hpvmclone — Create a new virtual machine that is a copy of an existing virtual machine.
-
NAME hpvmclone — Create a new virtual machine that is a copy of an existing virtual machine. SYNOPSIS hpvmclone { -P vm_name -p vm_number } -N clone_VM_name [ -F | -s ] [-l vm_label] [-B start_attr] [-O os_type [:version]] [-c number_vcpus] [ -e percent[:max_percent] -E cycles[:max_cycles] ] [-r amount] [-S] [-g -group] [-g [+]group[: {admin|oper}]] [-u -user] [-u [+]user[: {admin|oper}]] [-a rsrc]... [-m rsrc]... [-d rsrc]... [-b rsrc] [[-x name=value [:name=value]]] DESCRIPTION The hpvmclone command creates a copy of an existing virtual machine and its configuration information. This command copies the configuration files of the existing guest. It does not copy the actual data and software associated with the guest. The clone_vm_name must not already exist on this host. The new virtual machine's configuration information can be modified from the original configuration file by using command options. If no options are specified, all original parameters are retained. Note that resource conflicts could occur if both the original and clone virtual machines are booted together. Resources are checked to determine whether the virtual machine can boot by itself on the server. Any problems are reported as WARNINGS. These warnings do not prevent the new virtual machine from being created. Only superusers can execute the hpvmclone command. Options To print the warnings without creating a new virtual machine, use the -s option. Because there is no guarantee that other virtual machines are running at the same time as the new virtual machine is running, use the following command to verify whether a device has dependents: hpvmdevmgmt -l gdev:entry_name where entry_name is the device name in the device-management database. If you omit an option, the associated attribute remains unchanged. -P vm_name Specifies the name of the existing virtual machine to be cloned. You must specify either the -P or the -p option. -p vm_number Specifies the number of the existing virtual machine to be cloned. You can obtain the value of vm_number using the hpvmstatus command. You must specify either the -P or the -p option. -N clone_vm_name Specifies the name to be assigned to the new virtual machine. The name can be composed of up to 256 alphanumeric characters, including A-Z, a-z, 0-9, the dash (—), the underscore (_), and the period (.). The virtual machine name cannot start with a dash (—). You must specify the -N option. -e percent[:max_percent] Specifies the percentage of CPU resources to which each of the new guest's virtual CPUs is entitled. If the entitlement is not specified with this option or the -E option, the new virtual machine's entitlement is that of the existing virtual machine. The percentage can be set to an integral value between 0 and 100. If the value specified is less than 5, then the virtual machine is allocated the minimum percentage of 5%. The default is 10%. The maximum entitlement cannot exceed 100 percent and cannot be less than the minimum. Each group has a default maximum setting of 100 percent. The entitled CPU resources inherited from the existing virtual machine, specified in cycles or percentages, are replaced in the new virtual machine by this percentage. The -e and the -E options are mutually exclusive. -E cycles[:max_cycles] Specifies the virtual machine's CPU entitlement in number of CPU clock cycles. If the cycles are not specified with this option and the -e option is not specified, the new virtual machine's entitled CPU resources is that of the existing virtual machine. The cycles are expressed as an integer, followed by one of these units: M (megahertz) G (gigahertz) If no letter is specified, the default unit is megahertz. The value of entitlement inherited from the existing virtual machine (specified in either cycles or percentages) is replaced in the new virtual machine by the new value in CPU clock cycles. The -e and the -E options are mutually exclusive. -l vm_label Specifies a descriptive text string for the new virtual machine. This option can be useful in identifying a specific virtual machine in the hpvmstatus -V display. The label can be up to 256 alphanumeric characters, including A-Z, a-z, 0-9, the dash (—), the underscore (_), and the period (.). To specify white space, the label must be quoted (" "). -B start_attr Specifies the startup behavior of the virtual machine. The start_attr attribute can have the following (case-insensitive) values: auto: Automatically start the virtual machine when Integrity VM is initialized on the host. manual: Manually start the virtual machine. (This is the default.) If the start_attr attribute is set to auto, the virtual machine starts when Integrity VM is