vzctl(8) - utility to control a Container.
-
vzctl(8) System Manager's Manual vzctl(8) NAME vzctl - utility to control a Container. SYNOPSIS vzctl [--quiet | --verbose] create ctid | --ostemplate name} [--private path] [--root path] [--ipadd addr[/mask]] [--hostname name] [--skip_app_templates] [--name name] [--description desc] [--force] vzctl [--quiet | --verbose] reinstall ctid [--skipbackup] [--resetpwdb] [--skipscripts] vzctl runscript ctid script vzctl [--quiet | --verbose] set ctid [--save] [-p, --numproc items[:items]] [--vmguarpages pages[:pages]] [-l, --lockedpages pages[:pages]] [--privvm‐ pages pages[:pages]] [--shmpages pages[:pages]] [-n, --numfile items[:items]] [-f, --numflock items[:items]] [-t, --numpty items[:items]] [-i, --numsiginfo items[:items]] [-e, --numiptent num[:num]] [--swappages num[:num]] [--physpages pages[:pages]] [--ram bytes] [--swap bytes] [--vm_overcommit N] [--diskspace num[:num]] [--quotaugidlimit num] [--jquota on|off] [--cpuunits value] [--cpulimit value] [--cpus value] [--cpumask {N[,N][,N-N]|all|auto}] [--nodemask {N[,N][,N-N]|all}] [--ipadd addr[/mask]] [--ipdel addr|all] [--netif_add <ifname[,mac,host_ifname,host_mac]]>] [--netif_del <ifname>] [--ifname <ifname> [--mac <mac>] [--host_ifname <name>] [--host_mac <mac>] [--ipadd <addr>] [--ipdel <addr>] [--gw <addr>] [--gw6 <addr>] [--dhcp <yes|no>] [--dhcp6 <yes|no>] [--network <id>] [--configure <none|all>]] [--ext_ipadd addr] [--ext_ipdel addr|all] [--hostname name] [--nameserver addr] [--searchdomain name] [--userpasswd user:password [--crypted]] [--onboot yes|no] [--bootorder number] [--rate dev:class:Kbits] [--ratebound yes|no] [--root path] [--noatime yes|no] [--bindmount_add [src:]dst[,nosuid,noexec,nodev] [--bindmount_del dst|all] [--mount_opts opt[,opt]] [--devnodes device:r|w|rw|none] [--netdev_add name] [--netdev_del name] [--pci_add [domain:]bus:slot.func] [--pci_del n[domain:]bus:slot.func] [--iptables name[,...]] [--netfilter mode] [--disabled yes|no] [--applyconfig name] [--setmode restart|ignore] [--description desc] [--name name] [--ioprio prio] [--iolimit limit] [--iopslimit limit] [--features name:on|off[,...]] [--ha_enable yes|no] [--ha_prio number] vzctl [--quiet | --verbose] destroy | mount | umount | start | restart | status | enter | console | vzctl stop ctid|name [--fast] [--skip-umount] vzctl start ctid|name [--wait] [--skip-fsck] vzctl monitor ctid|name|0 vzctl suspend ctid|name vzctl resume ctid|name [--skip-fsck] vzctl snapshot ctid|name [--id uuid] [--name name] [--description desc] vzctl snapshot-switch | snapshot-delete ctid|name --id uuid vzctl snapshot-mount CTID --id uuid --target path vzctl snapshot-umount CTID --id uuid vzctl snapshot-list CTID [-H] [-o field[,field...] [--id uuid] vzctl [--quiet | --verbose] exec | exec2 ctid|name command [arg ...] vzctl convert ctid|name vzctl register path ctid [--force] vzctl unregister ctid|name vzctl --help | --version DESCRIPTION Utility vzctl runs on host server (HS) and performs direct manipulations with Container (CT). Containers can be referred to by numeric ctid (or name which can be assigned with --name option). Note that CT ID <= 100 are reserved for OpenVZ internal purposes. OPTIONS Flags These flags can be used with any vzctl command. --quiet Disables logging to a console (a terminal). Logging to a log file is not affected. --verbose Sets console (terminal) logging level to maximum value. Logging to a log file is not affected. Setting CT parameters set ctid This command sets various CT parameters. If flag --save is given, parameters are saved in CT configuration file ve.conf(5). If CT is currently running, vzctl applies these parameters to CT, in case --setmode option specified apply logic for parameters that can't be applied or tunning CT will be changed, if restart - restart CT, if ignore - ignore error. Parameters that can not be applied runtime are quotaugidlimit, bind‐ mount, features, and iptables. The following options can be used with set command. Miscellaneous parameters --setmode restart|ignore Change default mode for apply parameters that can not be applied on running CT. restart - restart CT, ignore - ignore error. --onboot yes|no Sets whether this CT will be started during system boot up. CT will not be auto-started during system boot up unless this parameter is set to yes. --bootorder number Sets the boot order priority for this CT. The higher the number is, the earlier