How do I check hardware from the obp prompt?
-
To check SCSI based devices, mainly your disks, use probe-scsi-all, but if you get a message asking to reset the system do that first, then run it again
{2} ok probe-scsi-all This command may hang the system if a Stop-A or halt command has been executed. Please type reset-all to reset the system before executing this command. Do you wish to continue? (y/n) {2} ok probe-scsi-all To check IDE devices, normally your CDROM/DVD-ROM {3} ok probe-ide Device 0 ( Primary Master ) Removable ATAPI Model: TOSHIBA ODD-DVD SD-C2732 Device 1 ( Primary Slave ) Not Present Device 2 ( Secondary Master ) Not Present Device 3 ( Secondary Slave ) Not Present
© Lightnetics 2024