitelist. [--permanent] --query-lockdown-whitelist-command=command Query whether the command is on the whitelist. Returns 0 if true, 1 otherwise. [--permanent] --list-lockdown-whitelist-contexts List all contexts that are on the whitelist. [--permanent] --add-lockdown-whitelist-context=context Add the context context to the whitelist. [--permanent] --remove-lockdown-whitelist-context=context Remove the context from the whitelist. [--permanent] --query-lockdown-whitelist-context=context Query whether the context is on the whitelist. Returns 0 if true, 1 otherwise. [--permanent] --list-lockdown-whitelist-uids List all user ids that are on the whitelist. [--permanent] --add-lockdown-whitelist-uid=uid Add the user id uid to the whitelist. [--permanent] --remove-lockdown-whitelist-uid=uid Remove the user id uid from the whitelist. [--permanent] --query-lockdown-whitelist-uid=uid Query whether the user id uid is on the whitelist. Returns 0 if true, 1 otherwise. [--permanent] --list-lockdown-whitelist-users List all user names that are on the whitelist. [--permanent] --add-lockdown-whitelist-user=user Add the user name user to the whitelist. [--permanent] --remove-lockdown-whitelist-user=user Remove the user name user from the whitelist. [--permanent] --query-lockdown-whitelist-user=user Query whether the user name user is on the whitelist. Returns 0 if true, 1 otherwise. Panic Options --panic-on Enable panic mode. All incoming and outgoing packets are dropped, active connections will expire. Enable this only if there are serious problems with your network environment. For example if the machine is getting hacked in. This is a runtime only change. --panic-off Disable panic mode. After disabling panic mode established connections might work again, if panic mode was enabled for a short period of time. This is a runtime only change. --query-panic Returns 0 if panic mode is enabled, 1 otherwise. EXAMPLES For more examples see http://fedoraproject.org/wiki/FirewallD Example 1 Enable http service in default zone. This is runtime only change, i.e. effective until restart. firewall-cmd --add-service=http Example 2 Enable port 443/tcp immediately and permanently in default zone. To make the change effective immediately and also after restart we need two commands. The first command makes the change in runtime configuration, i.e. makes it effective immediately, until restart. The second command makes the change in permanent configuration, i.e. makes it effective after restart. firewall-cmd --add-port=443/tcp firewall-cmd --permanent --add-port=443/tcp EXIT CODES On success 0 is returned. On failure the output is red colored and exit code is either 2 in case of wrong command-line option usage or one of the following error codes in other cases: ┌────────────────────┬──────┐ │String │ Code │ ├────────────────────┼──────┤ │ALREADY_ENABLED │ 11 │ ├────────────────────┼──────┤ │NOT_ENABLED │ 12 │ ├────────────────────┼──────┤ │COMMAND_FAILED │ 13 │ ├────────────────────┼──────┤ │NO_IPV6_NAT │ 14 │ ├────────────────────┼──────┤ │PANIC_MODE │ 15 │ ├────────────────────┼──────┤ │ZONE_ALREADY_SET │ 16 │ ├────────────────────┼──────┤ │UNKNOWN_INTERFACE │ 17 │ ├────────────────────┼──────┤ │ZONE_CONFLICT │ 18 │ ├────────────────────┼──────┤ │BUILTIN_CHAIN │ 19 │ ├────────────────────┼──────┤ │EBTABLES_NO_REJECT │ 20 │ ├────────────────────┼──────┤ │NOT_OVERLOADABLE │ 21 │ ├────────────────────┼──────┤ │NO_DEFAULTS │ 22 │ ├────────────────────┼──────┤ │BUILTIN_ZONE │ 23 │ ├────────────────────┼──────┤ │BUILTIN_SERVICE │ 24 │ ├────────────────────┼──────┤ │BUILTIN_ICMPTYPE │ 25 │ ├────────────────────┼──────┤ │NAME_CONFLICT │ 26 │ ├────────────────────┼──────┤ │NAME_MISMATCH │ 27 │ ├────────────────────┼──────┤ │PARSE_ERROR │ 28 │ ├────────────────────┼──────┤ │ACCESS_DENIED │ 29 │ ├────────────────────┼──────┤ │UNKNOWN_SOURCE │ 30 │ ├────────────────────┼──────┤ │RT_TO_PERM_FAILED │ 31 │ ├────────────────────┼──────┤ │IPSET_WITH_TIMEOUT │ 32 │ ├────────────────────┼──────┤ │BUILTIN_IPSET │ 33 │ ├────────────────────┼──────┤ │ALREADY_SET │ 34 │ ├────────────────────┼──────┤ │MISSING_IMPORT │ 35 │ ├────────────────────┼──────┤ │DBUS_ERROR │ 36 │ ├────────────────────┼──────┤ │INVALID_ACTION │ 100 │ ├────────────────────┼──────┤ │INVALID_SERVICE │ 101 │ ├────────────────────┼──────┤ │INVALID_PORT │ 102 │ ├────────────────────┼──────┤ │INVALID_PROTOCOL │ 103 │ ├────────────────────┼──────┤ │INVALID_INTERFACE │ 104 │ ├────────────────────┼──────┤ │INVALID_ADDR │ 105 │ ├────────────────────┼──────┤ │INVALID_FORWARD │ 106 │ ├────────────────────┼──────┤ │INVALID_ICMPTYPE │ 107 │ ├────────────────────┼──────┤ │INVALID_TABLE │ 108 │ ├────────────────────┼──────┤ │INVALID_CHAIN │ 109 │ ├────────────────────┼──────┤ │INVALID_TARGET │ 110 │ ├────────────────────┼──────┤ │INVALID_IPV │ 111 │ ├────────────────────┼──────┤ │INVALID_ZONE │ 112 │ ├────────────────────┼──────┤ │INVALID_PROPERTY │ 113 │ ├────────────────────┼──────┤ │INVALID_VALUE │ 114 │ ├────────────────────┼──────┤ │INVALID_OBJECT │ 115 │ ├────────────────────┼──────┤ │INVALID_NAME │ 116 │ ├────────────────────┼──────┤ │INVALID_FILENAME │ 117 │ ├────────────────────┼──────┤ │INVALID_DIRECTORY │ 118 │ ├────────────────────┼──────┤ │INVALID_TYPE │ 119 │ ├────────────────────┼──────┤ │INVALID_SETTING │ 120 │ ├────────────────────┼──────┤ │INVALID_DESTINATION │ 121 │ ├────────────────────┼──────┤ │INVALID_RULE │ 122 │ ├────────────────────┼──────┤ │INVALID_LIMIT │ 123 │ ├────────────────────┼──────┤ │INVALID_FAMILY │ 124 │ ├────────────────────┼──────┤ │INVALID_LOG_LEVEL │ 125 │ ├────────────────────┼──────┤ │INVALID_AUDIT_TYPE │ 126 │ ├────────────────────┼──────┤ │INVALID_MARK │ 127 │ ├────────────────────┼──────┤ │INVALID_CONTEXT │ 128 │ ├────────────────────┼──────┤ │INVALID_COMMAND │ 129 │ ├────────────────────┼──────┤ │INVALID_USER │ 130 │ ├────────────────────┼──────┤ │INVALID_UID │ 131 │ ├────────────────────┼──────┤ │INVALID_MODULE │ 132 │ ├────────────────────┼──────┤ │INVALID_PASSTHROUGH │ 133 │ ├────────────────────┼──────┤ │INVALID_MAC │ 134 │ ├────────────────────┼──────┤ │INVALID_IPSET │ 135 │ ├────────────────────┼──────┤ │INVALID_ENTRY │ 136 │ ├────────────────────┼──────┤ │INVALID_OPTION │ 137 │ ├────────────────────┼──────┤ │MISSING_TABLE │ 200 │ ├────────────────────┼──────┤ │MISSING_CHAIN │ 201 │ ├────────────────────┼──────┤ │MISSING_PORT │ 202 │ ├────────────────────┼──────┤ │MISSING_PROTOCOL │ 203 │ ├────────────────────┼──────┤ │MISSING_ADDR │ 204 │ ├────────────────────┼──────┤ │MISSING_NAME │ 205 │ ├────────────────────┼──────┤ │MISSING_SETTING │ 206 │ ├────────────────────┼──────┤ │MISSING_FAMILY │ 207 │ ├────────────────────┼──────┤ │NOT_RUNNING │ 252 │ ├────────────────────┼──────┤ │NOT_AUTHORIZED │ 253 │ ├────────────────────┼──────┤ │UNKNOWN_ERROR │ 254 │ └────────────────────┴──────┘ SEE ALSO firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.dbus(5), firewalld.icmptype(5), firewalld.lockdown-whitelist(5), firewall-offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5), firewalld.zones(5) NOTES firewalld home page: http://www.firewalld.org More documentation with examples: http://fedoraproject.org/wiki/FirewallD AUTHORS Thomas Woerner <[email protected]> Developer Jiri Popelka <[email protected]> Developer firewalld 0.4.3.2 FIREWALL-CMD(1)
© Lightnetics 2024