in the boot process this con‐ tainer starts. By default this parameter is unset, this is considered to be the lowest priority, so contain‐ ers with unset bootorder will start last. --root path Sets path to root directory for this CT. This is essentially a mount point for CT root. Argument can contain literal string $VEID, which will be substituted with numeric CT ID. Changing this parameter is not recom‐ mended, better edit vz(5) global configuration file. --userpasswd user:password Sets password for given user in CT, creating the user if it does not exists. Note that this option is not saved in configuration file at all (so --save flag is useless), it is applied to CT (by modifying its /etc/passwd and /etc/shadow files). If the --crypted parameter is specified, the system assumes that the passwords are encrypted. In case CT root is not mounted, it is automatically mounted, then all appropriate file changes are applied, then it is unmounted. Note that CT area should be created before using this option. --disabled yes|no Disable CT start. For force start disabled CT option --force can be used. --name name Bind CT with name, it allows to use name instead of CT ID. The valid symbols for name are [0-9][aA-Zz][ -_.] and all international symbols. --description desc Assign description for CT. It can be viewed by vzlist(8) utility. Network related parameters --ipadd addr[/mask Adds the IP address and subnet mask for the Container. To assign network masks to Containers operating in the venet0 mode, the USE_VENET_MASK parameter in the Parallels Containers configuration file must be set to "yes". Note that this option is incremental, so addr are added to already existing ones. --ipdel addr | all Removes IP address addr from CT. If you want to remove all addresses, use --ipdel all. --ext_ipadd addr Assign the external IP address to the Container. External IP addresses are considered valid IP addresses by the venet0 adapter, though they are not set as alias addresses inside Containers and are not announced via Address Resolution Protocol (ARP). You can assign the same external IP address to several Containers, irre‐ spective of whether they reside on the same or different Hardware Nodes. --ext_ipdel addr Remove the external IP address from the Container. To delete all external IP addresses assigned to the Con‐ tainer, use ext_ipdel all. --netif_add ifname[,mac,host_ifname,host_mac] Adds virtual ethernet device to given CT. Where ifname is ethernet device name in the CT, mac its MAC address, host_ifname is ethernet device name on the host and host_mac its MAC address. MAC addresses has format like XX:XX:XX:XX:XX:XX. All parameters except ifname are option and automatically generated if not specified. Per-interface configuration. To select the interface to configure, use --ifname name option. --mac XX:XX:XX:XX:XX:XX - MAC address of interface inside CT --host_ifname name - interface name for virtual interface on host server --host_mac XX:XX:XX:XX:XX:XX - MAC address of interface on host server --gw ipaddr - default IPv4 gateway for interface --gw6 ipaddr - default IPv6 gateway for interface --ipadd ipaddr - add IP address(es) to interface --ipdel ipaddr - delete IP address(es) from interface --dhcp yes|no - turn on/off IPv4 dhcp --dhcp6 yes|no - turn on/off IPv6 dhcp --configure none|all - apply/ignore the network settings (gw,ip,dhcp) from the Container configuration file. Configuring any of the network settings automatically sets this option to "all". --network id - connect virtual interface to virtual network with the given id. The valid symbols for network are [0-9][aA-Zz][ -_.#()] and all international symbols. --mac_filter on|off - enable/disable packets filtering by MAC address and MAC changing on veth device inside CT. --netif_del dev_name Removes virtual ethernet device from CT. --hostname name Sets CT hostname and writes it to the appropriate file inside CT (distribution-dependent). --nameserver addr Sets DNS server IP address for CT. If you want to set several nameservers, you should do it at once, so use --nameserver option multiple times in one call to vzctl, as all the name server values set in previous calls to vzctl gets overwritten. --searchdomain name Sets DNS search domains for CT. If you want to set several search domains, you should do it at once, so use --searchdomain option multiple times in one call to vzctl, as all the search domain values set