Github News

• 

  5 tips to supercharge your developer career in 2024
  • sorangutan  

  1
  1
  Posts
  9
  Views

  

  The world of software development is constantly evolving. That means whether you’re a seasoned developer or just starting out on your coding journey, there’s always something new to learn.

  Below, we’ll explore five actionable tips to take your career to the next level. From mastering prompt engineering to harnessing the power of AI for code security, these tips will help you learn the skills and uncover the knowledge you need to excel in today’s competitive job market.

  Tip #1: Become a pro at prompt engineering

  In the age of AI, you can use AI tools like GitHub Copilot to code up to 55% faster. But like any other tool or skill, our AI pair programmer has a learning curve, and there are certain techniques you can use that will make your work with AI even more effective. Enter prompt engineering. With prompt engineering, you provide GitHub Copilot with more context about your project—which yields better, more accurate results. Below are three best practices for crafting prompts for GitHub Copilot:

  Open related files in VS Code while using GitHub Copilot

  While you can begin using GitHub Copilot with a blank file, one easy way to introduce more context is to open related files in VS Code. Known as neighboring tabs, this technique enables Copilot to gain a deeper understanding of your code by processing all open files in your IDE.

  This broader scope allows Copilot to identify matching code segments across your project, enhancing its suggestions and code completion capabilities.

  Provide a top-level comment in your code file

  Imagine being assigned a task with little to no context—that would make accomplishing it much more difficult, right? The same can be said for GitHub Copilot. When you add a brief, top-level comment in your code file, it helps Copilot understand the overarching objective before getting into the how.

  Once you’ve broken down the ask and your goal, you can articulate the logic and steps required to achieve it. Then, allow Copilot to generate code incrementally, rather than all at once. This approach enhances Copilot’s understanding and improves the quality of the generated code.

  Input sample code

  Offer GitHub Copilot a snippet of code that closely resembles what you need. Even a brief example can further help Copilot craft suggestions tailored to your language and objectives!

  Tip #2: Learn shortcuts and hacks

  GitHub is full of shortcuts and hacks that make your work life easier and help you stay in the flow. Gain momentum in your projects and increase your productivity with these popular shortcuts:

  Search for any file in your repositories

  When you’re searching through repositories, type the letter “t” on your keyboard to activate the file finder and do away with hours of wasted time! See how in the video below:

  Link your pull requests to your issues

  Did you know that GitHub also has project management tools? One of them is a handy interlinking feature that allows you to link pull requests and Git commits to relevant issues in a project. This facilitates better organization, collaboration, and project management, not just for you, but for anyone looking for more context in your issue. Gone are the days of hunting down old issues every time you create a new pull request!

  Create custom actions

  Creating custom actions on GitHub enables you to enhance code reuse, bypass repetition, and simplify maintenance across multiple workflows. All you have to do is outline the necessary steps for a particular task and package them into an action using any supported programming or scripting language, and you’re all set!

  Incorporate feedback in pull requests

  Ever wish there was an easier way to review code? Well, it’s possible! Add comments directly to the pull request, propose changes, and even accept and add those suggestions seamlessly to make code reviews easier than ever. You can also save your replies by heading over to the comment box in an open pull request and selecting “create new saved reply,” and then “add saved reply,” to make it official.

  Tip #3: Brush up on your soft skills

  AI has introduced a host of hard skills that developers need to master in order to keep up with the latest tooling. Soft skills complement your new technical expertise and can contribute to your overall success by enhancing communication, collaboration, and problem-solving. Here are a few important ones to practice:

  Communication

  As you know, developer work rarely happens in a vacuum. Strong communication skills can facilitate clear understanding and efficient collaboration for both humans and AI tools, whether you’re collaborating with stakeholders, communicating complex technical concepts to non-technical audiences, or working on your prompt engineering.

  Problem-solving

  Critical thinking enables developers to approach complex challenges creatively, break them down into manageable tasks, and find innovative solutions with the help of AI coding tools.

  Adaptability

  AI coding tools are evolving rapidly, with new technologies, methodologies, and tools emerging regularly. Being adaptable allows developers to stay current, learn new skills quickly, and stay nimble as things change. To cultivate resilience and embrace discomfort (in and outside of the workplace), engage in activities that challenge you to anticipate and respond to the unexpected.

  Ethics

  Being aware of the ethical implications associated with these tools is essential. Developers should understand both the capabilities and limitations of AI coding tools and exercise critical thinking when interpreting responses from them. By remaining conscious of ethical considerations and actively working toward ethical practices, developers can ensure that these tools are used responsibly.

  Empathy

  Empathy is crucial for understanding the needs, preferences, and challenges of end-users. Empathy also fosters better collaboration within teams by promoting understanding and respect for colleagues’ perspectives and experiences.

  Tip #4: Use AI to secure your code

  Developers can leverage AI to enhance code security in several ways. First, AI can help prevent vulnerabilities by providing context and secure code suggestions right from the start. Traditionally, “shift left” meant getting security feedback after coding (but before deployment). By utilizing AI as a pair programmer, developers can “shift left” by addressing security concerns right where they bring their ideas to code.

  A common pain point for developers is sifting through lengthy pages of alerts, many of which turn out to be false positives—wasting valuable time and resources. With features like code scanning autofix, AI and automation can step in to provide AI-generated code fixes alongside vulnerability alerts, streamlining remediation directly into the developer workflow. Similarly, secret scanning alerts developers to potential secrets detected in the code.

  AI also presents an opportunity to improve the modeling of a vast array of open-source frameworks and libraries. Traditionally, security teams manually model numerous packages and APIs. This is a challenging task given the volume and diversity of these components, along with frequent updates and replacements. By infusing AI in modeling efforts, developers can increase the detection of vulnerabilities.

  Tip #5: Attend GitHub Universe 2024

  Attending conferences is a valuable investment in a developer’s career, providing opportunities for learning, networking, skill development, and professional growth all at the same time. GitHub Universe is our flagship, global event that brings together developers, leaders, and companies for two days of exploring the latest technologies and industry trends with fun, food, and networking in between. Here are some of the highlights:

  100+ sessions on AI, DevEx, and security

  Learn about frameworks and best practices directly from 150+ experts in the field through keynotes, breakout sessions, product demos, and more.

  Gain and practice new skills

  Git official by signing up for an interactive workshop or getting GitHub certified in GitHub Actions, GitHub Advanced Security, GitHub Foundations, or GitHub Administration. It’ll certainly look great on your resume and LinkedIn. 😉

  Visibility

  Sharing insights, presenting research findings, or showcasing projects can help developers establish themselves as thought leaders and experts in their field. The Universe call for sessions is open from now until May 10. Submit a session proposal today!

  Professional development

  Show your commitment to your career and continuous learning by visiting the dedicated Career Corner for professional development.

  Community engagement

  Build your network and find opportunities for collaboration and mentorship by engaging with peers and participating in the Discussions Lounge.

  Learn more about our content tracks and what we have in store for the 10th anniversary of our global developer event.

  Navigate your career with confidence

  By implementing the strategies outlined above, you’ll be well-equipped to unlock your dream career in 2024 and beyond. And remember: you can take your skills to the next level, network with industry leaders, and learn how to use the latest AI tools at GitHub Universe 2024.

  Eager to get involved? Act fast to save 30% on in-person tickets with our Super Early Bird discount from now until July 8, or get notified about our free virtual event!

  The post 5 tips to supercharge your developer career in 2024 appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-05-01-5-tips-to-supercharge-your-developer-career-in-2024/
• 

  GitHub Availability Report: March 2024
  • sorangutan  

  1
  1
  Posts
  20
  Views

  

  In March, we experienced two incidents that resulted in degraded performance across GitHub services.

  March 15 19:42 UTC (lasting 42 minutes)

  On March 15, GitHub experienced service degradation from 19:42 to 20:24 UTC due to a regression in the permissions system. This regression caused failures in GitHub Codespaces, GitHub Actions, and GitHub Pages. The problem stemmed from a framework upgrade that introduced MySQL query syntax that is incompatible with the database proxy service used in some production clusters. GitHub responded by rolling back the deployment and fixing a misconfiguration in development and CI environments to prevent similar issues in the future.

  March 11 22:45 UTC (lasting 2 hours and 3 minutes)

  On March 11, GitHub experienced service degradation from 22:45 to 00:48 UTC due to an inadvertent deployment of network configuration to the wrong environment. This led to intermittent errors in various services, including API requests, GitHub Copilot, GitHub secret scanning, and 2FA using GitHub Mobile. The issue was detected within 4 minutes, and a rollback was initiated immediately. The majority of impact was mitigated by 22:54 UTC. However, the rollback failed in one data center due to system-created configuration records missing a required field, causing 0.4% of requests to continue failing. Full rollback was successful after manual intervention to correct the configuration data, enabling full service restoration by 00:48 UTC. GitHub has implemented measures for safer configuration changes, such as prevention and automatic cleanup of obsolete configuration and faster issue detection, to prevent similar issues in the future.

  ---

  Please follow our status page for real-time updates on status changes and post-incident recaps. To learn more about what we’re working on, check out the GitHub Engineering Blog.

  The post GitHub Availability Report: March 2024 appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-04-10-github-availability-report-march-2024/
• 

  4 ways GitHub engineers use GitHub Copilot
  • sorangutan  

  1
  1
  Posts
  6
  Views

  

  Just recently, I was coding a new feature for GitHub Copilot Chat. My task was to enable the chat to recognize a user’s project dependencies, allowing it to provide magical answers when the user poses a question. While I could have easily listed the project dependencies and considered the task complete, I knew that to extract top-notch responses from these large language models, I needed to be careful to not overload the prompt to avoid confusing the model by providing too much context. This meant pre-processing the dependency list and selecting the most relevant ones to include in the chat prompt.

  Creating machine-processable formats for the most prominent frameworks across various programming languages would have consumed days. It was during this time that I experienced one of those “Copilot moments.”

  I simply queried the chat in my IDE:

  Look at the data structure I have selected and create at least 10 examples that conform to the data structure. The data should cover the most prominent frameworks for the Go programming language.

  Voilà, there it was my initial batch of machine-processable dependencies. Just 30 minutes later, I had amassed a comprehensive collection of significant dependencies for nearly all supported languages, complete with parameterized unit tests. Completing a task that would likely have taken days without GitHub Copilot, in just 30 minutes, was truly remarkable.

  This led me to ponder: what other “Copilot moments” might my colleagues here at GitHub have experienced? Thus, here are a few ways we use GitHub Copilot at GitHub.

  1. Semi-automating repetitive tasks

  Semi-automating repetitive tasks is a topic that resonates with a colleague of mine from another team. He mentions that they are tasked with developing and maintaining several live services, many of which utilize protocol buffers for data communication. During maintenance, they often encounter a situation where they need to increment ID numbers in the protobuf definitions, as illustrated in the code snippet below:

  protobuf
  
  google.protobuf.StringValue fetcher = 130
  
    [(opts.cts_opt)={src:"Properties" key:"fetcher"}];
  
  google.protobuf.StringValue proxy_enabled = 131
  
    [(opts.cts_opt)={src:"Properties" key:"proxy_enabled"}];
  
  google.protobuf.StringValue proxy_auth = 132
  
    [(opts.cts_opt)={src:"Properties" key:"proxy_auth"}];
  

  He particularly appreciates having GitHub Copilot completions in the editor for these tasks. It serves as a significant time saver, eliminating the need to manually generate ID numbers. Instead, one can simply tab through the completion suggestions until the task is complete.

  2. Avoid getting side tracked

  Here’s another intriguing use case I heard about from a colleague. He needed to devise a regular expression to capture a Markdown code block and extract the language identifier. Fully immersed in his work, he preferred not to interrupt his flow by switching to chat, even though it could have provided a solution. Instead, he employed a creative approach by formalizing his task in a code comment:

  // The string above contains a code block with a language identifier.
  // Create a regexp that matches the code block and captures the language 
  identifier.
  // Use tagged capture groups for the language and the code. 
  

  This prompted GitHub Copilot to generate the regular expression as the subsequent statement in his editor:

  const re = /```(?<lang>\w+)(?<code>[\s\S]+?)```/;

  With the comment deleted, the task was swiftly accomplished!

  

  3. Structuring data-related notes

  During a pleasant coffee chat, one of our support engineers shared an incident she experienced with a colleague last week. It was a Friday afternoon, and they were attempting to troubleshoot an issue for a specific customer. Eventually, they pinpointed the solution by creating various notes in VSCode. At GitHub, we prioritize remote collaboration. Thus, merely resolving the task wasn’t sufficient; it was also essential to inform our colleagues about the process to ensure the best possible experience for future customer requests. Consequently, even after completing this exhaustive task, they needed to document how they arrived at the solution.

  She initiated GitHub Copilot Chat and simply typed something along the lines of, “Organize my notes, structure them, and compile the data in the editor into Markdown tables.” Within seconds, the task was completed, allowing them to commence their well-deserved weekend.

  4. Exploring and learning

  Enhancing and acquiring new skills are integral aspects of every engineer’s journey. John Berryman, a colleague of mine, undertook the challenge of leveraging GitHub Copilot to tackle a non-trivial coding task in a completely unfamiliar programming language. His goal was to delve into Rust, so on a Sunday, he embarked on this endeavor with the assistance of GitHub Copilot Chat. The task he set out to accomplish was to develop a program capable of converting any numerical input into its written English equivalent. While initially seeming straightforward, this task presented various complexities such as handling teen numbers, naming conventions for tens, placement of “and” in the output, and more.

  Twenty-three minutes and nine seconds later, he successfully produced a functional version written in Rust, despite having no prior experience with the language. Notably, he documented his entire process, recording himself throughout the endeavor.

  Berryman uses an older, experimental version of GitHub Copilot to write a program in Rust.

  Your very own GitHub Copilot moment

  I found it incredibly enlightening to discover how my fellow Hubbers utilize GitHub Copilot, and their innovative approaches inspired me to incorporate some of their ideas into my daily workflows. If you’re eager to explore GitHub Copilot firsthand, getting started is a breeze. Simply install it into your preferred editor and ask away.

  The post 4 ways GitHub engineers use GitHub Copilot appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-04-09-4-ways-github-engineers-use-github-copilot/
• 

  What is retrieval-augmented generation, and what does it do for generative AI?
  • sorangutan  

  1
  1
  Posts
  5
  Views

  

  One of the hottest topics in AI right now is RAG, or retrieval-augmented generation, which is a retrieval method used by some AI tools to improve the quality and relevance of their outputs.

  Organizations want AI tools that use RAG because it makes those tools aware of proprietary data without the effort and expense of custom model training. RAG also keeps models up to date.  When generating an answer without RAG, models can only draw upon data that existed when they were trained. With RAG, on the other hand, models can leverage a private database of newer information for more informed responses.

  We talked to GitHub Next’s Senior Director of Research, Idan Gazit, and Software Engineer, Colin Merkel, to learn more about RAG and how it’s used in generative AI tools.

  Why everyone’s talking about RAG

  One of the reasons you should always verify outputs from a generative AI tool is because its training data has a knowledge cut-off date. While models are able to produce outputs that are tailored to a request, they can only reference information that existed at the time of their training. But with RAG, an AI tool can use data sources beyond its model’s training data to generate an output.

  The difference between RAG and fine-tuning

  Most organizations currently don’t train their own AI models. Instead, they customize pre-trained models to their specific needs, often using RAG or fine-tuning. Here’s a quick breakdown of how these two strategies differ.

  Fine-tuning requires adjusting a model’s weights, which results in a highly customized model that excels at a specific task. It’s a good option for organizations that rely on codebases written in a specialized language, especially if the language isn’t well-represented in the model’s original training data.

  RAG, on the other hand, doesn’t require weight adjustment. Instead, it retrieves and gathers information from a variety of data sources to augment a prompt, which results in an AI model generating a more contextually relevant response for the end user.

  Some organizations start with RAG and then fine-tune their models to accomplish a more specific task. Other organizations find that RAG is a sufficient method for AI customization alone.

  How AI models use context

  In order for an AI tool to generate helpful responses, it needs the right context. This is the same dilemma we face as humans when making a decision or solving a problem. It’s hard to do when you don’t have the right information to act on.

  So, let’s talk more about context in the context () of generative AI:

  • Today’s generative AI applications are powered by large language models (LLMs) that are structured as transformers, and all transformer LLMs have a context window— the amount of data that they can accept in a single prompt. Though context windows are limited in size, they can and will continue to grow larger as more powerful models are released.

  • Input data will vary depending on the AI tool’s capabilities. For instance, when it comes to GitHub Copilot in the IDE, input data comprises all of the code in the file that you’re currently working on. This is made possible because of our Fill-in-the-Middle (FIM) paradigm, which makes GitHub Copilot aware of both the code before your cursor (the prefix) and after your cursor (the suffix).

    GitHub Copilot also processes code from your other open tabs (a process we call neighboring tabs) to potentially find and add relevant information to the prompt. When there are a lot of open tabs, GitHub Copilot will scan the most recently reviewed ones.