initialized. This occurs when the VM Host system is booted, and when the Integrity VM software is stopped and restarted on a running VM Host. For example, when you upgrade Integrity VM to a new version on a running system, the software is started automatically. The VM Host attempts to start all virtual machines for which the attribute is set to auto. If insufficient resources exist, some virtual machines might fail to start. If the attribute is set to manual, the virtual machine does not start automatically when Integrity VM is initialized on the VM Host. This is the default. The virtual machine can then be started manually with the hpvmstart command or through its virtual console. This option does not set the virtual machine's console to enable booting when the virtual machine is started. This function must be set with the virtual machine's console. -O os_type[:version] Specifies the type and version of the operating system running on the virtual machine. The response affects the default selection of certain virtual machine attributes, such as amount of memory and CPU power. The os_type is one of the following: HP-UX, WINDOWS, or LINUX. This parameter is not case sensitive. The version is specific to the operating system type. The version specifies a descriptive text string of the version of the operating system. The version string can consist of up to 256 alphanumeric characters, including A-Z, a-z, 0-9, the dash (—), the underscore r (_), and the period (.). To specify white space, then “version” must be quoted. -a rsrc Adds an I/O resource to the new virtual machine. The resource specification (rsrc) is described in hpvmresources(5). This option can be specified more than once. -d rsrc Deletes an I/O resource from the new virtual machine. The resource specification (rsrc) is described in hpvmresources(5). This option can be specified more than once. -m rsrc Modifies an I/O resource on the cloned virtual machine. This option can be specified more than once. Integrity VM recognizes the following types of guest virtual devices: Virtual disks, which can be backed by files in a VM Host file system, by logical volumes or by whole disks. Virtual DVDs, which can be backed by files in a VM Host file system or by the physical DVD drive. Virtual network switches (vswitches), which are created using the hpvmnet command and backed by physical LAN cards. For more information about vswitches, see the hpvmnet manpage. For information about specifying storage and network resources for guests, see hpvmresources(5). -b rsrc Specifies the boot device for the cloned virtual machine. To specify the rsrc parameter to the -b, option, you must specify the virtual device hardware address. The virtual device hardware address specifies the address of the boot disk being cloned from. The physical device specifies the boot disk being cloned to. For more information about specifying storage and network resources for guests, see hpvmresources(5). -F Ignores all virtual machine configuration warnings, including oversubscribing of resources (Force mode). This option is primarily intended for use by scripts and other noninteractive applications. -c number_vcpus Specifies the number of virtual CPUs visible to the new virtual machine. If unspecified, the number defaults to that of the existing virtual machine. -r amount Specifies the amount of memory available to the new virtual machine at boot time. The sizes are expressed as integers, optionally followed by one of these units: M (megabytes) G (gigabytes) If the letter is left off, the unit type defaults to megabytes. If the -r option is omitted, the amount of memory is that of the existing virtual machine. -S Specifies that the cloned guest must share the same virtual LAN (VLAN) ports as the source guest. By default, the hpvmclone command allocates VLAN ports that are different from those allocated to the guest that is the source of the clone operation. -g [+]group:{ admin| oper} Specifies group authorization. Use the -g [+]group:{admin | oper}syntax to add a group, where + is optional. When adding a group authorization, the default authorization type is oper. To remove a group authorization, specify the -g -group syntax. This option can be specified more than once. -u [+]username:{admin | oper} Specifies user authorization. Remove user authorization by using the -u user syntax. The virtual machine user account specified here can use the hpvmconsole command to manage the virtual machine. Add user authorization using the -u [+]user:{admin |oper } syntax, where + is optional. When adding a group authorization, the default authorization type is oper. -s Verifies the new virtual machine configuration and returns warnings or errors but does not create the virtual machine. -x Specifies whether