in previous calls to vzctl gets overwritten. Resource limits The following options sets barrier and limit for various user beancounters. Each option requires one or two arguments. In case of one argument, vzctl sets barrier and limit to the same value. In case of two colon-separated arguments, the first is a barrier, and the second is a limit. Arguments are in items, pages or bytes. Note that the page size is architecture-specific, it is 4096 bytes on IA32 platform. There is an ability to accept different suffixes for set parameters (except the parameters that name started with num). E.g. vzctl set XXX --privvmpages 5M:6M should set privvmpages barrier to 5 megabytes and limit to 6 megabytes. Available suffixes are: t, T -- terabytes g, G -- gigabytes m, M -- megabytes k, K -- kilobytes p, P -- pages (page is 4096 bytes on x86 architecture, other arches may differ) -p, --numproc items[:items] Maximum number of processes and kernel-level threads. Setting the barrier and the limit to different values does not make practical sense. --vmguarpages pages[:pages] Memory allocation guarantee. This parameter controls how much memory is available to CT. The barrier is the amount of memory that CT's applications are guaranteed to be able to allocate. The meaning of the limit is currently unspecified; it should be set to 2,147,483,647. -l, --lockedpages pages[:pages] Maximum number of pages acquired by mlock(2). --privvmpages pages[:pages] Allows controlling the amount of memory allocated by the applications. For shared (mapped as MAP_SHARED) pages, each CT really using a memory page is charged for the fraction of the page (depend‐ ing on the number of others using it). For "potentially private" pages (mapped as MAP_PRIVATE), CT is charged either for a fraction of the size or for the full size if the allocated address space. It the latter case, the physical pages associated with the allocated address space may be in memory, in swap or not physically allocated yet. The barrier and the limit of this parameter control the upper boundary of the total size of allocated memory. Note that this upper boundary does not guarantee that CT will be able to allocate that much memory. The primary mechanism to control memory allocation is the --vmguarpages guarantee. --shmpages pages[:pages] Maximum IPC SHM segment size. Setting the barrier and the limit to different values does not make practical sense. -n, --numfile items[:items] Maximum number of open files. Setting the barrier and the limit to different values does not make practical sense. -f, --numflock items[:items] Maximum number of file locks. Safety gap should be between barrier and limit. -t, --numpty items[:items] Number of pseudo-terminals (PTY). Note that in OpenVZ each CT can have no more than 255 PTYs. Setting the barrier and the limit to different values does not make practical sense. -i, --numsiginfo items[:items] Number of siginfo structures. Setting the barrier and the limit to different values does not make practical sense. -e, --numiptent num[:num] Number of iptables (netfilter) entries. Setting the barrier and the limit to different values does not make practical sense. --physpages pages[:pages] This parameter limits the physical memory (RAM) available to processes inside a container. The bar‐ rier is ignored, and the limit sets the limit. --swappages pages[:pages] This parameter limits the amount of swap space that can be allocated to processes running in a Con‐ tainer. --ram bytes The amount of RAM that can be used by the processes of a Container, in bytes. You can use the follow‐ ing suffixes to set RAM in other measurement units: k, K -- kilobytes m, M -- megabytes g, G -- gigabytes t, T -- terabytes --swap bytes The amount of swap space that can be used by the Container for swapping out memory once the RAM is exceeded, in bytes. You can use the following suffixes to set swap in other measurement units: k, K -- kilobytes m, M -- megabytes g, G -- gigabytes t, T -- terabytes --vm_overcommit N This parameter controls the memory allocation guarantee. It is calculated as (physpages + swappages) * N. By default, the parameter is equal to 1. CPU fair scheduler parameters These parameters control CPU usage by CT. --cpuunits num sets CPU weight for CT. Argument is positive non-zero number, which passed to and used in kernel fair scheduler. The larger the number is, the more CPU time this CT get. Maximum value is 