  • Because of the context window’s limited size, the challenge of ML engineers is to figure out what input data to add to the prompt and in what order to generate the most relevant suggestion from the AI model. This task is known as prompt engineering.

  How RAG enhances an AI model’s contextual understanding

  With RAG, an LLM can go beyond training data and retrieve information from a variety of data sources, including customized ones.

  When it comes to GitHub Copilot Chat within GitHub.com and in the IDE, input data can include your conversation with the chat assistant, whether it’s code or natural language, through a process called in-context learning. It can also include data from indexed repositories (public or private), a collection of Markdown documentation across repositories (that we refer to as knowledge bases), and results from integrated search engines. From these other sources, RAG will retrieve additional data to augment the initial prompt. As a result, it can generate a more relevant response.

  The type of input data used by GitHub Copilot will depend on which GitHub Copilot plan you’re using.

  

  RAG and semantic search

  Unlike keyword search or Boolean search operators, an ML-powered semantic search system uses its training data to understand the relationship between your keywords. So, rather than view, for example, “cats” and “kittens” as independent terms as you would in a keyword search, a semantic search system can understand, from its training, that those words are often associated with cute videos of the animal. Because of this, a search for just “cats and kittens” might rank a cute animal video as a top search result.

  How does semantic search improve the quality of RAG retrievals? When using a customized database or search engine as a RAG data source, semantic search can improve the context added to the prompt and overall relevance of the AI-generated output.

  The semantic search process is at the heart of retrieval. “It surfaces great examples that often elicit great results,” Gazit says.

  Developers can use Copilot Chat on GitHub.com to ask questions and receive answers about a codebase in natural language, or surface relevant documentation and existing solutions.

  RAG data sources: Where RAG uses semantic search

  You’ve probably read dozens of articles (including some of our own) that talk about RAG, vector databases, and embeddings. And even if you haven’t, here’s something you should know: RAG doesn’t require embeddings or vector databases.

  A RAG system can use semantic search to retrieve relevant documents, whether from an embedding-based retrieval system, traditional database, or search engine. The snippets from those documents are then formatted into the model’s prompt. We’ll provide a quick recap of vector databases and then, using GitHub Copilot Enterprise as an example, cover how RAG retrieves data from a variety of sources.

  Vector databases

  Vector databases are optimized for storing embeddings of your repository code and documentation. They allow us to use novel search parameters to find matches between similar vectors.

  To retrieve data from a vector database, code and documentation are converted into embeddings, a type of high-dimensional vector, to make them searchable by a RAG system.

  Here’s how RAG retrieves data from vector databases: while you code in your IDE, algorithms create embeddings for your code snippets, which are stored in a vector database. Then, an AI coding tool can search that database by embedding similarity to find snippets from across your codebase that are related to the code you’re currently writing and generate a coding suggestion. Those snippets are often highly relevant context, enabling an AI coding assistant to generate a more contextually relevant coding suggestion. GitHub Copilot Chat uses embedding similarity in the IDE and on GitHub.com, so it finds code and documentation snippets related to your query.

  Embedding similarity  is incredibly powerful because it identifies code that has subtle relationships to the code you’re editing.

  “Embedding similarity might surface code that uses the same APIs, or code that performs a similar task to yours but that lives in another part of the codebase,” Gazit explains. “When those examples are added to a prompt, the model’s primed to produce responses that mimic the idioms and techniques that are native to your codebase—even though the model was not trained on your code.”

  General text search and search engines

  With a general text search, any documents that you want to be accessible to the AI model are indexed ahead of time and stored for later retrieval. For instance, RAG in GitHub Copilot Enterprise can retrieve data from files in an indexed repository and Markdown files across repositories.

  Learn more about GitHub Copilot Enterprise features
  

  RAG can also retrieve information from external and internal search engines. When integrated with an external search engine, RAG can search and retrieve information from the entire internet. When integrated with an internal search engine, it can also access information from within your organization, like an internal website or platform. Integrating both kinds of search engines supercharges RAG’s ability to provide relevant responses.

  For instance, GitHub Copilot Enterprise integrates both Bing, an external search engine, and an internal search engine built by GitHub into Copilot Chat on GitHub.com. Bing integration allows GitHub Copilot Chat to conduct a web search and retrieve up-to-date information, like about the latest Java release. But without a search engine searching internally, ”Copilot Chat on GitHub.com cannot answer questions about your private codebase unless you provide a specific code reference yourself,” explains Merkel, who helped to build GitHub’s internal search engine from scratch.

  Here’s how this works in practice. When a developer asks a question about a repository to GitHub Copilot Chat in GitHub.com, RAG in Copilot Enterprise uses the internal search engine to find relevant code or text from indexed files to answer that question. To do this, the internal search engine conducts a semantic search by analyzing the content of documents from the indexed repository, and then ranking those documents based on relevance. GitHub Copilot Chat then uses RAG, which also conducts a semantic search, to find and retrieve the most relevant snippets from the top-ranked documents. Those snippets are added to the prompt so GitHub Copilot Chat can generate a relevant response for the developer.

  Key takeaways about RAG

  RAG offers an effective way to customize AI models, helping to ensure outputs are up to date with organizational knowledge and best practices, and the latest information on the internet.

  GitHub Copilot uses a variety of methods to improve the quality of input data and contextualize an initial prompt, and that ability is enhanced with RAG. What’s more, the RAG retrieval method in GitHub Copilot Enterprise goes beyond vector databases and includes data sources like general text search and search engine integrations, which provides even more cost-efficient retrievals.

  Context is everything when it comes to getting the most out of an AI tool. To improve the relevance and quality of a generative AI output, you need to improve the relevance and quality of the input.

  As Gazit says, “Quality in, quality out.”

  Looking to bring the power of GitHub Copilot Enterprise to your organization? Learn more about GitHub Copilot Enterprise or get started now.

  The post What is retrieval-augmented generation, and what does it do for generative AI? appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-04-04-what-is-retrieval-augmented-generation-and-what-does-it-do-for-generative-ai/
• 

  How to use GitHub Copilot in your IDE: Tips, tricks, and best practices
  • sorangutan  

  1
  1
  Posts
  7
  Views

  

  AI has become an integral part of my workflow these days, and with the assistance of GitHub Copilot, I move a lot faster when I’m building a project. Having used AI tools to increase my productivity over the past year, I’ve realized that similar to learning how to use a new framework or library, we can enhance our efficiency with AI tools by learning how to best use them.

  In this blog post, I’ll share some of the daily things I do to get the most out of GitHub Copilot. I hope these tips will help you become a more efficient and productive user of the AI assistant.

  Beyond code completion

  To make full use of the power of GitHub Copilot, it’s important to understand its capabilities. GitHub Copilot is developing rapidly, and new features are being added all the time. It’s no longer just a code completion tool in your editor—it now includes a chat interface that you can use in your IDE, a command line tool via a GitHub CLI extension, a summary tool in your pull requests, a helper tool in your terminals, and much, much more.

  In a recent blog post, I’ve listed some of the ways you didn’t know you could use GitHub Copilot. This will give you a great overview of how much the AI assistant can currently do.

  But beyond interacting with GitHub Copilot, how do you help it give you better answers? Well, the answer to that needs a bit more context.

  Context, context, context

  If you understand Large Language Models ( LLMs), you will know that they are designed to make predictions based on the context provided. This means, the more contextually rich our input or prompt is, the better the prediction or output will be.

  As such, learning to provide as much context as possible is key when interacting with GitHub Copilot, especially with the code completion feature. Unlike ChatGPT where you need to provide all the data to the model in the prompt window, by installing GitHub Copilot in your editor, the assistant is able to infer context from the code you’re working on. It then uses that context to provide code suggestions.

  We already know this, but what else can we do to give it additional context?

  I want to share a few essential tips with you to provide GitHub Copilot with more context in your editor to get the most relevant and useful code out of it:

  1. Open your relevant files

  Having your files open provides GitHub Copilot with context. When you have additional files open, it will help to inform the suggestion that is returned. Remember, if a file is closed, GitHub Copilot cannot see the file’s content in your editor, which means it cannot get the context from those closed files.

  GitHub Copilot looks at the current open files in your editor to analyze the context, create a prompt that gets sent to the server, and return an appropriate suggestion.

  Have a few files open in your editor to give GitHub Copilot a bigger picture of your project. You can also use #editor in the chat interface to provide GitHub Copilot with additional context on your currently opened files in Visual Studio Code (VS Code) and Visual Studio.

  Remember to close unneeded files when context switching or moving on to the next task.

  2. Provide a top-level comment

  Just as you would give a brief, high-level introduction to a coworker, a top-level comment in the file you’re working in can help GitHub Copilot understand the overall context of the pieces you will be creating—especially if you want your AI assistant to generate the boilerplate code for you to get going.

  Be sure to include details about what you need and provide a good description so it has as much information as possible. This will help to guide GitHub Copilot to give better suggestions, and give it a goal on what to work on. Having examples, especially when processing data or manipulation strings, helps quite a bit.

  

  3. Set Includes and references

  It’s best to manually set the includes/imports or module references you need for your work, particularly if you’re working with a specific version of a package.

  GitHub Copilot will make suggestions, but you know what dependencies you want to use. This can also help to let GitHub Copilot know what frameworks, libraries, and their versions you’d like it to use when crafting suggestions.

  This can be helpful to jump start GitHub Copilot to a newer library version when it defaults to providing older code suggestions.

  4. Meaningful names matter

  The name of your variables and functions matter. If you have a function named foo or bar, GitHub Copilot will not be able to give you the best completion because it isn’t able to infer intent from the names.

  Just as the function name fetchData() won’t mean much to a coworker (or you after a few months), fetchData() won’t mean much to GitHub Copilot either.

  Implementing good coding practices will help you get the most value from GitHub Copilot. While GitHub Copilot helps you code and iterate faster, remember the old rule of programming still applies: garbage in, garbage out.

  

  5. Provide specific and well- scoped function comments

  Commenting your code helps you get very specific, targeted suggestions.

  A function name can only be so descriptive without being overly long, so function comments can help fill in details that GitHub Copilot might need to know. One of the neat features about GitHub Copilot is that it can determine the correct comment syntax that is typically used in your programming language for function / method comments and will help create them for you based on what the code does. Adding more detail to these as the first change you do then helps GitHub Copilot determine what you would like to do in code and how to interact with that function.

  Remember: Single, specific, short comments help GitHub Copilot provide better context.

  6. Provide sample code

  Providing sample code to GitHub Copilot will help it determine what you’re looking for. This helps to ground the model and provide it with even more context.

  It also helps GitHub Copilot generate suggestions that match the language and tasks you want to achieve, and return suggestions based on your current coding standards and practices. Unit tests provide one level of sample code at the individual function/method level, but you can also provide code examples in your project showing how to do things end to end. The cool thing about using GitHub Copilot long-term is that it nudges us to do a lot of the good coding practices we should’ve been doing all along.

  Learn more about providing context to GitHub Copilot by watching this Youtube video:

  Inline Chat with GitHub Copilot

  Inline chat

  Outside of providing enough context, there are some built-in features of GitHub Copilot that you may not be taking advantage of. Inline chat, for example, gives you an opportunity to almost chat with GitHub Copilot between your lines of code. By pressing CMD + I (CTRL + I on Windows) you’ll have Copilot right there to ask questions. This is a bit more convenient for quick fixes instead of opening up GitHub Copilot Chat’s side panel.

  This experience provides you with code diffs inline, which is awesome. There are also special slash commands available like creating documentation with just the slash of a button!

  

  Tips and tricks with GitHub Copilot Chat

  GitHub Copilot Chat provides an experience in your editor where you can have a conversation with the AI assistant. You can improve this experience by using built-in features to make the most out of it.

  8. Remove irrelevant requests

  For example, did you know that you can delete a previously asked question in the chat interface to remove it from the indexed conversation? Especially if it is no longer relevant?

  

  Doing this will improve the flow of conversation and give GitHub Copilot only the necessary information needed to provide you with the best output.

  9. Navigate through your conversation

  Another tip I found is to use the up and down arrows to navigate through your conversation with GitHub Copilot Chat. I found myself scrolling through the chat interface to find that last question I asked, then discovered I can just use my keyboard arrows just like in the terminal!

  10. Use the @workspace agent

  If you’re using VS Code or Visual Studio, remember that agents are available to help you go even further. The @workspace agent for example, is aware of your entire workspace and can answer questions related to it. As such, it can provide even more context when trying to get a good output from GitHub Copilot.

  11. Highlight relevant code

  Another great tip when using GitHub Copilot Chat is to highlight relevant code in your files before asking it questions. This will help to give targeted suggestions and just provides the assistant with more context into what you need help with.

  12. Organize your conversations with threads

  You can have multiple ongoing conversations with GitHub Copilot Chat on different topics by isolating your conversations with threads. We’ve provided a convenient way for you to start new conversations (thread) by clicking the + sign on the chat interface.

  

  13. Slash Commands for common tasks

  Slash commands are awesome, and there are quite a few of them. We have commands to help you explain code, fix code, create a new notebook, write tests, and many more. They are just shortcuts to common prompts that we’ve found to be particularly helpful in day-to-day development from our own internal usage.

  Command	Description	Usage
  /explain	Get code explanations	Open file with code or highlight code you want explained and type: /explain what is the fetchPrediction method?
  /fix	Receive a proposed fix for the problems in the selected code	Highlight problematic code and type: /fix propose a fix for the problems in fetchAirports route
  /tests	Generate unit tests for selected code	Open file with code or highlight code you want tests for and type: /tests
  /help	Get help on using Copilot Chat	Type: /help what can you do?
  /clear	Clear current conversation	Type: /clear
  /doc	Add a documentation comment	Highlight code and type: /doc You can also press CMD+I in your editor and type /doc/ inline
  /generate	Generate code to answer your question	Type: /generate code that validates a phone number
  /optimize	Analyze and improve running time of the selected code	Highlight code and type: /optimize fetchPrediction method
  /clear	Clear current chat	Type: /clear
  /new	Scaffold code for a new workspace	Type: /new create a new django app
  /simplify	Simplify the selected code	Highlight code and type: /simplify
  /feedback	Provide feedback to the team	Type: /feedback

  See the following image for commands available in VS Code:

  

  14. Attach relevant files for reference

  In Visual Studio and VS Code, you can attach relevant files for GitHub Copilot Chat to reference by using #file. This scopes GitHub Copilot to a particular context in your code base and provides you with a much better outcome.

  To reference a file, type # in the comment box, choose #file and you will see a popup where you can choose your file. You can also type #file_name.py in the comment box. See below for an example:

  15. Start with GitHub Copilot Chat for faster debugging

  These days whenever I need to debug some code, I turn to GitHub Copilot Chat first. Most recently, I was implementing a decision tree and performed a k-fold cross-validation. I kept getting the incorrect accuracy scores and couldn’t figure out why. I turned to GitHub Copilot Chat for some assistance and it turns out I wasn’t using my training data set (X_train, y_train), even though I thought I was:

  I'm catching up on my AI/ML studies today. I had to implement a DecisionTree and use the cross_val_score method to evaluate the model's accuracy score.

  I couldn't figure out why the incorrect values for the accuracy scores were being returned, so I turned to Chat for some help pic.twitter.com/xn2ctMjAnr

  — Kedasha is learning about AI + ML ✨ (@itsthatladydev) March 23, 2024

  I figured this out a lot faster than I would’ve with external resources. I want to encourage you to start with GitHub Copilot Chat in your editor to get debugging help faster instead of going to external resources first. Follow my example above by explaining the problem, pasting the problematic code, and asking for help. You can also highlight the problematic code in your editor and use the /fix command in the chat interface.

  Be on the lookout for sparkles!

  In VS Code, you can quickly get help from GitHub Copilot by looking out for “magic sparkles.” For example, in the commit comment section, clicking the magic sparkles will help you generate a commit message with the help of AI. You can also find magic sparkles inline in your editor as you’re working for a quick way to access GitHub Copilot inline chat.

  Pressing them will use AI to help you fill out the data and more magic sparkles are being added where we find other places for GitHub Copilot to help in your day-to-day coding experience.

  Know where your AI assistant shines

  To get the best and most out of the tool, remember that context and prompt crafting is essential to keep in mind. Understanding where the tool shines best is also important. Some of the things GitHub Copilot is very good at include boilerplate code and scaffolding, writing unit tests, writing documentation, pattern matching, explaining uncommon or confusing syntax, cron jobs, and regex, and helping you remember things you’ve forgotten and debugging.

  But never forget that you are in control, and GitHub Copilot is here as just that, your copilot. It is a tool that can help you write code faster, and it’s up to you to decide how to best use it.

  It is not here to do your work for you or to write everything for you. It will guide you and nudge you in the right direction just as a coworker would if you asked them questions or for guidance on a particular issue.

  I hope these tips and best practices were helpful. You can significantly improve your coding efficiency and output by properly leveraging GitHub Copilot. Learn more about how GitHub Copilot works by reading Inside GitHub: Working with the LLMs behind GitHub Copilot and Customizing and fine-tuning LLMs: What you need to know.

