How do I check hardware network card & network problems on hp-ux?
-
# landiag (just a link to lanadmin) LOCAL AREA NETWORK ONLINE ADMINISTRATION, Version 1.0 Sat, Jul 15,2006 13:56:21 Copyright 1994 Hewlett Packard Company. All rights are reserved. Test Selection mode. lan = LAN Interface Administration menu = Display this menu quit = Terminate the Administration terse = Do not display command menu verbose = Display command menu Enter command: lan Enter command: display LAN INTERFACE STATUS DISPLAY Sat, Jul 15,2006 13:56:52 PPA Number = 0 Description = lan0 HP PCI Core I/O 1000Base-T Release B.11.11.21 Type (value) = ethernet-csmacd(6) MTU Size = 1500 Speed = 1000000000 Station Address = 0x14c210c243 Administration Status (value) = up(1) Operation Status (value) = up(1) Last Change = 2565 Inbound Octets = 1659734200 Inbound Unicast Packets = 20999237 Inbound Non-Unicast Packets = 1587755 Inbound Discards = 0 Inbound Errors = 0 Inbound Unknown Protocols = 1180643 Outbound Octets = 3228481794 Outbound Unicast Packets = 79030276 Outbound Non-Unicast Packets = 6183 Outbound Discards = 0 Outbound Errors = 0 Outbound Queue Length = 0 Specific = 655367 Press to continue Ethernet-like Statistics Group Index = 1 Alignment Errors = 0 FCS Errors = 0 Single Collision Frames = 0 Multiple Collision Frames = 0 Deferred Transmissions = 0 Late Collisions = 0 Excessive Collisions = 0 Internal MAC Transmit Errors = 0 Carrier Sense Errors = 0 Frames Too Long = 0 Internal MAC Receive Errors = 0 LAN Interface test mode. LAN Interface PPA Number = 0
© Lightnetics 2024