500000, minimal is 8. Number is relative to weights of all the other running CTs. If cpuunits not specified default values are used (250 for CT belong to first class, 1000 for CT belong to second class) You can set CPU weight for host server itself as well (use vzctl set 0 --cpuunits num). --cpulimit num Sets the CPU limit, in percent or megahertz (MHz), the Container is not allowed to exceed. By default, the limit is set in percent. To specify the limit in MHz, specify "m" after the value. Note: If the computer has 2 CPUs, the total CPU time equals 200%. --cpus num sets number of CPUs available in the CT. --cpumask {N[,N][N-N]|all|auto} Defines the CPUs on the physical server to use for executing the processes running in the Container. A CPU affinity mask can be a single CPU number or a CPU range separated by commas (0,2,3-10). If used with the --nodemask option, value of auto automatically assigns to a Container all CPUs from the spec‐ ified NUMA node. Without the --nodemask option, it applies the default settings to a Container. --nodemask {N[,N][N-N]|all} Defines the NUMA node on the physical server to use for executing the processes running in the Con‐ tainer. A node mask can be a single number or a range separated by commas (0,2,3-10). --nodemask must be used with the --cpumask option. --iptables name[,...] Restrict access to iptable modules inside CT (by default modules defined in the IPTABLES variable in the global configuration file vz.conf(5) are accessible inside CT). Multiple comma-separated values can be specified. You can use the following values for name: iptable_filter, iptable_mangle, ipt_limit, ipt_multiport, ipt_tos, ipt_TOS, ipt_REJECT, ipt_TCPMSS, ipt_tcpmss, ipt_ttl, ipt_LOG, ipt_length, ip_conntrack, ip_conntrack_ftp, ip_conntrack_irc, ipt_conntrack, ipt_state, ipt_helper, iptable_nat, ip_nat_ftp, ip_nat_irc, ipt_owner. --netfilter mode Restrict access to iptables modules inside the Container. The following modes are available: disabled -- no modules are allowed. stateless -- (default) all modules except NAT and conntracks are allowed. stateful -- all modules except NAT are allowed. full -- all modules are allowed. Network devices control parameters --netdev_add name move network device from host server to specified CT --netdev_del name delete network device from specified CT Disk quota parameters --diskspace num[:num] Sets soft and hard disk quotas, in blocks. First parameter is soft quota, second is hard quota. One block is currently equal to 1Kb. --quotaugidlimit num sets maximum number of user/group IDs in CT for which disk quota in CT will be accounted. If this value is set to 0, user and group quotas will not be accounted inside CT. Note that if you have previously set value of this parameter to 0, changing it while CT is running will not take effect. --jquota on|off Enables or disables journaled user/group quota for a ploop- based Container. Journaled quota is enabled by default. Traffic shaping parameters --rate dev:class:Kbits Sets CT output bandwidth over specified network interface for specified traffic class. Traffic classes must be described in networks_classes(5) file. --ratebound yes|no If this parameter is set to yes then CT output bandwidth specified by --rate option will be bandwidth limit and guarantee. Otherwise --rate sets CT output bandwidth guarantee for traffic and limit is set by TOTALRATE global option. Mount option --noatime yes|no Sets noatime flag (do not update inode access times) on file system. Default is yes for CT with class_id=1, otherwise no. --mount_opts opt[,opt] Specify the set of mount options for ploop-based Containers. The supported options are pfcache_csum (enables the cached ext4 file system) and nopfcache_csum (disables the cached ext4 file system). --bindmount_add [src:]dst[,nosuid,noexec,nodev] On CT start directory src will be mounted under CT $VE_ROOT/dst. If the src directory is not speci‐ fied, it is created under $VE_PRIVATE/mnt/dst with permissions taken from CT $VE_ROOT/dst. --bindmount_del dst|all Remove directory dst from config file Device access management --devnodes device:r|w|rw|none Give access (r - read, w - write, rw - read/write, none - no access) to special file /dev/device from CT. I/O priority management --ioprio priority Assigns I/O priority to CT. Priority range is 0-7. The greater priority is, the more time for I/O activity CT has. By default each CT has priority of 4. --iolimit