  Harness the power of GitHub Copilot. Learn more or get started now.

  The post How to use GitHub Copilot in your IDE: Tips, tricks, and best practices appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-03-25-how-to-use-github-copilot-in-your-ide-tips-tricks-and-best-practices/
• 

  Hard and soft skills for developers coding in the age of AI
  • sorangutan  

  1
  1
  Posts
  11
  Views

  

  As AI continues to shape the development landscape, developers are navigating a new frontier—not one that will make their careers obsolete, but one that will require their skills and instincts more than ever.

  Sure, AI is revolutionizing software development, but that revolution ultimately starts and stops with developers. That’s because these tools need to have a pilot in control. While they can improve the time to code and ship, they can’t serve as a replacement for human oversight and coding abilities.

  We recently conducted research into the evolving relationship between developers and AI tools and found that AI has the potential to alleviate the cognitive burden of complex tasks for developers. Instead of being used solely as a second pair of hands, AI tools can also be used more like a second brain, helping developers be more well-rounded and efficient.

  In essence, AI can reduce mental strain so that developers can focus on anything from learning a new language to creating high-quality solutions for complex problems. So, if you’re sitting here wondering if you should learn how to code or how AI fits into your current coding career, we’re here to tell you what you need to know about your work in the age of AI.

  A brief history of AI-powered techniques and tools

  While the media buzz around generative AI is relatively new, AI coding tools have been around —in some form or another—much longer than you might expect. To get you up to speed, here’s a brief timeline of the AI-powered tools and techniques that have paved the way for the sophisticated coding tools we have today:

  1950s: Autocoder was one of the earliest attempts at automatic coding. Developed in the 1950s by IBM, Autocoder translated symbolic language into machine code, streamlining programming tasks for early computers.

  1958: LISP, one of the oldest high-level programming languages created by John McCarthy, introduced symbolic processing and recursive functions, laying the groundwork for AI programming. Its flexibility and expressive power made it a popular choice for AI research and development.

  (defun factorial (n)
    (if (<= n 1)
        1
        (* n (factorial (- n 1)))))
  

  
  This function calculates the factorial of a non-negative integer ‘n’ in LISP. If ‘n’ is 0 or 1, the factorial is 1. Otherwise, it recursively multiplies ‘n’ by the factorial of n-1 until ‘n’ reaches 1.
  

  1970: SHRDLU, developed by Terry Winograd at MIT, was an early natural language understanding program that could interpret and respond to commands in a restricted subset of English, and demonstrated the potential for AI to understand and generate human language.

  

  SHRDLU, operating in a block world, aimed to understand and execute natural language instructions for manipulating virtual objects made of various shaped blocks.
  [Source: Cryptlabs]

  1980s: In the 1980s, code generators, such as The Last One, emerged as tools that could automatically generate code based on user specifications or predefined templates. While not strictly AI-powered in the modern sense, they laid the foundation for later advancements in code generation and automation.

  

  
  “Personal Computer” magazine cover from 1982 that explored the program, The Last One.
  [Source: David Tebbutts]

  1990s: Neural network–based predictive models were increasingly applied to code-related tasks, such as predicting program behavior, detecting software defects, and analyzing code quality. These models leveraged the pattern recognition capabilities of neural networks to learn from code examples and make predictions.

  2000s: Refactoring tools with AI capabilities began to emerge in the 2000s, offering automated assistance for restructuring and improving code without changing its external behavior. These tools used AI techniques to analyze code patterns, identify opportunities for refactoring, and suggest appropriate refactorings to developers.

  These early AI-powered coding tools helped shape the evolution of software development and set the stage for today’s AI-driven coding assistance and automation tools, which continue to evolve seemingly every day.

  Evolving beyond the IDE

  Initially, AI tools were primarily confined to the integrated development environment (IDE), aiding developers in writing and refining code. But now, we’re starting to see AI touch every part of the software development lifecycle (SDLC), which we’ve found can increase productivity, streamline collaboration, and accelerate innovation for engineering teams.

  In a 2023 survey of 500 U.S.-based developers, 70% reported experiencing significant advantages in their work, while over 80% said these tools will foster greater collaboration within their teams. Additionally, our research revealed that developers, on average, complete tasks up to 55% faster when using AI coding tools.

  Here’s a quick look at where modern AI-powered coding tools are and some of the technical benefits they provide today:

  • Code completion and suggestions. Tools like GitHub Copilot use large language models (LLMs) to analyze code context and generate suggestions to make coding more efficient. Developers can now experience a notable boost in productivity as AI can suggest entire lines of code based on the context and patterns learned from developers’ code repositories, rather than just the code in the editor. Copilot also leverages the vast amount of open-source code available on GitHub to enhance its understanding of various programming languages, frameworks, and libraries, to provide developers with valuable code suggestions.
  • Generative AI in your repositories. Developers can use tools like GitHub Copilot Chat to ask questions and gain a deeper understanding of their code base in real time. With AI gathering context of legacy code and processes within your repositories, GitHub Copilot Enterprise can help maintain consistency and best practices across an organization’s codebase when suggesting solutions.
  • Natural language processing (NLP). AI has recently made great strides in understanding and generating code from natural language prompts. Think of tools like ChatGPT where developers can describe their intent in plain language, and the AI produces valuable outputs, such as executable code or explanations for that code functionality.
  • Enhanced debugging with AI. These tools can analyze code for potential errors, offering possible fixes by leveraging historical data and patterns to identify and address bugs more effectively.

  To implement AI tools, developers need technical skills and soft skills

  There are two different subsets of skills that can help developers as they begin to incorporate AI tools into their development workflows: technical skills and soft skills. Having both technical chops and people skills is super important for developers when they’re diving into AI projects—they need to know their technical skills to make those AI tools work to their advantage, but they also need to be able to work well with others, solve problems creatively, and understand the big picture to make sure the solutions they come up with actually hit the mark for the folks using them.

  Let’s take a look at those technical skills first.

  Getting technical

  Prompt engineering

  Prompt engineering involves crafting well-designed prompts or instructions that guide the behavior of AI models to produce desired outputs or responses. It can be pretty frustrating when AI-powered coding assistants don’t generate a valuable output, but that can often be quickly remedied by adjusting how you communicate with the AI. Here are some things to keep in mind when crafting natural language prompts:

  • Be clear and specific. Craft direct and contextually relevant prompts to guide AI models more effectively.
  • Experiment and iterate. Try out various prompt variations and iterate based on the outputs you receive.
  • Validate, validate, validate. Similar to how you would inspect code written by a colleague, it’s crucial to consistently evaluate, analyze, and verify code generated by AI algorithms.

  Code reviews

  AI is helpful, but it isn’t perfect. While LLMs are trained on large amounts of data, they don’t inherently understand programming concepts the way humans do. As a result, the code they generate may contain syntax errors, logic flaws, or other issues. That’s why developers need to rely on their coding competence and organizational knowledge to make sure that they aren’t pushing faulty code into production.

  For a successful code review, you can start out by asking: does this code change accomplish what it is supposed to do? From there, you can take a look at this in-depth checklist of more things to keep in mind when reviewing AI-generated code suggestions.

  Testing and security

  With AI’s capabilities, developers can now generate and automate tests with ease, making their testing responsibilities less manual and more strategic. To ensure that the AI-generated tests cover critical functionality, edge cases, and potential vulnerabilities effectively, developers will need a strong foundational knowledge of programming skills, testing principles, and security best practices. This way, they’ll be able to interpret and analyze the generated tests effectively, identify potential limitations or biases in the generated tests, and augment with manual tests as necessary.

  Here’s a few steps you can take to assess the quality and reliability of AI-generated tests:

  • Verify test assertions. Check if the assertions made by the AI-generated tests are verifiable and if they align with the expected behavior of the software.
  • Assess test completeness. Evaluate if the AI-generated tests cover all relevant scenarios and edge cases and identify any gaps or areas where additional testing may be required to achieve full coverage.
  • Identify limitations and biases. Consider factors such as data bias, algorithmic biases, and limitations of the AI model used for test generation.
  • Evaluate results. Investigate any test failures or anomalies to determine their root causes and implications for the software.

  For those beginning their coding journey, check out the GitHub Learning Pathways to gain deeper insights into testing strategies and security best practices with GitHub Actions and GitHub Advanced Security.

  You can also bolster your security skills with this new, open source Secure Code Game 🎮.

  And now, the soft skills

  As developers leverage AI to build what’s next, having soft skills—like the ability to communicate and collaborate well with colleagues—is becoming more important than ever.

  Let’s take a more in-depth look at some soft skills that developers can focus on as they continue to adopt AI tools:

  • Communication. Communication skills are paramount to collaborating with team members and stakeholders to define project requirements, share insights, and address challenges. They’re also important as developers navigate prompt engineering. The best AI prompts are clear, direct, and well thought out—and communicating with fellow humans in the workplace isn’t much different.

  Did you know that prompt engineering best practices just might help you build your communication skills with colleagues? Check out this thought piece from Harvard Business Review for more insights.

  • Problem solving. Developers may encounter complex challenges or unexpected issues when working with AI tools, and the ability to think creatively and adapt to changing circumstances is crucial for finding innovative solutions.
  • Adaptability. The rapid advancement of AI technology requires developers to be adaptable and willing to embrace new tools, methodologies, and frameworks. Plus, cultivating soft skills that promote a growth mindset allows individuals to consistently learn and stay updated as AI tools continue to evolve.
  • Ethical thinking. Ethical considerations are important in AI development, particularly regarding issues such as bias, fairness, transparency, and privacy. Integrity and ethical reasoning are essential for making responsible decisions that prioritize the well-being of users and society at large.
  • Empathy. Developers are often creating solutions and products for end users, and to create valuable user experiences, developers need to be able to really understand the user’s needs and preferences. While AI can help developers create these solutions faster, through things like code generation or suggestions, developers still need to be able to QA the code and ensure that these solutions still prioritize the well-being of diverse user groups.

  Sharpening these soft skills can ultimately augment a developer’s technical expertise, as well as enable them to work more effectively with both their colleagues and AI tools.

  Take this with you

  As AI continues to evolve, it’s not just changing the landscape of software development; it’s also poised to revolutionize how developers learn and write code. AI isn’t replacing developers—it’s complementing their work, all while providing them with the opportunity to focus more on coding and building their skill sets, both technical and interpersonal.

  If you’re interested in improving your skills along your AI-powered coding journey, check out these repositories to start building your own AI based projects. Or you can test out GitHub Copilot, which can help you learn new programming languages, provide coding suggestions, and ask important coding questions right in your terminal.

  The post Hard and soft skills for developers coding in the age of AI appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-03-07-hard-and-soft-skills-for-developers-coding-in-the-age-of-ai/
• 

  How GitHub uses merge queue to ship hundreds of changes every day
  • sorangutan  

  1
  1
  Posts
  6
  Views

  

  At GitHub, we use merge queue to merge hundreds of pull requests every day. Developing this feature and rolling it out internally did not happen overnight, but the journey was worth it—both because of how it has transformed the way we deploy changes to production at scale, but also how it has helped improve the velocity of customers too. Let’s take a look at how this feature was developed and how you can use it, too.

  Merge queue is generally available and is also now available on GitHub Enterprise Server! Find out more.

  Why we needed merge queue

  In 2020, engineers from across GitHub came together with a goal: improve the process for deploying and merging pull requests across the GitHub service, and specifically within our largest monorepo. This process was becoming overly complex to manage, required special GitHub-only logic in the codebase, and required developers to learn external tools, which meant the engineers developing for GitHub weren’t actually using GitHub in the same way as our customers.

  To understand how we got to this point in 2020, it’s important to look even further back.

  By 2016, nearly 1,000 pull requests were merging into our large monorepo every month. GitHub was growing both in the number of services deployed and in the number of changes shipping to those services. And because we deploy changes prior to merging them, we needed a more efficient way to group and deploy multiple pull requests at the same time. Our solution at this time was trains. A train was a special pull request that grouped together multiple pull requests (passengers) that would be tested, deployed, and eventually merged at the same time. A user (called a conductor) was responsible for handling most aspects of the process, such as starting a deployment of the train and handling conflicts that arose. Pipelines were added to help manage the rollout path. Both these systems (trains and pipelines) were only used on our largest monorepo and were implemented in our internal deployment system.

  Trains helped improve velocity at first, but over time started to negatively impact developer satisfaction and increase the time to land a pull request. Our internal Developer Experience (DX) team regularly polls our developers to learn about pain points to help inform where to invest in improvements. These surveys consistently rated deployment as the most painful part of the developer’s daily experience, highlighting the complexity and friction involved with building and shepherding trains in particular. This qualitative data was backed by our quantitative metrics. These showed a steady increase in the time it took from pull request to shipped code.

  Trains could also grow large, containing the changes of 15 pull requests. Large trains frequently “derailed” due to a deployment issue, conflicts, or the need for an engineer to remove their change. On painful occasions, developers could wait 8+ hours after joining a train for it to ship, only for it to be removed due to a conflict between two pull requests in the train.

  Trains were also not used on every repository, meaning the developer experience varied significantly between different services. This led to confusion when engineers moved between services or contributed to services they didn’t own, which is fairly frequent due to our inner source model.

  In short, our process was significantly impacting the productivity of our engineering teams—both in our large monorepo and service repositories.

  Building a better solution for us and eventually for customers

  By 2020, it was clear that our internal tools and processes for deploying and merging across our repositories were limiting our ability to land pull requests as often as we needed. Beyond just improving velocity, it became clear that our new solution needed to:

  1. Improve the developer experience of shipping. Engineers wanted to express two simple intents: “I want to ship this change” and “I want to shift to other work;” the system should handle the rest.
  2. Avoid having problematic pull requests impact everyone. Those causing conflicts or build failures should not impact all other pull requests waiting to merge. The throughput of the overall system should be favored over fairness to an individual pull request.
  3. Be consistent and as automated as possible across our services and repositories. Manual toil by engineers should be removed wherever possible.

  The merge queue project began as part of an overall effort within GitHub to improve availability and remove friction that was preventing developers from shipping at the frequency and level of quality that was needed. Initially, it was only focused on providing a solution for us, but was built with the expectation that it would eventually be made available to customers.

  By mid-2021, a few small, internal repositories started testing merge queue, but moving our large monorepo would not happen until the next year for a few reasons.

  For one, we could not stop deploying for days or weeks in order to swap systems. At every stage of the project we had to have a working system to ship changes. At a maximum, we could block deployments for an hour or so to run a test or transition. GitHub is remote-first and we have engineers throughout the world, so there are quieter times but never a free pass to take the system offline.

  Changing the way thousands of developers deploy and merge changes also requires lots of communication to ensure teams are able to maintain velocity throughout the transition. Training 1,000 engineers on a new system overnight is difficult, to say the least.

  By rolling out changes to the process in phases (and sometimes testing and rolling back changes early in the morning before most developers started working) we were able to slowly transition our large monorepo and all of our repositories responsible for production services onto merge queue by 2023.

  How we use merge queue today

  Merge queue has become the single entry point for shipping code changes at GitHub. It was designed and tested at scale, shipping 30,000+ pull requests with their associated 4.5 million CI runs, for GitHub.com before merge queue was made generally available.

  For GitHub and our “deploy the merge process,” merge queue dynamically forms groups of pull requests that are candidates for deployment, kicks off builds and tests via GitHub Actions, and ensures our main branch is never updated to a failing commit by enforcing branch protection rules. Pull requests in the queue that conflict with one another are automatically detected and removed, with the queue automatically re-forming groups as needed.

  Because merge queue is integrated into the pull request workflow (and does not require knowledge of special ChatOps commands, or use of labels or special syntax in comments to manage state), our developer experience is also greatly improved. Developers can add their pull request to the queue and, if they spot an issue with their change, leave the queue with a single click.

  We can now ship larger groups without the pitfalls and frictions of trains. Trains (our old system) previously limited our ability to deploy more than 15 changes at once, but now we can now safely deploy 30 or more if needed.

  Every month, over 500 engineers merge 2,500 pull requests into our large monorepo with merge queue, more than double the volume from a few years ago. The average wait time to ship a change has also been reduced by 33%. And it’s not just numbers that have improved. On one of our periodic developer satisfaction surveys, an engineer called merge queue “one of the best quality-of-life improvements to shipping changes that I’ve seen a GitHub!” It’s not a stretch to say that merge queue has transformed the way GitHub deploys changes to production at scale.

  How to get started

  Merge queue is available to public repositories on GitHub.com owned by organizations and to all repositories on GitHub Enterprise (Cloud or Server).

  To learn more about merge queue and how it can help velocity and developer satisfaction on your busiest repositories, see our blog post, GitHub merge queue is generally available.

  Interested in joining GitHub? Check out our open positions or learn more about our platform.