the new virtual machine uses dynamic memory and the values associated with it by including the following keywords: -x dynamic_memory_control={0|1} -x ram_dyn_type={none|any|driver} -x ram_dyn_min=amount -x ram_dyn_max=amount -x ram_dyn_target_start=amount -x mac_address={new|same} -x serial_number={new|same} -x sched_preference={none|cell|ilm} where: none — The default preference. If your application is predominantly CPU bound, specifying either ilm or cell will perform the same. cell — The cell with the most CPU and memory space is chosen. When that guest is active, the scheduler then optimizes where the guest runs, so that it can be closest to its memory. ilm — Indicates that guests that are larger than any single cell and contain highly threaded applications. To specify the MAC address of the new virtual machine, enter the following: -x mac_address={new|same} To specify the serial number of the new virtual machine, enter the following: -x serial_number={new|same} RETURN VALUES The hpvmclone command exits with one of the following values: 0: Successful completion. 1: One or more error conditions occurred. DIAGNOSTICS The hpvmclone command displays error messages on stderr for any of the following conditions: An invalid option is specified. An invalid value is specified for an option. A value was omitted for an argument that requires one, or a value was supplied for an argument that does not take one. One or more options other than -a, -m, -d, -g, or -u have been specified more than once. The clone_vm_name attribute already exists. The vm_name or vm_number attribute does not exist, cannot be accessed, is not a virtual machine, or is corrupt. The hpvmclone command and Integrity VM are at different revision levels. The same resource was allocated more than once. A resource allocated to another virtual machine was specified, and the force flag (-F) was not used. EXAMPLES Clone the virtual machine named compass2, to create a new virtual machine named compass5. # hpvmclone -P compass2 -N compass5 Following are sample warning messages returned when hpvmclone is executed with various configuration problems on the guest compass5: HPVM guest compass5 configuration problems: Warning 1: Guest needs more vcpus than server supports. Warning 2: Insufficient free memory for guest. Warning 3: Insufficient swap resource for guest. Warning 4: Insufficient cpu resource for guest. Warning 5 on item /dev/rdisk/disk0: Device file '/dev/rdsk/disk0' in use by another guest. Warning 6 on item /dev/vg00/rswap: Device file '/dev/vg00/rswap' in use by server. Warning 7 on item /dev/rdisk/disk3 backing device does not exist. Warning 8 on item /dev/rdisk/disk4: Device file '/dev/rdisk/disk4' in use by another guest. Warning 9 on item hostnet: MAC address in use for switch hostnet. Warning 10 on item offnet: Vswitch offnet is not active. Warning 11 on item badnet: 'badnet' backing device does not exist. These problems will prevent HPVM guest compass5 from booting. The following example shows how to use the hpvmclone command to create a guest named vmclone1 that uses the same ports as the existing guest (vm1). The hpvmnet command shows that two guests are sharing ports 1 and 2 on the virtual switch vmlan4. Only the active virtual machine (vm1) can use the port. # hpvmclone -P vm1 -N vmclone1 -S # hpvmnet -S vmlan4 Name Number State Mode PPA MAC Address IP Address ======== ====== ======= ========= ====== ============== =============== vmlan4 2 Up Shared lan4 0x00127942fce3 192.1.2.205 [Port Configuration Details] Port Port Port Untagged Number of Active VM Number state Adaptor VLANID Reserved VMs ======= ============ ======== ============ ============ 1 Active lan none 2 vm1 2 Active lan 100 2 vm1 3 Active avio_lan none 1 vm2 4 Active lan 100 1 vm2 The following example shows how to use the hpvmclone command to create a new Linux guest named linux2 based on the existing guest named linux1. The boot disk is specified. # hpvmclone -P linux1 -N linux2 -b disk:scsi::0,0,0:disk: Be sure that the backing devices are the same, The copy of data succeeds but the new virtual machine fails to boot if the backing devices are different. For example, if the source virtual machine boots from an lvol, and you boot the cloned virtual machine from a disk, it fails. AUTHORS The hpvmclone command was developed by HP. SEE ALSO On the VM Host: hpvm(5), hpvmcollect(1M), hpvmconsole(1M), hpvmcreate(1M), hpvmdevmgmt(1M), hpvmdevtranslate(1M), hpvmhostrdev(1M), hpvminfo(1M), hpvmmigrate(1M), hpvmmodify(1M), hpvmnet(1M), hpvmpubapi(3), hpvmremove(1M), hpvmresources(5), hpvmsar(1M), hpvmstart(1M), hpvmstatus(1M), hpvmstop(1M), hpvmupgrade(1M), p2vassist(1M) On the Integrity VM guest: hpvmcollect(1M), hpvminfo(1M), hpvmmgmt(1M), hpvmpubapi(3)
© Lightnetics 2024