limit[B|K|M|G] Assigns I/O limit to CT. If no suffix is provided, the value is assumed to be in bytes per second. Available suffixes are: b, B -- bytes k, K -- kilobytes m, M -- megabytes g, G -- gigabytes t, T -- terabytes By default each CT has limit of 0 (unlimited). The maximum disk I/O bandwidth limit you can set for a Container is 2 GB per second. --iopslimit limit Assigns Input/Output Operations Per Second limit to CT. Features management --features name:on|off[,...] Enable/disable feature for CT. Supported features are: nfs, ipip, sit, ppp, ipgre, bridge, nfsd. Mul‐ tiple comma-separated values can be specified. PCI device management --pci_add [domain:]bus:slot.func Give the container an access to a PCI device. All numbers are hexadecimal as printed by lspci(8) in the first column. --pci_del [domain:]bus:slot.func Delete PCI device from the container. Apply config --applyconfig name Read CT parameters from CT sample configuration file /etc/vz/conf/ve-name.conf-sample, and apply them, if --save option specified save to CT config file. The following parameters are not changed: HOSTNAME, IP_ADDRESS, TEMPLATE, OSTEMPLATE, VE_ROOT, VE_PRIVATE. High Availability Cluster --ha_enable yes|no Adds the Container to (yes) or removes it (no) from the High Availability Cluster. By default, the parameter is set to yes. --ha_prio number Sets the Container priority in the High Availability Cluster. Containers with a higher priority are restarted first in the case of a system failure. If the parameter is not set for a Container (default), it has the lowest priority and is restarted after all Containers with any priorities set. Performing CT actions create ctid [--ostemplate name] [--config name] [--private path] [--root path] [--name name] [--descrip‐ tion desc] [--force] Creates CT area. This operation should be done once, before the first startup of CT. If the --config name option is specified, values from example configuration file /etc/vz/conf/ve- name.conf-sample are put into CT configuration file. If CT configuration file already exists, it will be removed. You can use --root path option to sets the path to the mount point for CT root directory (default is VE_ROOT specified in vz(5) file). Argument can contain literal string $VEID, which will be substituted with numeric CT ID. You can use --private path option to set the path to directory in which all the files and directories specific to this very CT are stored (default is VE_PRIVATE specified in vz(5) file). Argument can con‐ tain literal string $VEID, which will be substituted with numeric CT ID. You can use the --force option to create a Container if your storage/disk drive has less than 10 GB of free disk space. destroy|delete ctid Removes CT private area by deleting all files, directories and configuration file of this CT. Also delete command can be used as alias for destroy. start ctid [--wait] [--skip-fsck] Mounts (if necessary) and starts CT, if --wait option specified wait until default runlevel is entered. If the --skip-fsck option is specified, the filesystem check will be skipped. stop ctid [--fast] [--skip-umount] Stops the Container and unmounts it (unless --skip-umount is given). Normally, to stop a Container, halt(8) is executed inside; option --fast makes vzctl use reboot(2) syscall instead which is faster but can lead to unclean Container shutdown. restart ctid [--wait] Restart CT, stop if running and start. if --wait option specified wait until default runlevel is entered. status ctid Shows CT status. Basically this is a line with five or six words separated by spaces. First word is literally VEID. Second word is numeric CT ID. Third word is showing whether CT exists or not, it can be either exist or deleted. Fourth word is showing the status of CT filesystem, it can be either mounted or unmounted. Fifth word shows if CT is running, it can be either running or down. Sixth word, if exists, is suspended. It appears if a dump file exists for a stopped container (see suspend). This command can also be usable from scripts. mount ctid Mounts CT private area. umount ctid Unmounts CT private area. Note that stop does umount automatically. exec ctid command Executes command in CT. Environment variables are not set inside CT. Signal handlers may differ from default settings. If command is -, commands are read from stdin. exec2 ctid command The same as exec, but return code is that of command. enter