  The post How GitHub uses merge queue to ship hundreds of changes every day appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-03-06-how-github-uses-merge-queue-to-ship-hundreds-of-changes-every-day/
• 

  Keeping repository maintainer information accurate
  • sorangutan  

  1
  1
  Posts
  6
  Views

  

  Companies and their structures are always evolving. Regardless of the reason, with people and information exchanging places, it’s easy for maintainership/ownership information about a repository to become outdated or unclear. Maintainers play a crucial role in guiding and stewarding a project, and knowing who they are is essential for efficient collaboration and decision-making. This information can be stored in the CODEOWNERS file but how can we ensure that it’s up to date? Let’s delve into why this matters and how the GitHub OSPO’s tool, cleanowners, can help maintainers achieve accurate ownership information for their projects.

  The importance of accurate maintainer information

  In any software project, having clear ownership guidelines is crucial for effective collaboration. Maintainers are responsible for reviewing contributions, merging changes, and guiding the project’s direction. Without clear ownership information, contributors may be unsure of who to reach out to for guidance or review. Imagine that you’ve discovered a high-risk security vulnerability and nobody is responding to your pull request to fix it, let alone coordinating that everyone across the company gets the patches needed for fixing it. This ambiguity can lead to delays and confusion, unfortunately teaching teams that it’s better to maintain control than to collaborate. These are not the outcomes we are hoping for as developers, so it’s important for us to consider how we can ensure active maintainership especially of our production components.

  CODEOWNERS files

  Solving this problem starts with documenting maintainers. A CODEOWNERS file, residing in the root of a repository, allows maintainers to specify individuals or teams who are responsible for reviewing and maintaining specific areas of the codebase. By defining ownership at the file or directory level, CODEOWNERS provides clarity on who is responsible for reviewing changes within each part of the project.

  CODEOWNERS not only streamlines the contribution process but also fosters transparency and accountability within the organization. Contributors know exactly who to contact for feedback, escalation, or approval, while maintainers can effectively distribute responsibilities and ensure that every part of the codebase has proper coverage.

  Ensuring clean and accurate CODEOWNERS files with cleanowners

  While CODEOWNERS is a powerful tool for managing ownership information, maintaining it manually can be tedious and easily-overlooked. To address this challenge, the GitHub OSPO developed cleanowners: a GitHub Action that automates the process of keeping CODEOWNERS files clean and up to date. If it detects that something needs to change, it will open a pull request so this problem gets addressed sooner rather than later.

  Here’s how cleanowners works:

  ---
  name: Weekly codeowners cleanup
  on:
    workflow_dispatch:
    schedule:
      - cron: '3 2 1 * *'
  
  permissions:
    issues: write
  
  jobs:
    cleanowners:
      name: cleanowners
      runs-on: ubuntu-latest
  
      steps:
        - name: Run cleanowners action
          uses: github/cleanowners@v1
          env:
            GH_TOKEN: ${{ secrets.GH_TOKEN }}
            ORGANIZATION: <YOUR_ORGANIZATION_GOES_HERE>
  

  This workflow, triggered by scheduled runs, ensures that the CODEOWNERS file is cleaned automatically. By leveraging cleanowners, maintainers can rest assured that ownership information is accurate, or it will be brought to the attention of the team via an automatic pull request requesting an update to the file. Here is an example where @zkoppert and @no-longer-in-this-org used to both be maintainers, but @no-longer-in-this-org has left the company and no longer maintains this repository.

  

  Dive in

  With tools like cleanowners, the task of managing CODEOWNERS files becomes actively managed instead of ignored, allowing maintainers to focus on what matters most: building and nurturing thriving software projects. By embracing clear and accurate ownership documentation practices, software projects can continue to flourish, guided by clear ownership and collaboration principles.

  Check out the repository for more information on how to configure and set up the action.

  The post Keeping repository maintainer information accurate appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-03-04-keeping-repository-maintainer-information-accurate/
• 

  How AI code generation works
  • sorangutan  

  1
  1
  Posts
  9
  Views

  

  Generative AI coding tools are changing software production for enterprises. Not just for their code generation abilities—from vulnerability detection and facilitating comprehension of unfamiliar codebases, to streamlining documentation and pull request descriptions, they’re fundamentally reshaping how developers approach application infrastructure, deployment, and their own work experience.

  We’re now witnessing a significant turning point. As AI models get better, refusing adoption would be like “asking an office worker to use a typewriter instead of a computer,” says Albert Ziegler, principal researcher and member of the GitHub Next research and development team.

  In this post, we’ll dive into the inner workings of AI code generation, exploring how it functions, its capabilities and benefits, and how developers can use it to enhance their development experience while propelling your enterprise forward in today’s competitive landscape.

  How to use AI to generate code

  AI code generation refers to full or partial lines of code that are generated by machines instead of human developers. This emerging technology leverages advanced machine learning models, particularly large language models (LLMs), to understand and replicate the syntax, patterns, and paradigms found in human-generated code.

  The AI models powering tools, like ChatGPT and GitHub Copilot, are trained on natural language text and source code from publicly available sources that include a diverse range of code examples. This training enables them to understand the nuances of various programming languages, coding styles, and common practices. As a result, the AI can generate code suggestions that are syntactically correct and contextually relevant based on input from developers.

  Favored by 55% of developers, our AI-powered pair programmer, GitHub Copilot, provides contextualized coding assistance based on your organization’s codebase across dozens of programming languages, and targets developers of all experience levels. With GitHub Copilot, developers can use AI to generate code in three ways:

  1. Type code and AI can autocomplete the code

  Autocompletions are the earliest version of AI code generation. John Berryman, a senior researcher of ML on the GitHub Copilot team, explains the user experience: “I’ll be writing code and taking a pause to think. While I’m doing that, the agent itself is also thinking, looking at surrounding code and content in neighboring tabs. Then it pops up on the screen as gray ‘ghost text’ that I can reject, partially accept, or fully accept and then, if necessary, modify.”

  While every developer can reap the benefits of using AI coding tools, experienced programmers can often feel these gains even more so. “In many cases, especially for experienced programmers in a familiar environment, this suggestion speeds us up. I would have written the same thing. It’s just faster to hit ‘tab’ (thus accepting the suggestion) than it is to write out those 20 characters by myself,” says Johan Rosenkilde, principal researcher for GitHub Next.

  Whether developers are new or highly skilled, they’ll often have to work in less familiar languages, and code completion suggestions using GitHub Copilot can lend a helping hand. “Using GitHub Copilot for code completion has really helped speed up my learning experience,” says Berryman. “I will often accept the suggestion because it’s something I wouldn’t have written on my own since I don’t know the syntax.”

  Using an AI coding tool has become an invaluable skill in itself. Why? Because the more developers practice coding with these tools, the faster they’ll get at using them.

  2. Explicit code comments codes using natural language to receive even better AI-generated code suggestions

  For experienced developers in unfamiliar environments, tools like GitHub Copilot can even help jog their memories.

  Let’s say a developer imports a new type of library they haven’t used before, or that they don’t remember. Maybe they’re looking to figure out the standard library function or the order of the argument. In these cases, it can be helpful to make GitHub Copilot more explicitly aware of where the developer wants to go by writing a comment.

  “It’s quite likely that the developer might not remember the formula, but they can recognize the formula, and GitHub Copilot can remember it by being prompted,” says Rosenkilde. This is where natural language commentary comes into play: it can be a shortcut for explaining intent when the developer is struggling with the first few characters of code that they need.

  If developers give specific names to their functions and variables, and write documentation, they can get better suggestions, too. That’s because GitHub Copilot can read the variable names and use them as an indicator for what that function should do.

  Suddenly that changes how developers write code for the better, because code with good variable and function names are more maintainable. And oftentimes the main job of a programmer is to maintain code, not write it from scratch.

  “When you push that code, someone is going to review it, and they will likely have a better time reviewing that code if it’s well named, if there’s even a hint of documentation in it, and so on,” says Rosenkilde. In this sense, the symbiotic relationship between the developer and the AI coding tool is not just beneficial for the developer, but for the entire team.

  3. Chat directly with AI

  With AI chatbots, code generation can be more interactive. GitHub Copilot Chat, for example, allows developers to interact with code by asking it to explain code, improve syntax, provide ideas, generate tests, and modify existing code—making it a versatile ally in managing coding tasks.

  Rosenkilde uses the different functionalities of GitHub Copilot:

  “When I want to do something and I can’t remember how to do it, I type the first few letters of it, and then I wait to see if Copilot can guess what I’m doing,” he says. “If that doesn’t work, maybe I delete those characters and I write a one liner in commentary and see whether Copilot can guess the next line. If that doesn’t work, then I go to Copilot Chat and explain in more detail what I want done.”

  Typically, Copilot Chat returns with something much more verbose and complete than what you get from GitHub Copilot code completion. “Namely, it describes back to you what it is you want done and how it can be accomplished. It gives you code examples, and you can respond and say, oh, I see where you’re going. But actually I meant it like this instead,” says Rosenkilde.

  But using AI chatbots doesn’t mean developers should be hands off. Mistakes in reasoning could lead the AI down a path of further mistakes if left unchecked. Berryman recommends that users should interact with the chat assistant in much the same way that you would when pair programming with a human. “Go back and forth with it. Tell the assistant about the task you are working on, ask it for ideas, have it help you write code, and critique and redirect the assistant’s work in order to keep it on the right track.”

  

  The importance of code reviews

  GitHub Copilot is designed to empower developers to execute their ideas. As long as there is some context for it to draw on, it will likely generate the type of code the developer wants. But this doesn’t replace code reviews between developers.

  Code reviews play an important role in maintaining code quality and reliability in software projects, regardless of whether AI coding tools are involved. In fact, the earlier developers can spot bugs in the code development process, the cheaper it is by orders of magnitude.

  Ordinary verification would be: does the code parse? Do the tests work? With AI code generation, Ziegler explains that developers should, “Scrutinize it in enough detail so that you can be sure the generated code is correct and bug-free. Because if you use tools like that in the wrong way and just accept everything, then the bugs that you introduce are going to cost you more time than you save.”

  Rosenkilde adds, “A review with another human being is not the same as that, right? It’s a conversation between two developers about whether this change fits into the kind of software they’re building in this organization. GitHub Copilot doesn’t replace that.”

  The advantages of using AI to generate code

  When developer teams use AI coding tools across the software development cycle, they experience a host of benefits, including:

  Faster development, more productivity

  AI code generation can significantly speed up the development process by automating repetitive and time-consuming tasks. This means that developers can focus on high-level architecture and problem-solving. In fact, 88% of developers reported feeling more productive when using GitHub Copilot.

  Rosenkilde reflects on his own experience with GitHub’s AI pair programmer: “95% of the time, Copilot brings me joy and makes my day a little bit easier. And this doesn’t change the code I would have written. It doesn’t change the way I would have written it. It doesn’t change the design of my code. All it does is it makes me faster at writing that same code.” And Rosenkilde isn’t alone: 60% of developers feel more fulfilled with their jobs when using GitHub Copilot.

  Mental load alleviated

  The benefits of faster development aren’t just about speed: they’re also about alleviating the mental effort that comes with completing tedious tasks. For example, when it comes to debugging, developers have to reverse engineer what went wrong. Detecting a bug can involve digging through an endless list of potential hiding places where it might be lurking, making it repetitive and tedious work.

  Rosenkilde explains, “Sometimes when you’re debugging, you just have to resort to creating print statements that you can’t get around. Thankfully, Copilot is brilliant at print statements.”

  A whopping 87% of developers reported spending less mental effort on repetitive tasks with the help of GitHub Copilot.

  Less context switching

  In software development, context switching is when developers move between different tasks, projects, or environments, which can disrupt their workflow and decrease productivity. They also often deal with the stress of juggling multiple tasks, remembering syntax details, and managing complex code structures.

  With GitHub Copilot developers can bypass several levels of context switching, staying in their IDE instead of searching on Google or jumping into external documentation.

  “When I’m writing natural language commentary,” says Rosenkilde, “GitHub Copilot code completion can help me. Or if I use Copilot Chat, it’s a conversation in the context that I’m in, and I don’t have to explain quite as much.”

  Generating code with AI helps developers offload the responsibility of recalling every detail, allowing them to focus on higher-level thinking, problem-solving, and strategic planning.

  Berryman adds, “With GitHub Copilot Chat, I don’t have to restate the problem because the code never leaves my trusted environment. And I get an answer immediately. If there is a misunderstanding or follow-up questions, they are easy to communicate with.”

  What to look for in enterprise-ready AI code generation tools

  Before you implement any AI into your workflow, you should always review and test tools thoroughly to make sure they’re a good fit for your organization. Here are a few considerations to keep in mind.

  Compliance

  • Regulatory compliance. Does the tool comply with relevant regulations in your industry?
  • Compliance certifications. Are there attestations that demonstrate the tool’s compliance with regulations?

  Security

  • Encryption. Is the data transmission and storage encrypted to protect sensitive information?
  • Access controls. Are you able to implement strong authentication measures and access controls to prevent unauthorized access?
  • Compliance with security standards. Is the tool compliant with industry standards?
  • Security audits. Does the tool undergo regular security audits and updates to address vulnerabilities?

  Privacy

  • Data handling. Are there clear policies for handling user data and does it adhere to privacy regulations like GDPR, CCPA, etc.?
  • Data anonymization. Does the tool support anonymization techniques to protect user privacy?

  Permissioning

  • Role-based access control. Are you able to manage permissions based on user roles and responsibilities?
  • Granular permissions. Can you control access to different features and functionalities within the tool?
  • Opt-in/Opt-out mechanisms. Can users control the use of their data and opt out if needed?

  Pricing

  • Understand the pricing model. is it based on usage, number of users, features, or other metrics?
  • Look for transparency. Is the pricing structure clear with no hidden costs?
  • Scalability. Does the pricing scale with your usage and business growth?

  Additionally, consider factors such as customer support, ease of integration with existing systems, performance, and user experience when evaluating AI coding tools. Lastly, it’s important to thoroughly assess how well the tool aligns with your organization’s specific requirements and priorities in each of these areas.

  Visit the GitHub Copilot Trust Center to learn more around security, privacy, and other topics.

  Can AI code generation be detected?

  The short answer here is: maybe.

  Let’s first give some context to the question. It’s never really the case that a whole code base is generated with AI, because large chunks of AI-generated code are very likely to be wrong. The standard code review process is a good way to avoid this, since large swaths of completely auto-generated code would stand out to a human developer as simply not working.

  For smaller amounts of AI-generated code, there is no way at the moment to detect traces of AI in code with true confidence. There are offerings that purport to classify whether content has AI-generated text, but there are limited equivalents for code, since you’d need a dedicated model to do it. Ziegler explains, “Computer generated code is good enough that it doesn’t leave any particular traces and normally has no clear tells.”

  At GitHub, the Copilot team makes use of a duplicate detection filter that detects exact duplicates in code. So, if you’re writing code and it’s an exact copy of something that exists elsewhere, then it’ll flag it.

  Is AI code generation secure?

  AI code generation is not any more insecure than human generated code. A combination of testing, manual code reviews, scanning, monitoring, and feedback loops can produce the same quality of code as your human-generated code.

  When it comes to code generated by GitHub Copilot, developers can use tools like code scanning, which actively reviews your code for potential security issues in real-time and seamlessly integrates the findings into the developer workflow.

  Ultimately, AI code generation will have vulnerabilities—but so does code written by human developers. As Ziegler explains, “It’s unclear whether computer generated code does particularly worse. So, the answer is not if you have GitHub Copilot, use a vulnerability checker. The answer is always use a vulnerability checker.”

  Watch this video for more tips and words of advice around secure coding best practices with AI.

  Empower your enterprise with AI code generation

  While the benefits to using AI code generation tools can be significant, it’s important to note that human oversight remains crucial to ensure that the generated code aligns with project goals, coding standards, and business needs.

  Tech leaders should embrace the use of AI code generation—not only to streamline development, but also to empower developer teams to collaborate, drive meaningful business outcomes, and deliver exceptional value to customers.

  Ready to get started with the world’s most widely adopted AI developer tool? Learn more or get started now.

  The post How AI code generation works appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-02-22-how-ai-code-generation-works/
• 

  GitHub Availability Report: January 2024
  • sorangutan  

  1
  1
  Posts
  17
  Views

  

  In January, we experienced three incidents that resulted in degraded performance across GitHub services.

  January 09 12:20 UTC (lasting 140 minutes)

  On January 9 between 12:20 and 14:40 UTC, services in one of our three sites experienced elevated latency for connections. This led to a sustained period of timed-out requests across a number of services, including but not limited to our Git backend. An average of 5% and max of 10% of requests failed with a 5xx response or timed out during this period.

  This was caused by an upgrade of hosts, which led to temporarily reduced capacity as the upgrade rolled through the fleet. While these hosts had plenty of capacity to handle the increased load, we found that the configured connection limit was lower than it should have been. We have increased that limit to prevent this from recurring. We have also identified improvements to our monitoring of connection limits and behavior and changes to reduce the risk of host upgrades leading to reduced capacity.