ctid Enters into CT. This option is a back-door for host root only. console ctid [-s|--start] [N] Attach to the Container's console tty number N. If N is not specified, 2 (i.e. tty2) is used. Use 1 to attach to Container's system console, see log messages from init etc. Note that you can even attach to a console if a Container is not yet running. To exit from the console, press "Esc" then "." (note this sequence is only recognized after Enter). If option --start is given, vzctl doesn't attach to a console, instead it starts getty for ttyN. Usu‐ ally, getty is preconfigured to start on tty1 and tty2 only. reinstall ctid [--skipbackup] [--resetpwdb] [--scripts script] [--skipscripts] [--vzpkg_opts opts] The reinstall command creates a new private area, installs all applications, copies CT credentials from the old CT (unless --resetpwdb is given), and moves old CT private area to /old directory (unless --skipbackup option is given). To customize the reinstall process, two scripts should be created. The first one, vps.reinstall, creates a new private area. If this script exits with exit code of 128, it indicates that standard reinstall procedure will be done. The second script, vps.configure, is run inside CT there the old CT is mounted under '/old' directory. reinstall ctid [--listscripts] [--desc] List reinstall scripts if --desc option specified output description. runscript ctid Run the specified shell script in the Container. For a running Container, the command jumps into the Container and runs the script. For a stopped Container, it enters the Container, mounts the root (/) filesystem, and executes the script. In this case, only a process for the vzctl session, the script, and processes launched by the script are running in the Container. monitor ctid | 0 Display in real-time actions or events for ctid. In case ctid is 0, display actions and events for all CTs. Valid only on 2.6 kernel. convert ctid In OpenVZ, Containers use the new layout. The convert command converts a Container from the old layout to a new one. register path ctid [--force Register the Container using the configuration file path/ve.conf and having ID ctid. If the --force option is specified, all validation checks will be skipped. unregister ctid|name Unregister the specified Container. Suspend/Restore Checkpointing is an extension of OpenVZ kernel 2.6 which allows to save full state of running CT and to restore it later. suspend ctid This command saves all the state of running CT to a dump file and stops the CT. The dump files is named /VE_PRIVATE/dump/Dump. resume ctid [--skip-fsck] This command restores CT from dump file created by suspend command. The start or resume actions will invalidate dump file so it will be removed. If the --skip-fsck option is specified, the filesystem check will be skipped. Snapshotting Snapshotting is a feature based on checkpointing and ploop shapshots. It allows to save a complete state of container file system. Plus, if the container is running, it's in-memory state (as in checkpointing). Note that snapshot functionality is only working for containers on ploop device. snapshot CTID [--id uuid] Creates a container snapshot. If uuid is not specified, it is auto-generated. If a container is running, it's checkpointed and then restored. If a container is not running, only file system state is saved. snapshot-switch CTID --id uuid Switches the container to a snapshot identified by uuid. Note that the current container state and its file system state is lost! If given snapshot contains CT memory dump, it is restored, other‐ wise it is stopped. snapshot-delete CTID --id uuid Removes a specified snapshot. snapshot-mount CTID --id uuid --target path Mounts a snapshot specified by uuid to path. Note that this is read-only mount. snapshot-umount CTID --id uuid Unmounts the snapshot specified by uuid. snapshot-list CTID [-H] [-o field[,field...] [--id uuid] Lists all snapshots. Active snapshot is marked with * sign. You can suppress displaying header using -H option. You can use the -o option to display only the specified field(s). List of available fields can be obtained using -L option. Other options --help Prints help message with a brief list of possible options. --version Prints vzctl version. DIAGNOSTICS vzctl returns 0 upon successful execution. If something goes wrong, it returns an appropriate error code. System errors 1 Setting UBC parameters failed 2 