  January 21 02:01 UTC (lasting 7 hours 3 minutes)

  On January 21 at 2:01 UTC, we experienced an incident that affected customers using GitHub Codespaces. Customers encountered issues creating and resuming Codespaces in multiple regions due to operational issues with compute and storage resources.

  Around 25% of customers were impacted, primarily in East US and West Europe. We re-routed traffic for Codespace creations to less impacted regions, but existing Codespaces in these regions may have been unable to resume during the incident.

  By 7:30 UTC, we had recovered connectivity to all regions except West Europe, which had an extended recovery time due to increased load in that particular region. The incident was resolved on January 21 at 9:34 UTC once Codespace creations and resumes were working normally in all regions.

  We are working to improve our alerting and resiliency to reduce the duration and impact of region-specific outages.

  January 31 12:30 UTC (lasting 147 minutes)

  On January 31, we deployed an infrastructure change to our load balancers in preparation towards our longer term goal of IPv6 enablement at GitHub.com. This change was deployed to a subset of our global edge sites. The change had the unintended consequence of causing IPv4 addresses to start being passed as an IPv4-mapped IPv6-compatible address (for example, 10.1.2.3 became ::ffff:10.1.2.3) to our IP Allow List functionality. While our IP Allow List functionality was developed with IPv6 in mind, it wasn’t developed to handle these mapped addresses, and hence, started blocking requests as it deemed these to be not in the defined list of allowed addresses. Request error rates peaked at 0.23% of all requests.

  In addition to changes deployed to remediate the issues, we have taken steps to improve testing and monitoring to better catch these issues in the future.

  ---

  Please follow our status page for real-time updates on status changes and post-incident recaps. To learn more about what we’re working on, check out the GitHub Engineering Blog.

  The post GitHub Availability Report: January 2024 appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-02-14-github-availability-report-january-2024/
• 

  Fixing security vulnerabilities with AI
  • sorangutan  

  1
  1
  Posts
  4
  Views

  

  In November 2023, we announced the launch of code scanning autofix, leveraging AI to suggest fixes for security vulnerabilities in users’ codebases. This post describes how autofix works under the hood, as well as the evaluation framework we use for testing and iteration.

  What is code scanning autofix?

  GitHub code scanning analyzes the code in a repository to find security vulnerabilities and other errors. Scans can be triggered on a schedule or upon specified events, such as pushing to a branch or opening a pull request. When a problem is identified, an alert is presented to the user. Code scanning can be used with first- or third-party alerting tools, including open source and private tools. GitHub provides a first party alerting tool powered by CodeQL, our semantic code analysis engine, which allows querying of a codebase as though it were data. Our in-house security experts have developed a rich set of queries to detect security vulnerabilities across a host of popular languages and frameworks. Building on top of this detection capability, code scanning autofix takes security a step further, by suggesting AI-generated fixes for alerts. In its first iteration, autofix is enabled for CodeQL alerts detected in a pull request, beginning with JavaScript and TypeScript alerts. It explains the problem and its fix strategy in natural language, displays the suggested fix directly in the pull request page, and allows the developer to commit, dismiss, or edit the suggestion.

  The basic idea behind autofix is simple: when a code analysis tool such as CodeQL detects a problem, we send the affected code and a description of the problem to a large language model (LLM), asking it to suggest code edits that will fix the problem without changing the functionality of the code. The following sections delve into some of the details and subtleties of constructing the LLM prompt, processing the model’s response, evaluating the quality of the feature, and serving it to our users.

  The autofix prompt

  At the core of our technology lies a request to an LLM, expressed through an LLM prompt. CodeQL static analysis detects a vulnerability, generating an alert that references the problematic code location as well as any other relevant locations. For example, for a SQL-injection vulnerability, the alert flags the location where tainted data is used to build a database query, and also includes one or more flow paths showing how untrusted data may reach this location without sanitization. We extract information from the alert to construct an LLM prompt consisting of:

  • General information about this type of vulnerability, typically including a general example of the vulnerability and how to fix it, extracted from the CodeQL query help.
  • The source-code location and content of the alert message.
  • Relevant code snippets from the locations all along the flow path and any code locations referenced in the alert message.
  • Specification of the response we expect.

  We then ask the model to show us how to edit the code to fix the vulnerability.

  We describe a strict format for the model output, to allow for automated processing. The model outputs Markdown consisting of the following sections:

  1. Detailed natural language instructions for fixing the vulnerability.
  2. A full specification of the needed code edits, following the format defined in the prompt.
  3. A list of dependencies that should be added to the project, if applicable. This is needed, for example, if the fix makes use of a third-party sanitization library on which the project does not already depend.

  We surface the natural language explanation to users together with the code scanning alert, followed by a diff patch constructed from the code edits and added dependencies. Users can review the suggested fix, edit and adjust it if necessary, and apply it as a commit in their pull request.

  Pre- and post-processing

  If our goal were to produce a nice demo, this simple setup would suffice. Supporting real-world complexity and overcoming LLM limitations, however, requires a combination of careful prompt crafting and post-processing heuristics. A full description of our approach is beyond the scope of this post, but we outline some of the more impactful aspects below.

  Selecting code to show the model

  CodeQL alerts include location information for the alert and sometimes steps along the data flow path from the source to the sink. Sometimes additional source-code locations are referenced in the alert message. Any of these locations may require edits to fix the vulnerability. Further parts of the codebase, such as the test suite, may also need edits, but we focus on the most likely candidates due to prompt length constraints.

  For each of these code locations, we use a set of heuristics to select a surrounding region that provides the needed context while minimizing lines of code, eliding less relevant parts as needed to achieve the target length. The region is designed to include the imports and definitions at the top of the file, as these often need to be augmented in the fix suggestion. When multiple locations from the CodeQL alert reside in the same file, we structure a combined code snippet that gives the needed context for all of them.

  The result is a set of one or more code snippets, potentially from multiple source-code files, showing the model the parts of the project where edits are most likely to be needed, with line numbers added so as to allow reference to specific lines both in the model prompt and in the model response. To prevent fabrications, we explicitly constrain the model to make edits only to the code included in the prompt.

  Adding dependencies

  Some fixes require adding a new project dependency, such as a data sanitation library. To do so, we need to find the configuration file(s) that list project dependencies, determine whether the needed packages are already included, and if not make the needed additions. We could use an LLM for all these steps, but this would require showing the LLM the list of files in the codebase as well as the contents of the relevant ones. This would increase both the number of model calls and the number of prompt tokens. Instead, we simply ask the model to list external dependencies used in its fix. We implement language-specific heuristics to locate the relevant configuration file, parse it to determine whether the needed dependencies already exist, and if not add the needed edits to the diff patch we produce.

  Specifying a format for code edits

  We need a compact format for the model to specify code edits. The most obvious choice would be asking the model to output a standard diff patch directly. Unfortunately, experimentation shows that this approach exacerbates the model’s known difficulties with arithmetic, often yielding incorrect line number computations without enough code context to make heuristic corrections. We experimented with several alternatives, including defining a fixed set of line edit commands the model can use. The approach that yielded the best results in practice involves allowing the model to provide “before” and “after” code blocks, demonstrating the snippets that require changes (including some surrounding context lines) and the edits to be made.

  Overcoming model errors

  We employ a variety of post-processing heuristics to detect and correct small errors in the model output. For example, “before” code blocks might not exactly match the original source-code, and line numbers may be slightly off. We implement a fuzzy search to match the original code, overcoming and correcting errors in indentation, semicolons, code comments, and the like. We use a parser to check for syntax errors in the edited code. We also implement semantic checks such as name-resolution checks and type checks. If we detect errors we are unable to fix heuristically, we flag the suggested edit as (partially) incorrect. In cases where the model suggests new dependencies to add to the project, we verify that these packages exist in the ecosystem’s package registry and check for known security vulnerabilities or malicious packages.

  Evaluation and iteration

  To make iterative improvements to our prompts and heuristics while at the same time minimizing LLM compute costs, we need to evaluate fix suggestions at scale. In taking autofix from demo quality to production quality, we relied on an extensive automated test harness to enable fast evaluation and iteration.

  The first component of the test harness is a data collection pipeline that processes open source repositories with code scanning alerts, collecting alerts that have test coverage for the alert location. For JavaScript / TypeScript, the first supported languages, we collected over 1,400 alerts with test coverage from 63 CodeQL queries.

  The second component of the test harness is a GitHub Actions workflow that runs autofix on each alert in the evaluation set. After committing the generated fix in a fork, the workflow runs both CodeQL and the repository’s test suite to evaluate the validity of the fix. In particular, a fix is considered successful only if:

  • It removes the CodeQL alert.
  • It introduces no new CodeQL alerts.
  • It produces no syntax errors.
  • It does not change the outcome of any of the repository tests.

  As we iterated on the prompt, the code edit format, and various post-processing heuristics, we made use of this test harness to ensure that our changes were improving our success rate. We coupled the automated evaluations with periodic manual triage, to focus our efforts on the most prevalent problems, as well as to validate the accuracy of the automated framework. This rigorous approach to data-driven development allowed us to triple our success rate while at the same time reducing LLM compute requirements by a factor of six.

  Architecture, infrastructure, and user experience

  Generating useful fixes is a first step, but surfacing them to our users requires further front- and back-end modifications. Designing for simplicity, we’ve built autofix on top of existing functionality wherever possible. The user experience enhances the code scanning pull request experience. Along with a code scanning alert, users can now see a suggested fix, which may include suggested changes in multiple files, optionally outside the scope of the pull request diff. A natural language explanation of the fix is also displayed. Users can commit the suggested fixes directly to the pull request, or edit the suggestions in their local IDE or in a GitHub Codespace.

  The backend, too, is built on top of existing code scanning infrastructure, making it seamless for our users. Customers do not need to make any changes to their code scanning workflows to see fix suggestions for supported CodeQL queries.

  

  The user opens a pull request or pushes a commit. Code scanning runs as usual, as part of an actions workflow or workflow in a third-party CI system, uploading the results in the SARIF format to the code scanning API. The code scanning backend service checks whether the results are for a supported language. If so, it runs the fix generator as a CLI tool. The fix generator leverages the SARIF alert data, augmented with relevant pieces of source-code from the repository, to craft a prompt for the LLM. It calls the LLM via an authenticated API call to an internally-deployed API running LLMs on Azure. The LLM response is run through a filtering system which helps prevent certain classes of harmful responses. The fix generator then post-processes the LLM response to produce a fix suggestion. The code scanning backend stores the resulting suggestion, making it available for rendering alongside the alert in pull request views. Suggestions are cached for reuse where possible, reducing LLM compute requirements.

  As with all GitHub products, we followed standard and internal security procedures, and put our architectural design through a rigorous security and privacy review process to safeguard our users. We also took precautions against AI-specific risks such as prompt injection attacks. While software security can never be fully guaranteed, we conducted red team testing to stress-test our model response filters and other safety mechanisms, assessing risks related to security, harmful content, and model bias.

  Telemetry and monitoring

  Before launching autofix, we wanted to ensure that we could monitor performance and measure its impact in the wild. We don’t collect the prompt or the model responses because these may contain private user code. Instead, we collect anonymized, aggregated telemetry on user interactions with suggested fixes, such as the percentage of alerts for which a fix suggestion was generated, the percentage of suggestions that were committed as-is to the branch, the percentage of suggestions that were applied through the GitHub CLI or Codespace, the percentage of suggestions that were dismissed, and the fix rate for alerts with suggestions versus alerts without. As we onboard more users onto the beta program, we’ll look at this telemetry to understand the usefulness of our suggestions.

  Additionally, we’re monitoring the service for errors, such as overloading of the Azure model API or triggering of the filters that block harmful content. Before expanding autofix to unlimited public beta and eventually general availability, we want to ensure a consistent, stable user experience.

  What’s next?

  As we roll out the code scanning autofix beta to an increasing number of users, we’re collecting feedback, fixing papercuts, and monitoring metrics to ensure that our suggestions are in fact useful for security vulnerabilities in the wild. In parallel, we’re expanding autofix to more languages and use cases, and improving the user experience. If you want to join the public beta, sign up here. Keep an eye out for more updates soon!

  Harness the power of CodeQL. Get started now.

  The post Fixing security vulnerabilities with AI appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-02-14-fixing-security-vulnerabilities-with-ai/
• 

  Bringing npm registry services to GitHub Codespaces
  • sorangutan  

  1
  1
  Posts
  6
  Views

  

  The npm engineering team recently transitioned to using GitHub Codespaces for local development for npm registry services. This shift to Codespaces has substantially reduced the friction of our inner development loop and boosted developer productivity. In this post, we would like to share our experiences and learnings from this transition, hoping this information may be useful to you.

  What are npm registry services

  npm registry services, the Node.js microservices that power the npm registry, are distributed across 30+ different repositories. Each microservice has its own repository and is containerized using Docker. With Codespaces, we develop npm registry services using Docker on Codespaces with Visual Studio Code.

  Codespaces reduces the friction of inner dev loop

  Prior to Codespaces, a significant hurdle in npm local development was the difficulty in testing code across multiple services. We lacked a straightforward way to run multiple registry services locally, instead relying on our staging environment for testing. For example, to verify a code change in one service that affected a user workflow involving five other services, we could only run that service locally and connect to the remaining five in the staging environment. Due to security reasons, access to our staging environment is only possible via a VPN, adding another layer of complexity to the code testing process.

  Codespaces addressed this issue by simplifying the process of running multiple registry services locally. When working in a codespace we no longer need a VPN connection for the inner dev loop. This change spares the team from potential issues related to VPN connectivity, and significantly simplifies the process of getting started.

  As developers, we often rely on breakpoints for debugging. Now, with all registry services running within a single workspace, we can debug code and hit breakpoints across multiple services in Visual Studio Code as if they were one service. This is a significant improvement over previous developer experience, where hitting breakpoints in the services within the staging environment was not possible.

  Codespaces boosts developer productivity

  Codespaces has made it easier for outside contributors to participate. For example, if a GitHub engineer outside of the npm team wishes to contribute, they can get started within minutes with Codespaces, as the development environment is pre-configured and ready to go. Previously, setting up the development environment and granting permissions to access the staging resources would take days and often resulted in partners from other teams like design simply not contributing.

  Port forwarding gives us access to TCP ports running within a codespace. Automatic port forwarding in Codespaces allows us to access services from a browser on our local machine for testing and debugging.

  The in browser Codespaces experience, powered by Visual Studio Code for the Web, offers the flexibility to work from any computer. This is particularly helpful when you are away from your primary work computer, but need to test a quick change. The Web-based Codespaces experience provides a zero-install experience running entirely in your browser.

  Remember those times when you were bogged down with a local environment issue that was not only time-consuming to troubleshoot but also difficult to reproduce on other machines? With Codespaces, you can quickly spin up a new Codespaces instance within minutes for a fresh start. The best part? There’s no need to fix the issue; you can simply discard the old codespace.

  Things we learned from our use of Codespaces

  Codespaces has tons of features to save you time and automate processes. Here are a few tips we learned from our use of Codespaces.

  The prebuild feature of Codespaces is an excellent way to speed up the creation of a new codespace by creating a snapshot of your devcontainer and caching all the cloned repositories that can be used at startup time for the codespace. Codespaces prebuilds enable you to select branches and leverage GitHub Actions for automatic updates of these prebuilds.

  You can store account-specific development secrets, such as access tokens, in Codespaces on a per-repository basis, ensuring secure usage within Codespaces. Those secrets are available as environment variables in your environment.

  Another tip is specific to the Visual Studio Code Dev Container. Consider utilizing the Dev Container’s lifecycle events (such as postCreateCommand in devcontainer.json) to automate the Codespaces setup as much as possible. Ultimately, it’s a balance between time saved through automation and time invested in building and maintaining it. However, automation typically results in greater time savings because everyone who uses the configuration benefits.

  Another trick is to use GitHub dotfiles to personalize your Codespaces. Dotfiles are files and folders on Unix-like systems starting with . that control the configuration of applications and shells on your system. You can use GitHub dotfiles to set up your personalized settings in Codespaces.

  Conclusion

  The adoption of GitHub Codespaces has substantially improved the developer experience of working on npm registry services. It has not only reduced the development environment setup time from hours to minutes but also facilitated better debugging experiences. Furthermore, it provides time-saving features like prebuilds. We hope this blog post offers valuable insights into our use of Codespaces. For more information, please refer to Codespaces documentation.

  Harness the power of Codespaces. Learn more or get started now.

  The post Bringing npm registry services to GitHub Codespaces appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-02-13-bringing-npm-registry-services-to-github-codespaces/
• 

  GitHub’s Engineering Fundamentals program: How we deliver on availability, security, and accessibility
  • sorangutan  

  1
  1
  Posts
  8
  Views

  

  How do we ensure over 100 million users across the world have uninterrupted access to GitHub’s products and services on a platform that is always available, secure and accessible? From our beginnings as a platform for open source to now also supporting 90% of the Fortune 100, that is the ongoing challenge we face and hold ourselves accountable for delivering across our engineering organization.

  Establishing engineering governance

  To meet the needs of our increased number of enterprise customers and our continuing innovation across the GitHub platform, we needed to address tech debt, improve reliability, and enhance observability of our engineering systems. This led to the birth of GitHub’s engineering governance program called the Fundamentals program. Our goal was to work cross-functionally to define, measure, and sustain engineering excellence with a vision to ensure our products and services are built right for all users.

  What is the Fundamentals program?

  In order for such a large-scale program to be successful, we needed to tackle not only the processes but also influence GitHub’s engineering culture. The Fundamentals program helps the company continue to build trust and lead the industry in engineering excellence, by ensuring that there is clear prioritization of the work needed in order for us to guarantee the success of our platform and the products that you love.

  We do this via the lens of three program pillars, which help our organization understand the focus areas that we emphasize today:

  1. Accessibility (A11Y): Truly be the home for all developers
  2. Security: Serve as the most trustworthy platform for developers
  3. Availability: Always be available and on for developers

  In order for this to be successful, we’ve relied on both grass-roots support from individual teams and strong and consistent sponsorship from our engineering leadership. In addition, it requires meaningful investment in the tools and processes to make it easy for engineers to measure progress against their goals. No one in this industry loves manual processes and here at GitHub we understand anything that is done more than once must be automated to the best of our ability.

  How do we measure progress?

  We use Fundamental Scorecards to measure progress against our Availability, Security, and Accessibility goals across the engineering organization. The scorecards are designed to let us know that a particular service or feature in GitHub has reached some expected level of performance against our standards. Scorecards align to the fundamentals pillars. For example, the secret scanning scorecard aligns to the Security pillar, Durable Ownership aligns to Availability, etc. These are iteratively evolved by enhancing or adding requirements to ensure our services are meeting our customer’s changing needs. We expect that some scorecards will eventually become concrete technical controls such that any deviation is treated as an incident and other automated safety and security measures may be taken, such as freezing deployments for a particular service until the issue is resolved.

  Each service has a set of attributes that are captured and strictly maintained in a YAML file, such as a service tier (tier 0 to 3 based on criticality to business), quality of service (QoS values include critical, best effort, maintenance and so on based on the service tier), and service type that lives right in the service’s repo. In addition, this file also has the ownership information of the service, such as the sponsor, team name, and contact information. The Fundamental scorecards read the service’s YAML file and start monitoring the applicable services based on their attributes. If the service does not meet the requirements of the applicable Fundamental scorecard, an action item is generated with an SLA for effective resolution. A corresponding issue is automatically generated in the service’s repository to seamlessly tie into the developer’s workflow and meet them where they are to make it easy to find and resolve the unmet fundamental action items.

  Through the successful implementation of the Fundamentals program, we have effectively managed several scorecards that align with our Availability, Security, and Accessibility goals, including:

  • Durable ownership: maintains ownership of software assets and ensures communication channels are defined. Adherence to this fundamental supports GitHub’s Availability and Security.
  • Code scanning: tracks security vulnerabilities in GitHub software and uses CodeQL to detect vulnerabilities during development. Adherence to this fundamental supports GitHub’s Security.
  • Secret scanning: tracks secrets in GitHub’s repositories to mitigate risks. Adherence to this fundamental supports GitHub’s Security.
  • Incident readiness: ensures services are configured to alert owners, determine incident cause, and guide on-call engineers. Adherence to this fundamental supports GitHub’s Availability.
  • Accessibility: ensures products and services follow our accessibility standards. Adherence to this fundamental enables developers with disabilities to build on GitHub.

  Example secret scanning scorecard

  A culture of accountability

  As much emphasis as we put on Fundamentals, it’s not the only thing we do: we ship products, too!

  We call it the Fundamentals program because we also make sure that:

  1. We include Fundamentals in our strategic plans. This means our organization prioritizes this work and allocates resources to accomplish the fundamental goals we each quarter. We track the goals on a weekly basis and address the roadblocks.
  2. We surface and manage risks across all services to the leaders so they can actively address them before they materialize into actual problems.
  3. We provide support to teams as they work to mitigate fundamental action items.
  4. It’s clearly understood that all services, regardless of team, have a consistent set of requirements from Fundamentals.

  Planning, managing, and executing fundamentals is a team affair, with a program management umbrella.

  Designated Fundamentals champions and delegates help maintain scorecard compliance, and our regular check-ins with engineering leaders help us identify high-risk services and commit to actions that will bring them back into compliance. This includes:

  1. Executive sponsor. The executive sponsor is a senior leader who supports the program by providing resources, guidance, and strategic direction.
  2. Pillar sponsor. The pillar sponsor is an engineering leader who oversees the overarching focus of a given pillar across the organization as in Availability, Security, and Accessibility.
  3. Directly responsible individual (DRI). The DRI is an individual responsible for driving the program by collaborating across the organization to make the right decisions, determine the focus, and set the tempo of the program.
  4. Scorecard champion. The scorecard champion is an individual responsible for the maintenance of the scorecard. They add, update, and deprecate the scorecard requirements to keep the scorecard relevant.
  5. Service sponsors. The sponsor oversees the teams that maintain services and is accountable for the health of the service(s).
  6. Fundamentals delegate. The delegate is responsible for coordinating Fundamentals work with the service owners within their org, supporting the Sponsor to ensure the work is prioritized, and resources committed so that it gets completed.

  Results-driven execution

  Making the data readily available is a critical part of the puzzle. We created a Fundamentals dashboard that shows all the services with unmet scorecards sorted by service tier and type and filtered by service owners and teams. This makes it easier for our engineering leaders and delegates to monitor and take action towards Fundamental scorecards’ adherence within their orgs.

  As a result:

  • Our services comply with durable ownership requirements. For example, the service must have an executive sponsor, a team, and a communication channel on Slack as part of the requirements.
  • We resolved active secret scanning alerts in repositories affiliated with the services in the GitHub organization. Some of the repositories were 15 years old and as a part of this effort we ensured that these repos are durably owned.
  • Business critical services are held to greater incident readiness standards that are constantly evolving to support our customers.
  • Service tiers are audited and accurately updated so that critical services are held to the highest standards.

  Example layout and contents of Fundamentals dashboard

  Tier 1 Services Out of Compliance [Count: 2]
  Service Name	Service Tier	Unmet Scorecard	Exec Sponsor	Team
  service_a	1	incident-readiness	john_doe	github/team_a
  service_x	1	code-scanning	jane_doe	github/team_x

  Continuous monitoring and iterative enhancement for long-term success

  By setting standards for engineering excellence and providing pathways to meet through standards through culture and process, GitHub’s Fundamentals program has delivered business critical improvements within the engineering organization and, as a by-product, to the GitHub platform. This success was possible by setting the right organizational priorities and committing to them. We keep all levels of the organization engaged and involved. Most importantly, we celebrate the wins publicly, however small they may seem. Building the culture of collaboration, support, and true partnership has been key to sustaining the ongoing momentum of an organization-wide engineering governance program, and the scorecards that monitor the availability, security, and accessibility of our platform so you can consistently rely on us to achieve your goals.

  Want to learn more about how we do engineering GitHub? Check out how we build containerized services, how we’ve scaled our CI to 15,000 jobs every hour using GitHub Actions larger runners, and how we communicate effectively across time zones, teams, and tools.

  Interested in joining GitHub? Check out our open positions or learn more about our platform.

  The post GitHub’s Engineering Fundamentals program: How we deliver on availability, security, and accessibility appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-02-08-githubs-engineering-fundamentals-program-how-we-deliver-on-availability-security-and-accessibility/
• 

  How GitHub’s Developer Experience team improved innerloop development
  • sorangutan  

  1
  1
  Posts
  15
  Views

  

  Building confidence in new code before deploying is a crucial part of any good development loop. This is especially challenging when working in a distributed or microservice system with multiple teams operating on different services. This modular team structure gives rise to an important question: how can we provide teams with fast and reliable development cycles when testing and shipping requires them to test inside an ecosystem of other services? Optimizing the solution to this problem greatly improves engineering efficiency and can contribute to more successful outcomes for the organization as a whole.

  This problem is one the Developer Experience (DX) team at GitHub grappled with again and again, ultimately delivering a solution we call “Hubber Codespace” (HCS). HCS is a tool that Hubbers (people who work at GitHub) can use to locally stand up the entire distributed GitHub ecosystem in any environment by simply querying an endpoint or adding a couple lines of configuration to their development containers.

  In this post, we’ll tell you how we landed on the HCS solution to this common problem over some possible alternatives, and you’ll get a first-hand look at how GitHub’s developer-first mindset helped us deliver the best tool for Hubbers to ship code quickly and safely in our own distributed environment.

  One big (un)-happy environment

  To understand the problem we were trying to solve, we have to go back in time. There was a point at which GitHub was just a couple teams and a much simpler product. Back then, having a monorepo in which everyone iterated and built confidence in their changes made sense. Splitting responsibilities up across repositories would have added overhead that bogged down early Hubbers. Fast forward to today, and GitHub has grown into a big organization with hundreds of different teams. Now, the balancing act of evaluating between velocity vs. complexity can look very different.

  Let’s consider these complexities a bit further. Different services can have entirely different sets of dependencies and even have dependencies on different versions of the same software (for example, one service requires Ruby 2.2 while another requires Ruby 2.4). In smaller collaborative settings, the engineers can easily reconcile these needs. But this complexity grows exponentially as more teams are introduced. Trying to provide a single environment in which these kinds of disparate services can run and interact in development becomes difficult to do. It can result in ad-hoc “hacks” in development loops like deleting a .ruby-version file depending on which service’s development loop you’re working through. These are the kinds of problems that you encounter when trying to work with a monorepo that contains the codebases for a set of disparate services.

  So, we decided to design a new solution. Instead of bringing the developers to the ecosystem, what if we brought the ecosystem to the developers?

  Enter HCS

  This line of thinking led us to build HCS, a Docker-Compose project that does exactly that. Building containerized services at GitHub using GitHub details how we build containerized services that power microservices on the GitHub.com platform and many internal tools. Our task now was to take these containers and wire them up such that partner teams could spin up a full GitHub ecosystem on demand. This would allow them to test their changes in an integrated environment. Developers could see how their code behaves when introduced to GitHub’s distributed system, rather than only observing it in the isolated environment of the application being developed before deploying within the full system. In this way, developers could gain confidence that the services they were changing behaved correctly when interacting with their up and downstream dependencies.

  When considering how to orchestrate all the required containers, a few solutions came to mind: Docker-Compose, an internal tool called Codespace-Compose that allows us to SSH tunnel between multiple codespaces, and Minikube. Any of these three solutions could solve the ecosystem problem and would have unique tradeoffs. Let’s look at some of those tradeoffs now.

  Minikube offers a robust Kubernetes architecture, but we had concerns about the overall user experience. We ultimately decided against it as the issues we identified, such as networking complexity and long cycle times, could bog down development speed.

  Codespace-Compose allows us to easily connect teams’ everyday development environments, but we reasoned that, since Codespace-Compose is an internal experiment without any SLA, we’d incur a maintenance cost on our own team by adopting this.

  Docker-Compose seemed to fit our needs the best. It didn’t incur any additional maintenance burden since it’s publicly available and actively managed. It offers all the same benefits of Minikube without the long cycle time. Most importantly, using docker in docker in a codespace, which allows us to create docker containers on a host which is a docker container itself, is a well-paved path that has lots of prior art. Given all these considerations, we decided on orchestrating our containers using Docker-Compose.

  After deciding on Docker-Compose as our orchestrator, the next steps were to figure out the interface. Docker-Compose already supplies end users with commands, but we wanted to optimize the UX around HCS. To do this, we built a user-friendly CLI in Golang with parallel versioning to HCS. This abstracted away all the complexity of using the two together. Simply download a specific release version for HCS, get the same version of the CLI binary, and you’re good to go!

  CLI and release automation

  Ensuring HCS is useful means ensuring a couple of things. One important goal is ease of use. Docker-Compose already offers an interface for end users, but considering some of the built in commands are long and use predictable options, we decided to wrap it in a custom Golang CLI. This abstracted many of the underlying details away, such as static file locations, formatting options, entrypoint commands, etc. to improve end-user experience. The code below shows this by juxtaposing the Docker-Compose commands with their equivalent HCS CLI command.

  The following example compares the commands to start up the integrated environment provided by HCS.

  
  # Start using Docker-Compose
  docker compose --project-name hcs \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-actions.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-base.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-bg.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-core.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-volume.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-test.yml \
  --file /workspaces/hubber-codespace-dist/docker-compose-hcs-vendor.yml \
  --profile full up -d --remove-orphans
  
  # Start using CLI
  hcs start
  
  

  This next example compares how to get a shell to run commands from inside the various containers in GitHub’s distributed ecosystem. This allows developers to modularly interact with and make ephemeral changes to the system.

  
  # Run command from inside a container in the system using Docker-Compose
  
  docker compose --project-name hcs exec bash
  
  # Run from inside a container using CLI
  
  hcs shell
  
  

  This example compares how to check the status of the containers in the project so end-users can easily see the health of the entire system.

  
  # Status using Docker-Compose
  
  docker compose --project-name hcs ps --format json
  
  # Status using CLI
  
  hcs status
  
  

  In addition to this easy-to-use and ergonomic CLI, we had to ensure that HCS runs an up-to-date version of the GitHub ecosystem. GitHub is made up of so many different moving pieces that testing new changes on code that’s even a couple days old would not be sufficient to build confidence. When iterating directly on the monorepo, this was a non-issue since folks just fetched the main branch. For HCS, this required us to build automation that cuts releases on a frequent cron schedule. A release of HCS is a software artifact containing the compiled Golang binary for HCS and its CLI that can be pulled using the gh CLI.

  The diagram below illustrates how this process works.

  

  End-user experience

  Using HCS directly in your codespace

  We’ve recently made efforts to push all development at GitHub onto GitHub Codespaces. A codespace is a custom development container, or devcontainer, based on a configuration file in a repository. A repository can have multiple codespaces associated with it as long as each has a unique configuration file. On top of the obvious benefits of having a reproducible environment on demand to develop and iterate in, devcontainers offer features. This abstraction allows developers to easily add software to their environments. HCS is also consumable this way. The code block below shows the couple lines needed to bring this entire ecosystem to a partner team’s preferred environment (that is, their codespace).

  {
  …
    "features": {
      …
      "ghcr.io/devcontainers/features/github-cli:1": {
        "version": "latest"
      },
      //docker-in-docker required for hcs
      "ghcr.io/devcontainers/features/docker-in-docker:2": {},
      // Include the hubber-codespace feature
      "ghcr.io/github/hubber-codespace/hcs:1": {},
      "ghcr.io/devcontainers/features/go:1": {}
      …
    }
  }
  

  Now, teams can perform integration testing against the many other services in GitHub’s ecosystem from directly in the codespace where they were doing local development.

  Release binary

  Even with the push towards codespaces, not every context that requires an ecosystem will be a devcontainer. In light of this, we also gave end users the option to download the release directly from the GitHub API. The commands to do so can be seen below. With a couple simple commands, Hubbers now have everything they need to bring the entire GitHub ecosystem to whatever environment they want.

  
  gh release download --repo github/hubber-codespace  -p hcs -D /tmp/
  
  chmod +x /tmp/hcs
  
  sudo mv /tmp/hcs /usr/local/bin
  
  hcs init
  
  hcs pull
  
  hcs start
  
  

  Testimonials

  But don’t just take my word for it. Check out what our partner teams have had to say about HCS improving their development loop:

  “HCS has improved our dev loop for [our service] by making it simple to test [it] against [the rest of GitHub’s ecosystem]. It’s turned what used to be a number of manual steps to clone our repository into the [monorepo environment] into two simple commands in our own codespace. This has made it much easier to validate our changes without having to deploy to a staging environment.”

  “Given that we are a service operating outside GitHub but with a heavy reliance on the services running within GitHub, we’ve had to go through a lot of bells and whistles to ensure we can have a smooth development experience. In my four years working on [our service], HCS has been the most seamless experience in going from a blank devbox to breakpointing live running code for our service.”

  Conclusion

  Solving the ecosystem problem is always a balancing act. Luckily, thanks to GitHub’s push towards containerization, and tooling such as repository automation and publishing/consuming releases through the GitHub CLI, we were adequately equipped to develop a solution with HCS. Hubbers can now leverage a development loop that allows them to deploy with confidence, having tested their changes within GitHub’s complex multi-service system.

  The post How GitHub’s Developer Experience team improved innerloop development appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-01-24-how-githubs-developer-experience-team-improved-innerloop-development/
• 

  How to get in the flow while coding (and why it’s important)
  • sorangutan  

  1
  1
  Posts
  7
  Views

  

  It’s the dream: your ideas are flowing, time and space fade away, the path ahead of you is clear, you’re moving at the speed of thought, and every click you make is gold.

  This is called being in the flow or flow state. When you’re in the flow, you block out the world, are fully immersed in what you’re doing, and enjoy increased creativity, innovation, and happiness.