Setting fair scheduler parameters failed 3 System error 4 Not enough memory error 5 Kernel does not have support for CT, or some VZ modules are not loaded 6 Not enough system resources 7 Creation of the virtual server failed 8 Command run by vzctl exec returned non-zero exit status 9 CT is locked by another vzctl operation 10 Global configuration file not found 14 CT configuration file not found 11 One of vzctl helper scripts not found 12 VZ license not loaded, or invalid class ID Parameter errors 20 Invalid command line parameter 21 Invalid value for command line parameter 22 CT root directory is not set 23 CT private directory is not set 24 CT template directory is not set 25 Traffic shaping parameter RATE is not set 26 Traffic shaping parameter TOTALRATE is not set 27 Not all needed parameters set, unable to start CT 28 Not all UBC parameters set, unable to start CT 29 Package set parameter is not specified during create 30 Traffic shaping parameter BANDWIDTH is not set 76 Class ID is not set 77 Lock dir is not set 133 Failed to setup CT start wait functionality CT errors 31 CT is not running 32 CT is already running 33 Unable to stop CT 79 Per CT action script returned with error 85 CT config file contain invalid data (belong to diferent config versions) 105 CT start disabled 140 Failed to register CT 141 CT owner check failed 142 Failed to unregister CT File system errors 40 CT area is not mounted 41 CT area is mounted, can not destroy CT area 43 CT private area does not exist 44 CT private area already exists 46 Not enough disk space 47 CT private area is not created properly 48 Can not create new CT private area 49 Can not create mount point 50 Can not mount CT private area 51 Can not umount CT private area 52 Error deleting CT private area 53 Unknown mount type 54 Can not create directory 56 Unsupported /sbin/init 82 Can't copy sample config file, or sample config file not exist Disk quota errors 60 Error during "quota on" operation 66 Error during "quota off" operation 61 Error during "quota init" operation 62 Error during "quota set" operation 67 Ugid quota can not be turned ON on mounted CT. It must be initialized first. 63 Can not init quota - disk space limit is not set 64 Can not init quota - disk inode limit is not set 65 Can not set ugid quota limit Errors of vzctl set 70 Invalid host name 71 Invalid IP address 72 Invalid DNS server address 73 Invalid DNS domain name 74 Error changing password 34 Error adding IP address 78 IP address already in use 106 Error setting iptables parameter 135 Error setting meminfo parameter 137 Can not set CT name 146 Error setting cpumask parameter 147 Unable to configure PCI device 148 Error setting IO parameters 149 Error setting nodemask parameter Traffic shaping error 80 Can not set up traffic shaping Traffic accounting error 81 Can not set up traffic accounting Template error 91 Private area tarball not found. 87 Unable to install applications. Reinstall error 93 Unable to get installed packages 94 Reinstall error 55 Not enough quota limits to create temporary CT Checkpointing error 16 Checkpoint error 17 Restore error Ploop errors 151 Failed to create ploop image 152 Failed to mount ploop image 153 Failed to unmount ploop image 154 Failed to resize ploop image 155 Failed to convert CT to ploop 156 Failed to create ploop snapshot 157 Failed to merge ploop snapshots 158 Failed to delete ploop snapshot 159 Failed to switch to snapshot 160 Failed to mount ploop snapshot EXAMPLES To create and start "light" CT with ID 1000 using centos-6 package set, and IP address 192.168.10.200: vzctl create 1000 --ostemplate centos-6 --config light vzctl set 1000 --ipadd 192.168.10.200 --save vzctl start 1000 To set number of processes barrier/limit to 80/100 processes and PTY barrier/limit to 16/20 PTYs: vzctl set 1000 --numproc 80:100 -t 16:20 --save To execute command ls -la in this CT: vzctl exec 1000 /bin/ls -la To execute command pipe ls -l / | sort in this CT: vzctl exec 1000 /bin/sh -c 'ls -l / | sort' To stop this CT: vzctl stop 1000 To permanently remove this CT: vzctl destroy 1000 FILES /etc/vz/vz.conf /etc/vz/conf/CTID.conf /proc/vz/veinfo /proc/vz/vzquota /proc/user_beancounters /proc/fairsched SEE ALSO vz(5), ve.conf(5), networks_classes(5), vzquota(8), vzcreate(8), vz-start(5), vz-stop(5). COPYRIGHT Copyright (c) 1999-2015 Parallels IP Holdings GmbH. All rights reserved. OpenVZ May 2011 vzctl(8)
© Lightnetics 2024