  “Being in the flow is magical,” says Jonathan Carter, technical advisor of the CEO at GitHub. “You tell your teammates they can go to lunch and you’ll catch them later—not because you’re a workaholic, but because there’s truly nothing else you’d rather be doing right now.”

  In this blog, we’ll explore what flow state entails, its benefits, and three tips for reaching it the next time you sit down to code. Let’s go.

  What exactly is the flow state?

  The concept of flow state came from positive psychologist Mihaly Csikszentmihalyi and his 1990 book, Flow: The Psychology of Optimal Experience. In it, Csikszentmihalyi describes nine dimensions of flow:

  1. Challenge-skills balance
  2. Total concentration
  3. Clear goals
  4. Immediate feedback
  5. Transformation of time
  6. Feeling intrinsically rewarded
  7. Effortlessness
  8. Loss of self-consciousness
  9. Feeling of total control

  Csikszentmihalyi discovered these dimensions by conducting research to understand how people achieve productivity and happiness. He found that in people’s favorite, most absorbed moments, their thoughts and actions “flowed,” and brought unrivaled motivation, meaning, and creativity.

  “Software has historically been viewed as mathematical or scientific in nature, but I would argue that writing code has more in common with other creative acts,” says Idan Gazit, senior director of research at GitHub. “Whether you’re writing an essay or writing a program, the challenge is getting into the headspace where you can untangle the thing you want to express.”

  What are the benefits of flow state for developers?

  When developers reach that coveted frame of mind, their productivity soars. According to our recent developer productivity research, developers produce higher quality work when they can easily collaborate—a hallmark of flow state—through comments, pull requests, issues, etc. According to the study, developers reported that effective collaboration provides a host of benefits:

  • Improved test coverage
  • Faster code writing
  • Cleaner code writing
  • More secure code writing
  • Novel solutions
  • Faster code shipping

  On the flip side, when developers can’t freely collaborate, their work suffers (it takes 23 minutes, on average, to get back into the task at hand after an interruption, according to a study from the University of California, Irvine).

  And flow state isn’t important just for individual developers—it helps businesses, too.

  “When it comes to business success, flow state is everything,” says Chris Reddington, senior manager of developer advocacy at GitHub. This is because today’s environments use dozens of languages and often leverage multiple cloud providers, creating pressure, complexity, and distractions. He adds, “The more we can help engineering teams stay in the flow, where they are just focused on solving those bigger problems, the better.”

  Quick tips for developers who want to get and stay in the flow state

  So, how can you achieve flow state during your day-to-day tasks? The following tips should help you reach the flow state and stay there—regardless of industry or where you are in your developer career.

  Tip #1: Optimize your environment

  Creating a distraction-free environment that’s conducive to work can pay huge dividends. Here are some ideas:

  • Block time. Create personal focus events on your calendar where no one can schedule meetings with you.
  • Schedule breaks. Use a timer to give yourself 15-30 minute breaks throughout the workday.
  • Snooze Slack and phone notifications. Be antisocial and make yourself unavailable to the world.
  • Eliminate or reduce multitasking. Being able to do more than one task at a time is a myth, anyway.
  • Invest in headphones. Noise-canceling headphones, in particular, can keep your stress down and your focus high.
  • Get comfortable. Invest in ergonomic office equipment, wear comfortable clothes, and ensure you’ve had enough to eat.
  • Hold on scheduling meetings. If you’re a team leader, be mindful of meeting frequency.
  • Create a pre-flow ritual. Routines like grabbing coffee, checking your messages, and then putting your phone on silent can cue your brain that it’s time to get to work.

  Of course, even with our best attempts, distractions happen. If you need to step away from the task at hand, that’s okay. Gazit also suggests pair programming or solution design to help overcome mental hurdles.

  “It’s a great magic trick,” he says. “Stepping back and talking through the problem with a teammate is often the fastest route to getting unstuck.”

  He also adds that GitHub Copilot can be helpful for this.

  “GitHub Copilot is never busy,” he says. “I’m not distracting it when I put it to work. Debugging with a rubber duck is fantastic, but GitHub Copilot is the rubber duck that talks back. It helps me reason about the solution space and suggests approaches I wouldn’t have considered.”

  

  Tip #2: Map out your work

  You can also achieve flow state by ensuring you have a clear path for accomplishing your goal.

  Gazit describes how he can get into the flow state when he correctly nails the balance of architectural work. This is especially important when it comes to complex tasks like designing an API, where you first have to build an architecture while considering how it will be used and what kind of load it’ll put on your database.

  “If I do the architectural work well, I can then do the bricklaying with a feeling that I’m super clear on what I’m doing,” he says. “I know exactly where I’m going.”

  Reddington notes that mapping your work and the practice of blocking time, as mentioned above, often go hand in hand.

  “When I block out chunks of time, I can figure out how I’m going to solve the problems I’m tackling appropriately,” he says.

  However, he warns that you’re not always going to fix the things you’re trying to do in the allotted blocked time. But at least you can start mentally organizing.

  Finding the optimal mix of challenge and skill is also important to achieve flow. If something is too easy, you’ll be bored and unsatisfied. If it’s too challenging on the other hand, you’ll be stressed about not not getting it done, which will also keep flow elusive.

  “A good mix can make all the difference,” Reddington says.

  Tip #3: Find joy in the work you’re doing

  You won’t be able to hit flow state if you’re not enjoying yourself.

  “It’s only when you’re not worrying about meetings, or your email, or what you’re going to have for dinner, that you can hit the flow state,” Carter says.

  It’s a similar experience to being entertained.

  “It’s like when you’re reading a book and you just have to finish the next chapter or you’re binging Netflix and you need to see the next episode,” he says. “It’s that same energy.”

  Enjoyable work pertains to teams, too.

  Carter notes that office work enjoyment can be increased by clearly articulating the outcomes you’re trying to accomplish. When a product manager writes a well-articulated issue that clarifies the end result, there’s a higher likelihood that the team will be more motivated to take that work on and do it quickly.

  “They’re not focused on the complexity anymore but on the desire to get there,” he says.

  Similarly, if you’re involved in a project you don’t enjoy, it can be useful to rethink why you’re doing that work in the first place.

  “I find that if I can recreate the mindset of why we should solve the problem, I can bootstrap curiosity and get back into the flow state,” he says.

  The bottom line

  Achieving flow state can significantly enhance norepinephrine, dopamine, anandamide, serotonin, and endorphins—increasing feelings of motivation and intrinsic reward, as well as pattern recognition and lateral thinking ability. It’s a win for productivity, well-being, and keeping the intrinsic developer fire strong.

  “With flow state, you’re never at a point where you’re performing the same mechanics twice,” Carter says. “You’re learning in response to what you’re doing. You’re naturally interested, building up an unconscious muscle of curiosity. The learning potential is endless.”

  To learn more about how businesses are incorporating flow state into their processes, read Developer experience: What is it and why should you care? and explore how GitHub can help.

  The post How to get in the flow while coding (and why it’s important) appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-01-22-how-to-get-in-the-flow-while-coding-and-why-its-important/
• 

  10 unexpected ways to use GitHub Copilot
  • sorangutan  

  1
  1
  Posts
  13
  Views

  

  Writing code is more than just writing code. There’s commit messages to write, CLI commands to execute, and obscure syntax to try to remember. While you’ve probably used GitHub Copilot to support your coding, did you know it can also support your other workloads?

  GitHub Copilot is widely known for its ability to help developers write code in their IDE. Today, I want to show you how the AI assistant’s abilities can extend beyond just code generation. In this post, we’ll explore 10 use cases where GitHub Copilot can help reduce friction during your developer workflow. This includes pull requests, working from the command line, debugging CI/CD workflows, and much more!

  Let’s get into it.

  1. Run terminal commands from GitHub Copilot Chat

  If you ever forget how to run a particular command when you’re working in your VS Code, GitHub Copilot Chat is here to help! With the new @terminal agent in VS Code, you can ask GitHub Copilot how to run a particular command. Once it generates a response, you can then click the “Insert into Terminal” button to run the suggested command.

  Let me show you what I mean:

  The @terminal agent in VS Code also has context about the integrated shell terminal, so it can help you even further.

  2. Write pull request summaries

  We’ve all been there where we made a sizable pull request with tons of files and hundreds of changes. But, sometimes, it can be hard to remember every little detail that we’ve implemented or changed.

  Yet it’s an important part of collaborating with other engineers/developers on my team. After all, if I don’t give them a summary of my proposed changes, I’m not giving them the full context they need to provide an effective review. Thankfully, GitHub Copilot is now integrated into pull requests! This means, with the assistance of AI, you can generate a detailed pull request summary of the changes you made in your files.

  Let’s look at how you can generate these summaries:

  Now, isn’t that grand! All you have to do is go in and edit what was generated and you have a great, detailed explanation of all the changes you’ve made—with links to changed files!

  Learn more about this enterprise feature by reading our documentation.

  3. Generate commit messages

  I came across this one recently while making changes in VS Code. GitHub Copilot can help you generate commit messages right in your IDE. If you click on the source control button, you’ll notice a sparkle in the message input box.

  Click on those sparkles and voilà, commit messages are generated on your behalf:

  I thought this was a pretty nifty feature of GitHub Copilot in VS Code and Visual Studio.

  4. Get help in the terminal with GitHub Copilot in the CLI

  Another way to get help with terminal commands is to use GitHub Copilot in the CLI. This is an extension to GitHub CLI that helps you with general shell commands, Git commands, and gh cli commands.

  GitHub Copilot in the CLI is a game-changer that is super useful for reminding you of commands, teaching you new commands or explaining random commands you come across online.

  Learn how to get started with GitHub Copilot in the CLI by reading this post!

  5. Talk to your repositories on GitHub.com

  If you’ve ever gone to a new repository and have no idea what’s happening even though the README is there, you can now use GitHub Copilot Chat to explain the repository to you, right in GitHub.com. Just click on the Copilot icon in the top right corner of the repository and ask whatever you want to know about that repository.

  On GitHub.com you can ask Copilot general software related questions, questions about the context of your project, questions about a specific file, or specified lines of code within a file. Learn more about this enterprise feature by reading our documentation.

  6. Fix code inline

  Did you know that in addition to asking for suggestions with comments, you can get help with your code inline? Just highlight the code you want to fix, right click, and select “Fix using Copilot.” Copilot will then provide you with a suggested fix for your code.

  This is great to have for those small little fixes we sometimes need right in our current files.

  7. Bulk close 1000+ GitHub Issues

  My team and I had a use case where we needed to close over 1,600 invalid GitHub Issues submitted to one of our repositories. I created a custom GitHub Action that automatically closed all 1,600+ issues and implemented the solution with GitHub Copilot.

  GitHub Copilot Chat helped me to create the GitHub Action, and also helped me implement the closeIssue() function very quickly by leveraging Octokit to grab all the issues that needed to be closed.

  

  You can read all about how I bulk closed 1000+ GitHub issues in this blog post, but just know that with GitHub Copilot Chat, we went from having 1,600+ open issues, to a measly 64 in a matter of minutes.

  8. Generate documentation for your code

  We all love documenting our code, but just in case some of us need a little help writing documentation, GitHub Copilot is here to help!

  Regardless of your language, you can quickly generate documentation following language specific formats—Docstring for Python, JSDoc for Javascript or Javadoc for Java.

  9. Get help with error messages in your terminal

  Error messages can often be confusing. With GitHub Copilot in your IDE, you can now get help with error messages right in the terminal. Just highlight the error message, right click, and select “Explain with Copilot.” GitHub Copilot will then provide you with a description of the error and a suggested fix.

  You can also bring error messages from your browser console into Copilot Chat so it can explain those messages to you as well with the /explain slash command.

  10. Debug your GitHub Actions workflow

  Whenever I have a speaking engagement, I like to create my slides using Slidev, an open source presentation slide builder for developers. I enjoy using it because I can create my slides in Markdown and still make them look splashy! Take a look at this one for example!

  Anyway, there was a point in time where I had an issue with deploying my slides to GitHub Pages and I just couldn’t figure out what the issue was. So, of course, I turned to my trusty assistant—GitHub Copilot Chat that helped me debug my way through deploying my slides.

  

  Read more about how I debugged my deployment workflow with GitHub Copilot Chat here.

  GitHub Copilot goes beyond code completion

  As you see above, GitHub Copilot extends far beyond your editor and code completion. It is truly evolving to be one of the best tools you can have in your developer toolkit. I’m still learning and discovering new ways to integrate GitHub Copilot into my daily workflow and I hope you give some of the above a chance!

  Be sure to sign up for Github Copilot if you haven’t tried it out yet and stay up to date with all that’s happening by subscribing to our developer newsletter for more tips, technical guides, and best practices! You can also drop me a note on X if you have any questions, @itsthatladydev.

  Until next time, happy coding!

  The post 10 unexpected ways to use GitHub Copilot appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-01-22-10-unexpected-ways-to-use-github-copilot/
• 

  GitHub Availability Report: December 2023
  • sorangutan  

  1
  1
  Posts
  8
  Views

  

  In December, we experienced three incidents that resulted in degraded performance across GitHub services. All three are related to a broad secret rotation initiative in late December. While we have investigated and identified improvements from each of these individual incidents, we are also reviewing broader opportunities to reduce availability risk in our broader secrets management.

  December 27 02:30 UTC (lasting 90 minutes)

  While rotating HMAC secrets between GitHub’s frontend service and an internal service, we triggered a bug in how we fetch keys from Azure Key Vault. API calls between the two services started failing when we disabled a key in Key Vault while rolling back a rotation in response to an alert.

  This resulted in all codespace creations failing between 02:30 and 04:00 UTC on December 27 and approximately 15% of resumes to fail as well as other background functions. We temporarily re-enabled the key in Key Vault to mitigate the impact before deploying a change to continue the secret rotation. The original alert turned out to be a separate issue that was not customer-impacting and was fixed immediately after the incident.

  Learning from this, the team has improved the existing playbooks for HMAC key rotation and documentation of our Azure Key Vault implementation.

  December 28 05:52 UTC (lasting 65 minutes)

  Between 5:52 UTC and 6:47 UTC on December 28, certain GitHub email notifications were not sent due to failed authentication between backend services that generate notifications and a subset of our SMTP servers. This primarily impacted CI activity and Gist email notifications.

  This was caused by the rotation of authentication credentials between frontend and internal services that resulted in the SMTP servers not being correctly updated with the new credentials. This triggered an alert for one of the two impacted notifications services within minutes of the secret rotation. On-call engineers discovered the incorrect authentication update on the SMTP servers and applied changes to update it, which mitigated the impact.

  Repair items have already been completed to update the relevant secrets rotation playbooks and documentation. While the monitor that did fire was sufficient in this case to engage on-call engineers and remediate the incident, we’ve completed an additional repair item to provide earlier alerting across all services moving forward.

  December 29 00:34 UTC (lasting 68 minutes)

  Users were unable to sign in or sign up for new accounts between 00:34 and 1:42 UTC on December 29. Existing sessions were not impacted.

  This was caused by a credential rotation that was not mirrored in our frontend caches, causing the mismatch in behavior between signed in and signed out users. We resolved the incident by deploying the updated credentials to our cache service.

  Repair items are underway to improve our monitoring of signed out user experiences and to better manage updates to shared credentials in our systems moving forward.

  ---

  Please follow our status page for real-time updates on status changes and post-incident recaps. To learn more about what we’re working on, check out the GitHub Engineering Blog.

  The post GitHub Availability Report: December 2023 appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-01-17-github-availability-report-december-2023/
• 

  A developer’s second brain: Reducing complexity through partnership with AI
  • sorangutan  

  1
  1
  Posts
  7
  Views

  

  As adoption of AI tools expands and the technology evolves, so do developers’ expectations and perspectives. Last year, our research showed that letting GitHub Copilot shoulder boring and repetitive work reduced cognitive load, freed up time, and brought delight to developers. A year later, we’ve seen the broad adoption of ChatGPT, an explosion of new and better models, and AI agents are now the talk of the industry. What is the next opportunity to provide value for developers through the use of AI? How do developers feel about working more closely with AI? And how do we integrate AI into workflows in a way that elevates developers’ work and identity?

  The deeper integration of AI in developers’ workflows represents a major change to how they work. At GitHub Next we recently interviewed 25 developers to build a solid qualitative understanding of their perspective. We can’t measure what we don’t understand (or we can measure it wrong), so this qualitative deep dive is essential before we develop metrics and statistics. The clear signal we got about developers’ motivations and openness is already informing our plans, vision, and perspective, and today we are sharing it to inform yours, too. Let’s see what we found!

  Finding 1: Cognitive burden is real, and developers experience it in two ways

  The mentally taxing tasks developers talked about fell into two categories:

  • “This is so tedious”: repetitive, boilerplate, and uninteresting tasks. Developers view these tasks as not worth their time, and therefore, ripe for automation.
  • “This hurts my brain”: challenging yet interesting, fun, and engaging tasks. Developers see these as the core tasks of programming. They call for learning, problem solving and figuring things out, all of which help them grow as engineers.

  AI is already making the tedious work less taxing. Tools like GitHub Copilot are being “a second pair of hands” for developers to speed them through the uninteresting work. They report higher satisfaction from spending more of their energy on interesting work. Achievement unlocked!

  But what about the cognitive burden incurred by tasks that are legitimately complex and interesting? This burden manifests as an overwhelming level of difficulty which can discourage a developer from attempting the task. One of our interviewees described the experience: _“Making you feel like you can’t think and [can’t] be as productive as you would be, and having mental blockers and distractions that prevent you from solving problems.”_That’s not a happy state for developers.

  Even with the advances of the last two years, AI has an opportunity to provide fresh value to developers. The paradigm for AI tools shifts from “a second pair of hands” to “a second brain,” augmenting developers’ thinking, lowering the mental tax of advanced tasks, and helping developers tackle complexity.

  Where do developers stand on partnering with AI to tackle more complex tasks?

  Finding 2: Developers are eager for AI assistance in complex tasks, but we have to get the boundaries right

  The potential value of helping developers with complex tasks is high, but it’s tricky to get right. In contrast to tedious tasks, developers feel a strong attachment to complex or advanced programming tasks. They see themselves as ultimately responsible for solving complex problems. It is through working on these tasks that they learn, provide value, and gain an understanding of large systems, enabling them to maintain and expand those systems. This developer perspective is critical; it influences how open developers are to the involvement of AI in their workflows, and in what ways. And it sets a clear—though open-ended—goal for us to build a good “developer-AI partnership” and figure out how AI can augment developers during complex tasks, without compromising their understanding, learning, or identity.

  Another observation in the interviews was that developers are not expecting perfection from AI today—an answer that perhaps would have been different 12 months ago. What’s more, developers see themselves as supervising and guiding the AI tools to produce the appropriate-for-them output. Today that process can still be frustrating—and at times, counterproductive—but developers’ view this process as paying dividends long-term as developers and AI tools adapt to each other and work in partnership.

  Finding 3: Complex tasks have four parts

  At this point, we have to introduce some nuances to help us think about what the developer-AI partnership and its boundaries might look like. We talk about tasks as whole units of work, but there is a lot that goes on, so let’s give things a bit of structure. We used the following framework that recognizes four parts to a task:

  

  This framework (slightly adapted) comes from earlier research on automation allocation logic and the interface of humans and AI during various tasks. The framework’s history, and the fact that it resonated with all our interviewees, makes us confident that it’s a helpful way to think about complex software development tasks. Developers may not always enjoy such a neatly linear process, but this is a useful mechanism to understand where AI assistance can have the most impact for developers. The question is where are developers facing challenges, and how open they are to input and help from AI.

  Finding 4: Developers are open to AI assistance with sense making and with a plan of action

  Developers want to get to context fast but need to find and ingest a lot of information, and often they are not sure where to begin. “The AI agent is way more efficient to do that,” one of the interviewees said, echoed by many others. At this stage, AI assistance can take the form of parsing a lot of information, synthesizing it, and surfacing highlights to focus the developer’s attention. While developers were eager to get AI assistance with the sense making process, they pointed out that they still want to have oversight. They want to see what sources the AI tool is using, and be able to input additional sources that are situationally relevant or unknown to the AI. An interviewee put it like this: “There’s context in what humans know that without it AI tools wouldn’t suggest something valuable.”

  Developers also find it overwhelming to determine the specific steps to solve a problem or perform a task. This activity is inherently open-ended—developers suffer from cognitive load as they evaluate different courses of actions and attempt to reason about tradeoffs, implications, and the relative importance of tighter scope (for example, solving this problem now) versus broader scope (for example, investing more effort now to produce a more durable solution). Developers are looking for AI input here to get them past the intimidation of the blank canvas. Can AI propose a plan—or more than one—and argue the pros and cons of each? Developers want to skip over the initial brainstorming and start with some strawman options to evaluate, or use as prompts for further brainstorming. As with the process of sense making, developers still want to exercise oversight over the AI, and be able to edit or cherry-pick steps in the plan.

  Finding 5: Developers are cautious about AI autonomy in decision making or implementation

  While there are areas where developers welcome AI input, it is equally important to understand where they are skeptical about it, and why.

  Perhaps unsurprisingly, developers want to retain control of all decision making while they work on complex tasks and large changes. We mentioned earlier how developers’ identity is tied to complex programming tasks and problems, and that they see themselves ultimately responsible and accountable for them. As such, while AI tools can be helpful by simplifying context and providing alternatives, developers want to retain executive oversight of all decisions.

  Developers were also hesitant to let AI tools handle implementation autonomously. There were two concerns at the root of developers’ reluctance:

  • Today’s AI is perceived as insufficiently reliable to handle implementation autonomously. That’s a fair point; we have seen many examples of models providing inaccurate results to even trivial questions and tasks. It may also be a reflection of the technical limitations today. As models and capabilities improve, developers’ perceptions may shift.
  • AI is perceived as a threat to the value of developers. There was concern that autonomous implementation removes the value developers contribute today, in addition to compromising their understanding of code and learning opportunities. This suggests a design goal for AI tools: aiding developers to acquire and refresh mental models quickly, and enabling them to pivot in and out of implementation details. These tools must aid learning, even as they implement changes on behalf of the developer.

  What do the findings mean for developers?

  The first wave of AI tools provide a second pair of hands for developers, bringing them the delight of doing less boilerplate work while saving them time. As we look forward, saving developers mental energy—an equally finite and critical resource—is the next frontier. We must help developers tackle complexity by also arming them with a second brain. Unlocking developer happiness seems to be correlated with experiencing lower cognitive burden. AI tools and agents lower the barriers to creation and experimentation in software development through the use of natural language as well as techniques that conserve developers’ attention for the tasks which remain the province of humans.

  We anticipate that partnership with AI will naturally result in developers shifting up a level of abstraction in how they think and work. Developers will likely become “systems thinkers,” focusing on specifying the behavior of systems and applications that solve problems and address opportunities, steering and supervising what AI tools produce, and intervening when they have to. Systems thinking has always been a virtuous quality of software developers, but it is frequently viewed as the responsibility of experienced developers. As the mechanical work of development is transferred from developers to AI tooling, systems thinking will become a skill that developers can exercise earlier in their careers, accelerating their growth. Such a path will not only enable more developers to tackle increasing complexity, but will also create clear boundaries between their value/identity and the role that AI tools play in their workflow.

  We recently discussed these implications for developers in a panel at GitHub Universe 2023. Check out the recording for a more thorough view!

  How are we using these findings?

  Based on the findings from our interviews, we realize that a successful developer-AI partnership is one that plays to the strengths of each partner. AI tools and models today have efficiency advantages in parsing, summarizing, and synthesizing a lot of information quickly. Additionally, we can leverage AI agents to recommend and critique plans of action for complex tasks. Combined, these two AI affordances can provide developers with an AI-native workflow that lowers the high mental tax at the start of tasks, and helps tackle the complexity of making larger changes to a codebase. On the other side of the partnership, developers remain the best judges of whether a proposed course of action is the best one. Developers also have situational and contextual knowledge that makes their decisions and implementation direction unique, and the ideal reference point for AI assistance.

  At the same time, we realize from the interviews how critical steerability and transparency are for developers when it comes to working with AI tools. When developers envision deeper, more meaningful integration of AI into their workflows, they envision AI tools that help them to think, but do not think for them. They envision AI tools that are involved in the act of sense making and crafting plans of action, but do not perform actions without oversight, consent, review, or approval. It is this transparency and steerability that will keep developers in the loop and in control even as AI tools become capable of more autonomous action.

  Finally, there is a lot of room for AI tools to earn developers’ trust in their output. This trust is not established today, and will take some time to build, provided that AI tools demonstrate reliable behavior. As one of our interviewees described it: “The AI shouldn’t have full autonomy to do whatever it sees best. Once the AI has a better understanding, you can give more control to the AI agent.” In the meantime, it is critical that developers can easily validate any AI-suggested changes—“The AI agent needs to sell you on the approach. It would be nice if you could have a virtual run through of the execution of the plan,” our interviewee continued.

  These design principles—derived from the developer interviews—are informing how we are building Copilot Workspace at GitHub Next. Copilot Workspace is our vision of a developer partnering with AI from a task description all the way to the implementation that becomes a pull request. Context is derived from everything contained in the task description, supporting developers’ sense making, and the AI agent in Copilot Workspace proposes a plan of action. To ensure steerability and transparency, developers can edit the plan and, once they choose to implement it, they can inspect and edit all the Copilot-suggested changes. Copilot Workspace also supports validating the changes by building and testing them. The workflow ends—as it typically would—with the developer creating a pull request to share their changes with the rest of their team for review.

  This is just the beginning of our vision. Empowering developers with AI manifests differently over time, as tools get normalized, AI capabilities expand, and developers’ behavior adapts. The next wave of value will come from evolving AI tools to be a second brain, through natural language, AI agents, visual programming, and other advancements. As we bring new workflows to developers, we remain vigilant about not overstepping. Software creation will change sooner than we think, and our goal is to reinforce developers’ ownership, understanding, and learning of code and systems in new ways as well. As we make consequential technical leaps forward we also remain user-centric—listening to and understanding developers’ sentiment and needs, informing our own perspective as we go.

  Who did we interview?

  In this round of interviews, we recruited 25 US-based participants, working full-time as software engineers. Eighteen of the interviewees (72%) were favorable towards AI tools, while seven interviewees (28%) self-identified as AI skeptics. Participants worked in organizations of various sizes (64% in Large or Extra-Large Enterprises, 32% in Small or Medium Enterprises, and 4% in a startup). Finally, we recruited participants across the spectrum of years of professional experience (32% had 0-5 years experience, 44% had 6-10 years, 16% had 11-15 years, and 8% had over 16 years of experience).

  We are grateful to all the developers who participated in the interviews—your input is invaluable as we continue to invest in the AI-powered developer experience of tomorrow.

  The post A developer’s second brain: Reducing complexity through partnership with AI appeared first on The GitHub Blog.

  
  
  https://github.blog/2024-01-17-a-developers-second-brain-reducing-complexity-through-partnership-with-ai/
• 

  How we organize and get things done with SERVICEOWNERS
  • sorangutan  

  1
  1
  Posts
  17
  Views

  

  GitHub’s primary codebase is a large Ruby on Rails monolith with over 4.2 million lines of code across roughly 30,000 files. As the platform has grown over the years, we have come to realize that we need a new way to organize and think about the systems we run. Our traditional approach to organizing Hubbers and code has been through CODEOWNERS in combination with GitHub teams, organizations, issues, and repositories. However, as GitHub’s user base continues to grow, we have discovered we need a new layer of abstraction. This is where SERVICEOWNERS comes in.

  Service-oriented architecture is not new, but we do not talk often about how large engineering teams organize around services–especially in a hybrid monolith/services architecture. GitHub engineering determined that we were missing a layer in between CODEOWNERS, how we group humans, and work to be done. Injecting a “service” layer between groups of functionality and the people maintaining them opens up a number of interesting possibilities.

  One side-effect of adopting SERVICEOWNERS was realizing that the “ownership” model does not quite express how we work. Given our place in the open source ecosystem and what we value as a company, we thought the “maintainer” model more accurately describes the relationships between services and teams. So, no team “owns” anything, but instead they “maintain” various services.

  Consistent, company-wide grouping

  Achieving consistency in how we map running code–both within and without our monolith–to humans has had a number of positive outcomes. It promotes a shared lexicon, and, therefore, a shared understanding. The durability of services reduces the disruption of team reorganization. As priorities shift, services stay the same and require only minimal updates to yaml metadata to be accurate. Consistency in our service definitions also allows us to centralize information about the services we run into a service catalog. Our service catalog is the one-stop shop for up-to-date information on the services that power GitHub. Within the catalog, Hubbers of all stripes can find information on, for example, how a service is performing vis-a-vis an SLO. Each service in the service catalog also has a number of scorecards as part of our fundamentals program.

  With clearly defined services collected in a service catalog, we can easily visualize the relationships between services. We can identify dependencies and map how information flows through the platform. All this information improves the onboarding experience for new engineers, too, as the relationships between services define the platform architecture—without having to rely on out-of-date docs or hand-waving to explain our architecture.

  The service catalog also has the huge benefit of centralizing information about which teams maintain which services, how to reach an on-call engineer, and what expectations the service has set in terms of support SLAs. Clean lines of communication to maintainers of running services has been a huge help in reducing our incident remediation time. Incident commanders know how to contact on-call engineers because they can find it in the service catalog. All of this is only possible thanks to SERVICEOWNERS.

  How it works

  

  The SERVICEOWNERS file

  A SERVICEOWNERS file lives next to the CODEOWNERS file within our monolith. Like a traditional CODEOWNERS file, SERVICEOWNERS consists of a series of glob patterns (for example, app/api/integration*), directory names (for example, config/access_control/) and filenames (for example, app/api/grants.rb) followed by a service name (for example :apps maps to the team github/apps). Our CI enforces rules like:

  • There can be no duplicate patterns/directories/files in SERVICEOWNERS.
  • All new files added to the github/github repository must have a service owner.
  • All patterns/directories/files must match at least one existing file.
  • Files matched by multiple glob patterns must be disambiguated by a file or directory definition.

  The service-mappings.yaml file

  A service-mappings file defines how services referenced in the SERVICEOWNERS file relate to services in the service catalog and GitHub teams. This configuration can define a service’s product manager, engineering manager, repository, and chat information. Service mappings can also define information about a service’s various classifications, such as its “tier” rating, with zero being critical to the GitHub platform and three being experimental/non-critical.

  The serviceowners gem

  We have developed a Ruby gem we integrate with our Rails app that combines data from the SERVICEOWNERS and service-mappings files to produce several types of output. The serviceowners gem generates our CODEOWNERS file. So, instead of manually updating CODEOWNERS, changing which team or teams maintain a service is a one-line YAML change. The serviceowners gem also has an executable which allows engineers to query information about the maintainer of a file or which files a service maintains.

  Because it’s GitHub, there’s of course also a chat-op for that:

  me: hubot serviceowners for test/jobs/do_the_thing_with_the_stuff_test.rb

  hubot: The file test/jobs/do_the_thing_with_the_stuff_test.rb is part of the github/some_service service and is maintained by the cool-fun-team team who can be reached in #hijinx.

  The ownership.yaml file

  The above examples mostly focus on breaking up the monolith into services, but our service catalog can slurp up service information from any repository within the GitHub org that has an ownership.yaml file. Like the service-mappings file, ownership expresses version controlled values for various service metadata. This allows us to have the boundaries of a service span across multiple repositories; for example, the GitHub Desktop app can have a component service within the monolith while also having its own standalone artifact from a different repository. Another benefit of the ownership file is that it allows us to focus code changes to the monolith codebase primarily around functionality and not maintainership.

  Conclusion

  The combination of CODEOWNERS and SERVICEOWNERS has provided serious value for us at GitHub. The tooling we continue to build atop these primitives will serve to make maintaining services clearer and easier. That’s good news for the future of GitHub. It also pairs quite nicely with our open source identity and access management project, entitlements, too. If SERVICEOWNERS sounds like something your organization, open source or corporate alike, would benefit from, let us know on X at @github.

  The post How we organize and get things done with SERVICEOWNERS appeared first on The GitHub Blog.

  
  
  https://github.blog/2023-12-19-how-we-organize-and-get-things-done-with-serviceowners/
• 

  GitHub Availability Report: November 2023
  • sorangutan  

  1
  1
  Posts
  20
  Views

  

  In November, we experienced one incident that resulted in degraded performance across GitHub services.

  November 3 18:42 UTC (lasting 38 minutes)

  Between 18:42 and 19:20 UTC on November 3, the GitHub authorization service experienced excessive application memory use, leading to failed authorization requests and users getting 404 or error responses on most page and API requests.

  A performance and resilience optimization to the authorization microservice contained a memory leak that was exposed under high traffic. Testing did not expose the service to sufficient traffic to discover the leak, allowing it to graduate to production at 18:37 UTC. The memory leak under high load caused pods to crash repeatedly starting at 18:42 UTC, failing authorization checks in their default closed state. These failures started triggering alerts at 18:44 UTC. Rolling back the authorization service change was delayed as parts of the deployment infrastructure relied on the authorization service and required manual intervention to complete. Rollback completed at 19:08 UTC and all impacted GitHub features recovered after pods came back online.

  To reduce the risk of future deployments, we implemented changes to our rollout strategy by including additional monitoring and checks, which automatically block a deployment from proceeding if key metrics are not satisfactory. To reduce our time to recover in the future, we have removed dependencies between the authorization service and the tools needed to roll back changes.

  ---

  Please follow our status page for real-time updates on status changes and post-incident recaps. To learn more about what we’re working on, check out the GitHub Engineering Blog.

  The post GitHub Availability Report: November 2023 appeared first on The GitHub Blog.

  
  
  https://github.blog/2023-12-13-github-availability-report-november-2023/